All About Nitro RC Receiver Batteries
ฝัง
- เผยแพร่เมื่อ 13 ต.ค. 2024
- Hope this helps...
My Amazon Wish List www.amazon.co....
Join this channel to get access to perks:
/ @haggardrc
Please check out my Wish list and anything you may send me will leave me eternally grateful ;)
Rusty's Amazon Wish List: amzn.eu/3TJm7Rf
You can help me make better content by donating Via PayPal as a gift to RustySkullProductions@hotmail.com!
Or you can use this link: paypal.me/Rust...
Every penny that is donated will go into making good quality videos for all my loyal subscribers!
Many thanks to you all :)
#RC #NitroRC #Nitrohelp
You can connect a hump straight to the receiver if you ever have a switch problem. A lot of racers use bullet connectors to completely bypass a switch.
Rechargeable AA NiMH been around since 2006 or so. But today AA are ok. You can still use those for a first nitro RC.
nice one , yes first thing to do switch to 6v reciver pack for sure also get longer range
i switch to life-po 6,6v reciver pack they last even longer and longer storrage life and more power
Speaking of those stupid AA packs, my savage came with that and I need to change to a hump pack. It's a work in progress. Slowly but surely I'll get there. Expensive hobby for sure and one part at a time.
If you run a servo on 4.8v Will it be a lot weaker than running it on 7.4v? i just upgreaded myn and seems weaker than the factory one was even that was pretty weak.
Of course, lower volts = less power
Wow your coming back strong keep up the great work love the tech vids 💪👍👊
Just wondering what if I want to lower idle screw but servo arm is set in a fixed position on transmitter, will it not lower it because the servo arm won't let it go back, should I then set that on transmitter thanks
Yeah so the servo needs to be set to let the arm go back enough too
@@HaggardRC thanks I will do that next time at track.
@@HaggardRC is it epa or subtrim
Instead of hump pack can I use a small 2s lipo??
Depends if you have HV servos and receiver
I see you can buy LiFe batterys for receiver pack that are 6.6v can i use this on my standard receiver i know my servos are ok there the ebay specials take upto 7.4v but receiver i dont know
If you have high voltage servos then use you can use 6.6-7.4v but if not then I’d stick with a 6v battery.
@@HaggardRC but i dont know if the receiver will be ok as jsut a stock kyosho one from a RTR mp9 as i know other receivers say they can take life or lipo
Those are 6v so use a 6v battery 🙃
Hi there, these hump packs they have 5 cells inside, so do we charge them as 5s or as 1s
Neither, you charge them as NiMh and the amps that it is. For example a 1,600Mah you can charge at 1.6A or below. Some people charge them higher but I don’t:
@@HaggardRC I'm using a hitec rdx1 but it asks for how many cells, like 1s-15s
I have never used a rechargeable battery for my nitro cars because you will have a runaway one day I've always used regular batteries and never had that problem I'm talking about over 20years experience 😮😎👍
Hiya mate could you do a video on fitting a charge switch so you don’t have to pull the hump pack out to charge it
I already have a video on that dude
@@HaggardRC fair one mate il go and have a look for it cheers dude 😄
Can you explain what tread patterns do on tyres I’m confused!
Alright I will do
🤔 how do people do not no battery to put in aNitro car 👨🏫👍
I use lead acid 12v easy