Revving the Mud Wagon's 600HP Monster to the Max - Carcass S1, E7
ฝัง
- เผยแพร่เมื่อ 5 ส.ค. 2020
- The Carcass team prep the Willys cab for a hefty chassis, and give the undercarriage of their military ambulance a lift with some suspension upgrades.
Check out the PowerNation store for shirts, hats, and more: pntv.us/lnk_f8a2aba5
Want to watch POWERNATION completely ad-free? Subscribe at the link below and receive the first month for just 99 cents:
pntv.us/lnk_3d0d9e0c
Follow POWERNATION Everywhere:
www.powernationtv.com
/ powernationtv
/ powernationtv
PARTS USED IN THIS EPISODE:
Eaton Corporation: Eaton ELocker
More Info: pntv.us/pn_pt_16334_5f0cd0bc5b857
Permatex: Permatex Red Threadlocker
More Info: pntv.us/pn_pt_16335_5f0cd0f6f005b
RockAuto.com: Rock Auto - Leaf Spring Shackle
More Info: pntv.us/pn_pt_16337_5f0cd1cbe959d
Supplied by Summit: Richmond Gear - Ring and Pinion Install Kit
More Info: pntv.us/pn_pt_16345_5f10b34af18bb
Supplied by Summit: Skyjacker Shackle Bushings
More Info: pntv.us/pn_pt_16346_5f10b37eb205b
Supplied by Summit: Summit Racing Fuel Cell
More Info: pntv.us/pn_pt_16347_5f10b3bb5fb14
Supplied by Summit: Yukon Gear and Axle - Drive Flange Kit
More Info: pntv.us/pn_pt_16348_5f10b3fc23c1b
BDS Suspension: BDS Suspension Lift with Nitro Shocks
Matco Tools: MATCO Tools are the Official Tool Supplier to PowerNation
The Industrial Depot: Tools, Hardware, Shop Supplies - ยานยนต์และพาหนะ
Loved that Pat from Engine Power explained the method behind the dyno runs. I've always wondered about this part of the process.
I don't like how almost all of the jeep is tossed, but I do like where this is going.
Pat: "this makes me grin large" *frowns*
Was a machinist for about 10 years and I'm liking those drill bits lol looks way easier than standard bits..
When are you guys gonna do a torque monster Buick Nailhead build?
"Careful not to let it come crashing down"
Let's it come crashing down
Looks like the u-bolts aren't long enough, they only thread half way up the nut.
How many gallons of hair gel did you go through in this episode ?😉
I agree with the guy who said the body still isn’t sitting correctly, but I’m thinking the rear axle needs to be centered in the wheel well
My dads had two of these back to back. The first one was a stock restoration and the two door is a 350/350 combos on a newer pickup chassis.
With that hole in the pumpkin ;unless you seal it , everytime you go in the mud or water you contaminate the gear oil. You didn't mention any sealant or wire boot ; that would be an expensive replacement or change the oil everytime.
Good catch, man.
I was wondering about that too
At 5:57 you can see the plug for the hole on the wires. The shoulda mentioned it. I would put some rtv on it as well to be 100% positive
Wasted not one, but two good 4x4s.
Yeah like they could have just built both trucks...
Carcass is a killer Metal Band ;)
I've never seen someone bounce around so much while talking. Looks like this guy is standing on a trampoline every time they do a close up.
Great grandioso programa
What if you did a complete engine build. Cheap vs expensive parts?
Should have done a shakle flip
Y'all are working in that nice shop with $100k in tools, but you don't have a chop saw table or even a couple jack stands? Just cut shit out and let it drop ? Ffs
👍,great show.build something uncommon.
Guys what's up with the sweeping cuts scenes? I'm getting motion sick watching this...
It's also a waste of time.
When the video had more time, looking at the two goof balls and one minute of video time on the running engine SMH.
Only 600hp.? You can get this hp today in a grocery getter!!!!
Yeah, they are afraid to throw power at stuff.
They broke it once. So they may be gun-shy to give it the beans.
Junkyard 6.0, ebay turbo kit.... Way over 600 lol
What camera do you guys use
No sealing the diff? Either gonna splash gear oil out or water in. Really hope they sealed that off camera
Tall & narrow it will roll over in a stiff breeze.
Buy two trucks, throw away 90%.
Why didn't they replace the hardware on the spring shackles? Seems like a no brainer...
About 11:00 amish Mike got a good start on a beard walking from the 4x4 shop to the dyno. Another cringy script and some cool parts.
Good eye to catch that! He goes from freshly shave to a weak beard in just a short walk to the dyno. Dude can grow some facial hair fast!
these guys are butchers and hack jobbie pros.. started with a perfectly fine MILITARY vehicle chopped it up and placed another military design ontop of it. for the time and energy wasted they could have started with a war time willys or a powerwagon and ended up in the same spot with half as much effort
Yeah no brainer on the 1300 dollar locker lmfao
You drilled a hole in the housing, wwill that leak out the differential lubricating fluid?
The plug has a rubber gasket on it, so it won't leak fluids.
I’d be like...why the hell is the crank pulley smaller than the blower pulley?
Overdriving the blower.
OzarksWildman they wanted to decrease the boost so bigger pulley=lower boost
K.D. Pearce Underdriving*
I have a challenge for the carcass team
Why would you make it higher you all ready need a freight elevator to into the dang thing
The sponsor said so!!
In the intro you said you save left for dead cars, but both cars looked far and I mean far from dead beforehand. Love the show tho.
You got to expect from the newer generation .
Take two perfectly good 4x4s and hack them into one weird looking one.
Rebuild a 1950 Ford f1 and put a Chevy 302 in it then use a 4x4 f150 4 speed transmission with front axle and gearbox then stiffen the suspension and do rust work
Yeah Dynoing is super challenging LMAO
"I'm not going to let you hurt it." We've already done that once.
Why would you put a blower that big on a small block
😁✌🖖👌👍😎very cool
Rebuild a c223 engine please
I was hoping way more then 600 ho
How much y’all want to rebuild my 2v 4.6 lol
ewww
basshead to each is there own
You should step up your game, bro.
basshead that’s not my only whip? I’m in Southern Indiana I’ll meet you at edegewater motor sports park n show u my game gates open at 1 on the weekend.😂 you simp
The back wheels gonna rip the body off it’s not even centered 🤦🏻♂️ sad how good this show used to be and what it’s turned into now
"The Cringe Is Triple C Strong With These 2"
"The Cringe Is Triple H Strong With These 2"
If You Don't Know?????
"Triple C Cringe=UFC/Retired Fly/Bantom Weight Champ&Gold Medal Winner At Olympics In Freestyle Wrestling"
"Triple H Cringe=WWF/WWE Became CHAMP Of Banging Vince McMahons Daughter"
Well
"If You Don't Know?"
"Now You Know!"
😂😂😂😂😂😂
You need to look at the camera like you are talking to the person who is watching. It is like being ignored while you have a conversation with someone else. I dont care much for carcass because it is not personal it's like look at me do stupid shit.
That is sad
This is a bum show, why can't we have a show about working on cars and trucks! Bring back the old show.....
1
Reee
so many arm chair warrior keyboard critics........don't watch anymore episodes then....problem solved........
Exactly
It's almost like they are watching something they don't like on purpose, just to get mad
No cardboard, no problem. Just use paint pen on the windshield. This show is so scripted, I bet it’s in the script on when to pee...
thing was already ridiculously high, then another eight inches.. that thing will be eye candy only.. and unusable.... for most things.. sad they ruined it....
These guys are just puppets for a a program skit. Somebodys idea of a car show with drama . This sucks not a good idea get the point !
These two are clowns not impressed
first!
Bet you’re first a lot 🤣
@@BrassCatcher by this it means i always awaiting for new video 😁😁😁😁
I know how you feel. Being 1st is the greatest feeling in the world.
idk why but it seems like these guy's try to hard and they are not funny.
Bring back Ian and extreme 4x4 already. I hate this show.
More of the same. Boring TV.