ฝัง
- เผยแพร่เมื่อ 24 ก.พ. 2023
- Checking out the Furitek Bettle Chassis for the Capra UTB18!
Furitek Bettle chassis available here
furitek.com/products/fur-2283
Furitek Brushless system found here
furitek.com/products/fur-2267
Don’t forget 2fmrc at checkout for discounts at most of your favorite shops!!
HELP SUPPORT the channel by clicking my affiliate links below and then shopping at no extra cost to you!
Thanks for any help!
AFFILIATE LINKS BELOW
Horizon Hobby affiliate link
bit.ly/3eXihxY
Amainhobbies affiliate link
bit.ly/3CurIyF
FairRc affiliate link here
shrsl.com/3qxuc
FMS Affiliate link here
www.fmshobby.com/jsVeIxtdZHBb...
Amazon affiliate link
amzn.to/3I4tQzI
RCAWD affiliate link here
rcawd.com/?ref=FaSRjm2T
Other DISCOUNT CODES BELOW
FMS discount code is 2fmrc
$10 discount is only applicable to the purchase of complete all vehicles and accessories, and can only be used when the amount is over $50
Injora Discount code is 2fmrc05 for 5% off
MofoRC discount code is 2fmrc
Fullsendrc discount code is 2fmrc
RcAWD discount code is 2fmrcawd5 for 5% off
Micro Komodo with mount for Trx4m here
furitek.com/products/fur-2259
Furitek stinger combo for TRX4M here
furitek.com/products/furitek-...
Furitek lizard ultimate here
furitek.com/search?q=lizard+u...
Order from FMS site and use 2FMRC discount code $10 off complete truck purchase here
www.fmshobby.com/i0Io4gJ_t9ISDY
Extended links for the fcx24 found here
Link kit available here
www.ebay.com/itm/334484497358...
Contact me at 2fastmattracing@gmail.com
Purchase PARTS for the Fcx24 or rtr and help support the channel here!
shrsl.com/3la45
FCX24 Portal Gears included in this set
shrsl.com/3la70
FCX24 at amainhobbies here!!!
bit.ly/3yoLwRL
Fcx24 on amazon here!
amzn.to/3nDSCfb
High clearance links used found here
amzn.to/3NfOJaj
RC4WD Stamped steel Wheels used found here
bit.ly/3ntbRbc
RC4WD Scramblers found here
bit.ly/3FT3GgA
Other upgrades found here
Injora brass wheel rings found here
amzn.to/3zVGWM1
Wheel hex extenders used found here
amzn.to/3Oh8FLy
Stock Scx24 driveshaft (long) used for rear
amzn.to/3ndGhOk
FMS FCX24 available here in yellow
amzn.to/39OSMwU
FMS FCX24 available here in blue
amzn.to/3HHAHgJ
FMS FCX24 available here in red
amzn.to/3Oyjvwd
TOOLS I USE FOUND HERE
T-handle wheel wrench I use here
bit.ly/3qst079
WORK MAT I USE FOUND HERE
amzn.to/39gcXUb
MIP .050 hex found here
bit.ly/3xOvi45
MY FAVORITE TIRES BELOW
Injora 64mm Hyrax
amzn.to/3fmOShr
Power Hobby Trail Warriors found here
www.powerhobby.com/powerhobby...
Rc4wd Scramblers
bit.ly/3FT3GgA
MY FAVORITE ELECTRONICS BELOW
My favorite SERVO for the price
amzn.to/3jTbpVg
Another great BUDGET servo here
www.amazon.com/dp/B0B88BX53Y/...
My favorite ESC found here
bit.ly/39jhrtc
My favorite BRUSHLESS motor here
bit.ly/3MIMEU3
~-~~-~~~-~~-~
Please watch: "Injora Lights for SCX6! Super Bright & CHEAP!"
• Injora Lights for SCX6...
~-~~-~~~-~~-~ - บันเทิง
![[TH] 2024 PMWC x EWC Main Tournament Day 3 | PUBG MOBILE WORLD CUP x ESPORTS WORLD CUP](http://i.ytimg.com/vi/3EM6gpHgLk4/mqdefault.jpg)
Love the love of the Capra! That Bettle is awesome and nicely priced.
Ohhh I like the carbon fiber!
I feel the same way when I see the titanium lol
Love the video! I'm building a custom utb18 from all aftermarket parts and using this carbon fiber bettle frame. I'm not a fan of stock servos or brushed motors and I wanted rear steer. So building one from scratch will end up being cheaper than buying the rtr utb18 and replacing everything but the front axle housing. This is a great size to throw in the jeep while hitting off road trails and playing with it when we stop and get out.
Heck yeah! Definitely a great size to take along anywhere. I’m kinda thinking this will be my larger truck that I take on vacations etc with me from now on. Keep me updated on your build!
Its growin on me! Cheers matt nice job
Nice review. I love the orange body on mine but might swap the chassis later. I just installed the Treal brass portal covers and overdrive portal gears on mine today. They went on easily but its raining here so I can't test it yet. Some heavier wheels really does help it crawl better.
Good job buddy great video
Hey Matt like what you're doing with the Utb18. Could you do a video on where you like your settings in the furitek app? What are your thoughts, how do you like your throttle curve, punch, low speed and so on?
Thanks!
I am not sold on this yet. I am hoping that it has potential to become a monster truck rtr especially with this Furitek stuff.
That thing is very very cool
I'm going to be doing another build and don't know what tire to go with in your opinion what your favorite tires and wheels of all time?
Killer spot! Same issues with servo.
What servo are you running?
@2FM RC I saw multiple reviews on the Zooskay 35Kg PRO. So i figured it would be more than enough for this little rig. It's actually pretty darn good. I can run it crawling. But when I tested with the quick left right left it definitely didn't like it.
@@hyperc5249 yeah those are solid servos. Kinda surprised it’s causing issues also. Mine was the same way on the bench. It was fine while steering slow but if you flick the steering it would shut down. It got worse as I was crawling.
That colorway is sometimes called "Oil Slick". love the price on this one! thanks for the vid matt
Yeah it definitely looks like an oil spot lol. I had never seen it offered on the chassis’s until Furitek asked me what color I wanted on the fcx24 chassis and I asked them if they could do an anodized titanium. Now it seems like a lot of people are offering it. I may have to pick it up for a custom build at some point!
@@2fmrc im definitely gonna pick one up, price to performance is good.
Do you think the Bettle chassis on a capra platform will fit in a mini comp class ?
I had a thought, would a WPL body fit on the chassis you were formerly using?
Can you do some videos with your scx24 c10s
I need to pick up another c10. I’ve modded all of mine into other trucks now lol
Just curious ,do you go crawling competitions and apply all these upgrades and see if they work?
There’s never really any comps in my area but I crawl with quite a few other people and usually pull any line that anyone else can pull with no probs. I’m not much on comps though honestly. Got burnt out on grown men crying when racing so I crawl to have fun & not listen to people cry about what class this truck should be in or if that tire should be allowed blah blah blah lol. I usually get performance and don’t worry about what comp class something should fit in because I really just don’t care. I just want it to run good!
@@2fmrc lol I thinking getting scx10 pro chassis what do you think? Is it worth $500? Or go cheaper on Rock Pirate chassis..
You order the new LGRP Trench Kings? Hoping the compound isnt like the Trail Kings lol.
Yeah I did. I also hear the grippers are a better compound than the ones I bought on release. I should’ve grabbed another set of those but didn’t.
@@2fmrc Yeup, heard that too. I was also hearing that the NL3 compound the grippers now come in was just too soft. Trench kings are supposed to be similar to swamp kings so hopefully the performance is too. I also prefer the look of the trench kings. Waiting for your thoughts and review! Keep up the solid work!
When do you suppose that body is going to be out for us peasants
All that money. N stock axial junk tires. gesus
Lol well to be fair I haven’t spent any money on this one yet. That’s why I wanted to make sure these upgrades made me like it enough to put some money into it. I really never drove it until the last wk or two. If I could get some companies to send over tires to test on it I’d be set 😆 The stock tires actually grip pretty good. They just need some foams!
$125 US for the titanium version here in Australia, dear as poison, but im still getting one !