Super Bettle! Very cool, indeed. Would love to build one! Can't decide between all new specific parts or a donor trx4m... I tend to replace most everything anyway. Hey, great vid, thanks.
Super Bettle!! I built up one of the ti Bettle chassis' and added some brass down low and 65mm pin comp tires and it will go almost anywhere I point it. Such a great rig!!
Furitek if you have any plastic head all in your truck you better switch it for you right now there's just so much low in for and then high speed I know in the fmx that it is insanely fast especially on 3s April do donut of on donut I'm sure if I didn't have the front in so weighted down that it would pop wheelies
That is a good video, thank you. Could you please give me Informations for the both Plastik Parts, which you mounted in front, for slashing about stones and the rear to high up the both upper links , thank you.
I have other trucks with plastic gears and furitek systems (and other even faster motors) and they are holding fine so far. Make sure your mesh is good and don’t force throttle when clearly stuck.
That's why my don't hold up because I forced throttle when stuck it's like Matt from 2fmrc says I want to go where I want to go LOL but yes I do believe plastic years can hold up because I got the plastic little ring inside of the FMS transmission everything else is metal only the shifting Fork bring his plastic also another note if anybody's having trouble with the FMS FCX 24 Power Wagon transmission not wanting to shift after installing steel gears in the transmission I have found out that it is not the gear set it is the wire that is on the servo then shift the gear for you if it's straightened out at all it needs to have like a slight 45 in each end cuz I ended up finding mine to a complete 90 and it wouldn't work no matter how much I adjusted the servo trim it still wouldn't catch both gears
Metal Gear sets are not that easy to be found right now there's a quite a few of them on eBay but they're not the low speed I was looking for the 80 3 1 found 40 3 1 I believe that is how it ended up being or something like that
I want to order one and just swap all the stock components but I've seen complaints about the stock ESC being a very tight fit and plugging the battery in can be a real pain. Idk, maybe de-casing it would help. That roof needs a hinge exactly for this reason. Edit : SUPER BETTLE!
I actually didn’t screw in the back 2 screws so that I can hinge it. The stock esc is pretty large and would probably do well to be decased. Edit: thanks for watching the whole video!!!!!
I think if we can put more tricked-out rides and people's hands and show him the things they can do it would be a lot more interesting the people will there be a lot more views on everybody's Channel
Can you thread the shock mounts to 2.5mm? That way you could use the stock shock bolts with no need for nuts (or is the chassis too hard to thread with the new anodizing)
it is not more a TRX4m, it is more like a buggy. Is there any chance to see some leds on the roof or in bumpers? This Stinger will be dope with some leds inside of the engine. As always - good vid, great job thx:)
What makes a TRX4M? The body? I would definitely like to get some lights on it or some sort of front bumper. We will see over time how it evolves. Huge thanks for watching!
Mmm more of a common screw they probably got billions of them that's why sure they use them on more than one I know they do because I have the same stuff on the FMS
Super Bettle! Great Vid!
Thanks a ton for watching. We are loving it.
Super Bettle! Very cool, indeed. Would love to build one! Can't decide between all new specific parts or a donor trx4m... I tend to replace most everything anyway. Hey, great vid, thanks.
If you know what you want, a donor is a waste. :)
Oh and thanks for watchin!!
Super Bettle
Thanks a ton for watching!!!!!
Thanks .definitely going to order one .
It’s awesome.
Thank you
You're welcome
Another great build Ken. Thanks for the tips, always learn from you.
Huge thanks for watchin!!
Super bettle 🙃
Thanks for the watch!!!!!!
Very cool
Indeed.
Super Bette Looks pretty awesome Yep we was here watching
Thanks for coming!!!
Super Bettle!! I built up one of the ti Bettle chassis' and added some brass down low and 65mm pin comp tires and it will go almost anywhere I point it. Such a great rig!!
Sounds great! I def need to add some down low weight.
Always a detailed build very helpful thanks
Huge thanks for watchin!!!
Furitek if you have any plastic head all in your truck you better switch it for you right now there's just so much low in for and then high speed I know in the fmx that it is insanely fast especially on 3s April do donut of on donut I'm sure if I didn't have the front in so weighted down that it would pop wheelies
That is a good video, thank you. Could you please give me Informations for the both Plastik Parts, which you mounted in front, for slashing about stones and the rear to high up the both upper links , thank you.
I’m sure I mentioned it in the video but those are 3flow9 rc parts.
Great video! I would like to see a comparison with and without the anti-squat link riser.
Super Bettle!
If we ever get time. Sooo many projects.
@@TheShopMiniRC I hear you. Nice to have too many projects in this hobby.
Can you try the horizontal servo mount on it
Once I get another one I definitely will.
I don't think there's no way in hell in that plastic transmission gears are going to hold up to that
I have other trucks with plastic gears and furitek systems (and other even faster motors) and they are holding fine so far. Make sure your mesh is good and don’t force throttle when clearly stuck.
That's why my don't hold up because I forced throttle when stuck it's like Matt from 2fmrc says I want to go where I want to go LOL but yes I do believe plastic years can hold up because I got the plastic little ring inside of the FMS transmission everything else is metal only the shifting Fork bring his plastic also another note if anybody's having trouble with the FMS FCX 24 Power Wagon transmission not wanting to shift after installing steel gears in the transmission I have found out that it is not the gear set it is the wire that is on the servo then shift the gear for you if it's straightened out at all it needs to have like a slight 45 in each end cuz I ended up finding mine to a complete 90 and it wouldn't work no matter how much I adjusted the servo trim it still wouldn't catch both gears
Metal Gear sets are not that easy to be found right now there's a quite a few of them on eBay but they're not the low speed I was looking for the 80 3 1 found 40 3 1 I believe that is how it ended up being or something like that
I want to order one and just swap all the stock components but I've seen complaints about the stock ESC being a very tight fit and plugging the battery in can be a real pain. Idk, maybe de-casing it would help. That roof needs a hinge exactly for this reason.
Edit : SUPER BETTLE!
I actually didn’t screw in the back 2 screws so that I can hinge it. The stock esc is pretty large and would probably do well to be decased.
Edit: thanks for watching the whole video!!!!!
I think if we can put more tricked-out rides and people's hands and show him the things they can do it would be a lot more interesting the people will there be a lot more views on everybody's Channel
I like to show people that they too can do upgrades and builds.
Can you thread the shock mounts to 2.5mm? That way you could use the stock shock bolts with no need for nuts (or is the chassis too hard to thread with the new anodizing)
You might be able to rethread them. I was tempted to try and just force the stock screws in, but decided against it.
it is not more a TRX4m, it is more like a buggy. Is there any chance to see some leds on the roof or in bumpers? This Stinger will be dope with some leds inside of the engine. As always - good vid, great job thx:)
What makes a TRX4M? The body? I would definitely like to get some lights on it or some sort of front bumper. We will see over time how it evolves.
Huge thanks for watching!
he says still has the blue and the purple and the .....its still a rainbow lol
lmao...
Mmm more of a common screw they probably got billions of them that's why sure they use them on more than one I know they do because I have the same stuff on the FMS
Likely.
You complain alot....
What am I complaining about? Lmao
Super Bettle
Thanks for watchin!