5V to 3.3V Arduino Voltage Converter AMS1117 Tested
ฝัง
- เผยแพร่เมื่อ 10 ก.พ. 2018
- .In this video you will see the module AMS1117 5V to 3.3V DC voltage converter is tested under different load.
Watch 5A 50V Converter with WiFi App Control WZ5005 : bit.ly/wz5005
download the manual for AMS1117 Voltage Regulator: www.advanced-monolithic.com/pd...
Electronic load used in this video:
• Test review of 150W 10...
My Arduino Course on Udemy: bit.ly/rj-udemy
Tutorial by Robojax.com
Get other projects code and learn Arduino
robojax.com/learn/arduino - วิทยาศาสตร์และเทคโนโลยี
![Yoshi Rinrada - 'มาทำไม' [Official MV]](http://i.ytimg.com/vi/r41xbfRLkLs/mqdefault.jpg)
thanks for this video, I have doubts about that circuit, but look promising, I buy several ones
Glad I could help
Yes, excellent testing. Very helpful. Thank you.
Glad it was helpful!
Excellent testing.....thank you!
You are welcome.
it may be 1amp on sporadic burts , not continually ...
Nice video, thanks :)
If you put vias under the back (ground) of the back of the AMS1117 to the back of the PCB and make a large ground plane on back of the PCB will help wick the heat away
Remember voltage regulators have to dissipate heat when they regulate voltage down...so you need a heatsink on the chip...or a heatsink of copper on the PCB
what do you use for load testing?
It is called 150W Electronic Load sold on eBay. I have a video on that th-cam.com/video/-kI7OtTHd18/w-d-xo.html
So it's not possible to step down 5V to 3.3V on the Arduino itself? I just want to build a device that will make a button do the opposite. Like splice a wire, install a button and have it do a digital write to LOW when it's pressed, and HIGH when it's not pressed. Thankfully it's a 3.3v line so maybe I could just power the Arduino with the existing line, then just do digital write from there.
Arduino has 3.3v output when you power it via USB
Can you tell me approximately, what the power consumption of it is?
I have tested all provided all the results. it is the efficiency. I have shown that.
Sir, how about efficiency at @100-200mA ?
does it work perfectly if i take output load of 600mA ? i mean for a longer period?
This is the best test I could offer. You should come to conclusion from the test result as there would be 100s of way to test and all could not be done in short video.
Not for longer period
Some people read datasheet before inserting two fingers into an outlet. It is 800mA IOut, not 1Amp !!!
cool video!!
Thank you.
esp07 max input is 500ma is AMS1117 suitable as its output is 1Amp
Hi, I believe I have shown the datasheet, mentioned the maximum current and tested it.
What if connected forward biased diode to drop 5 v to 3v
the forward bias voltage of diode is about 0.7V so to get 2V drop, you will need to put 3 of them an still it will not be exact it would be 2.1V drop. The voltage drop on diode is wasting energy as the current passes. not a good idea.
Ok tq
What if 3.3v zener diode used
can this handle 12v dc input for 3.3 v output ? how about 5 volt output for arduino?
Hi, it seems you missed reading the title of this video.
Is it better than LM7805?
7805 is getting up to 15V and converting 5V output. This module can only get 5V and output 3.3V. They are two different things.
@@robojax I want to know whether Transformer phasing out as most of the people are using AC-DC adapter, LM7805 and LM2596 types converter and why? Must reply!
Robojax these types of regulators are not good. The bigger the difference in input to output, the more heat it will generate. Look at the buck regulators, they are better and more efficient
If my power supply amps are higher than 1amp does it still produce 1 amp out?
Yes. Higher power at input never would be just excess and will not be used.
Max power disipation is 1.2w
Thats the reason why i mount heat sinks on theese devices 😅
very good idea to add heat sink.
Can you give me file PDF AMS1117 ?
here is the datasheet www.advanced-monolithic.com/pdf/ds1117.pdf
how much current does ams1117 ic consumes??
On page 3 of datasheet www.advanced-monolithic.com/pdf/ds1117.pdf it shown the Quiescent Current Typicaly 5ma and Maximum 11mA , Please subscribe. I appreciate it and helps my channel grow. Thank you
Read the specs... it has a max of 700ma.... why would you try over. It will just fail.
I have explained it. But when you buy it on eBay and AliExpress people put incorrect value in the title of the item so I am showing them that those values are incorrect.
The AMS1117 graveyards are full and using up all our landfill, stop doing this ! At 6:50 did you have a swig of helium soda :)
LOL. When why you visited this video?
@@robojax I liked your videos but dont like to see AMS1117's being tortured like this.
hahahah. thanks.