1990 Civic DX - Overheating Issues Fixed? Track Footage of the Jackson Supercharged D16
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- Parts I Use -
Stainless Brake Lines - amzn.to/3kuVqt5
Eastwood Replica Fender Roller - amzn.to/3kuVuZR
Skunk2 LCAs - jhpusa.com/sea...
Buddy Club Wheels - jhpusa.com/pro...
Headlight Ducts, Vented Gauge Pod and Radio Block off plate available here - www.efbmotorsp...
Cameras used in this video
My GoPro - amzn.to/2YQ3OGZ
My Mirrorless Camera - amzn.to/2HzzFFT
Send me stuff here!
Jon Widmer
PO Box 13594
El Paso, TX 79913
/ garagebuilthondas
Thanks for watching!
Disclaimer
"Due to factors beyond the control of Garage Built Hondas, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Built Hondas assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair videos. Due to factors beyond the control of Garage Built Hondas, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again, any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Built Hondas."
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll potentially receive a small commission at no cost to you. This will help support the channel and allows us to continue to make videos like this. Thank you for you support!
The supercharger whine sounds SO GOOD!
This car has come a long way!
Andrew is getting alot better. And dope to do mods with out breaking the bank. And finally get a damn bucket seat
You might call this car a POS but I love that little shit box!!!
That pro charger is insane bro!!💪🏼
Maybe if you did a little weight reduction, finish putting on all of the suspension parts. It could be a little monster in sheep’s clothing!!🔥🔥🔥💪🏼❤️🙏🏻💯
I love it!!
Thanks man!! I love it too, a lot actually. Probably why I keep tinkering with it and trying to make it better every time I touch it!
The teggy Type R looks great as a wagon.
When you see it you can't unsee it.
Lol
Jon, Sentinel 922 adhesive remover will dissolve plasti-dip and you can literally wipe it off with a rag. I just used this today on some wheels, in a cheap spray bottle to soak them down with it. Worked amazingly and had my wheels cleaned up in 30 minutes. They stock it at Home Depot. A good seat makes you realize how much you move around and how it makes the car feel a little sloppier.
Getting my internals right and machining the block. One of my favorite channels for informative inspiration. Appreciate all the posts man keep up the good work!
Glad to watch another video buddy learning from your build to my CRX thank you Watching always from California 🚗
Thanks Von!
Crazy , was about to txt you and see how everything’s going and the notification of a new video popped up haha
Nice, hanging in there man! What about you?
@@GarageBuiltHondas that’s good to hear man, same here. Videos kick ass bro. Keep up the good work !
Thanks man, always trying to stay busy. Think I'm going to try to get the crx transmission swapped for the Sept event and enjoy that car that day. We'll see! Lol
Looks like a blast! Hope yall keep getting quicker and quicker each event
We hope so too!
It ALWAYS starts out small on little projects with US car guys. Then it goes to full ham on. Jon you had me smiling. I remember this car was just kind of a side project I know you were just tinkering around with it a little. but now you’re getting all kind of new parts and putting on it . just like the rest of us . just can’t stop at one little thing.
Right. Once it ran right I couldn't help but want to make it run even better. Definitely a really fun car.
It’s just entertaining to see somebody else go through the Whole car addiction process. when you’re doing it yourself you don’t realize you’re doing it . it made my day nonetheless
Thanks man. I love trying to make them better than I found them. Now only if I had like 8 replicas of myself I'd be able to work on like 4-5 cars in one day and get s ton of work done. 😁
@@GarageBuiltHondas . Lol. Yessir! I feel the same way Buddy. Have a good rest of your weekend. ✌🏻
Likewise!
Wazzzzup lads...Kurd Kutter from Walmart, cleans surface rust, very well. For me it's heat n salt, you guys the heat...so light grease of all ball joints etc...especially for track, high heat right! It'll kill squeaks and add longevity...dude, subframe brace, big difference...have you painted before? keep turning that wrench...one love ❤️
Krud kutter
That’s some mighty fine driving there partner 🤠
The supercharger sounds amazing! Awesome track footage as well!
Hella yeah brother . keep it coming Boss 🤙🏼
So I've never been a Honda fan but I love this channel and I keep searching FB marketplace for CRXs/random hatch civics to build. Great driving dude! Definitely throw a seat in that car and it'll help you stay on throttle/breaks in and out of corners. Can't wait to see more. Also that supercharger sounds is soooo good. 🤙🤙
Really appreciate that comment. Keep looking, you can find a beater for like 1000 to 1500. This car was only 1k either the charger. I did add some of my own money but the build is still under 2k total.
The goo gone does work on the plasti dip best method i found was a good course rag and plastic razor blade or scraper, work smaller areas at a time and try to let it soak in but not dry out before you start scraping/scrubbing
👍
The supercharger whine sounds so good!
👍
If you have an EMUSA type of rear LCA, I guarantee the bushings are shot. Mine lasted about 3 months. I switched to Hardrace units and they are great so far.
I have an ebay set. After 2 full track days the bushings were still perfect looking. Removed the arms just the other day. I did get the Skunk2 in on the next video.
@@GarageBuiltHondas good to hear. The emusa bushings caused weird tracking issues with my car. When I removed them and saw how bad the bushings were it was no surprise.
I bet. The skunk2 should last for a bit once I get them on.
Been looking forward to the next video.
👍
Yo John! When you swap over to the Mini Cooper rotors, I highly suggest installing some spacers on the lug studs. The lug stud for the Mini are wider than the Hondas. Under hard braking and acceleration, I would hear the rotor snap forwards and backwards around the lug. I'll DM you this guy on IG where I bought mine from (you could probablymake them for cheaper). Installed them and had no issues since. I originally thought my ball joints were making that noise lol
I follow him already. 😁
Aletheia Motorsports. 👍
@@GarageBuiltHondas you nailed it!
I saw them a long time ago and just followed for future reference. My future plans always take forever to pan out. Lol
The buddy club wheels look super good!
👍
That front bumper seems to be very restrictive and possible cause for the overheating issues as well? Just my opinion. Love the channel! Wish I could someday have the garage and one or two quality Honda’s/Acuras like yours 🙏🤞
That's true, never though about that but it is kind of a small opening. 👍
loved the track footage bro
& something like evo hood vents would look pretty sweet & multiple vents so good cooling as well!
Definitely. I bought some new ones. They'll be on soon!
Jackson has come a long way, great to see it ripping. I noticed Chris was working on the Blue CRX, did he pick up another one?
I did to put in an engine then sell for profit, but he convinced me to see it to him. Lol
tire still rubs. 😂 great run btw, love the whining supercharger
👍
So glad the vents and radiator kept temps down. How did the brakes do? Did I miss you saying that?
Zero issues
You need a LIMITED SLIP DIFF, thats why its spinning one tire when you apply full thottle on exit. A big rear sway bar will help also if you dont already have one itl change the car in the corners!
Absolutely could help. And yup, actually having a sway bar in the rear would help. I don't have anything yet.
Maybe worth pointing a gopro at the front wheels to see if you're lifting a wheel, you might not have enough droop, helper springs could alleviate that if you're not running any preload, or maybe a thicker ARB or traction bar could help, or it could just be the tyres as you say but the camera might give you the answer before you start throwing parts at it.
Definitely!
Gbh= Great Britain hardcore look em up great band!
👍
About the PLASTYDIP, I used a power washer with a 20° tip and shot at an angle to remove it. I hope that helps👌
Thanks for the tip!
I forgot to mention, I also used "dip disolver" to soften the plastydip before I sprayed it off. Goo-gone works too. Good luck👌
Wheels look good! Good video...
👍
Send that jrsc manifold to lht performance to have a intercooler install
👍
Epic!
I left my heat shield off one time. My otherwise reliable ef sedan began to overheat after a couple stop lights. The exhaust really roasts the radiator without it.
Especially those cast iron ones. 👍
@@GarageBuiltHondas That makes even more sense. Thanks for all the helpful vids keeping her alive.
I think that they make a remover for it.
If you wash i the engine bay it will help it cool down and keep it cooler in engine temp wise
True that
@@GarageBuiltHondas also put hood spacers they help force the air out of the engine bay 11 bucks on eBay
I don't like the look of hood risers. They look terrible to me. Temps are under control now, I prefer the vents over a riser.
Not sure if you've ever read up on hood risers, but they actually reduce the efficiency of the radiator. It's a proven fact. Check it out. 👍
@@GarageBuiltHondas didnt know that it helped out my old mk2 golf in the summer time
Yes. When they were super popular like 10 years ago I started reading up on it. You'll notice how you never see hood risers on a lot of time attack cars where they are pretty serious racers. I judt never really liked the look. I tried it on a DA I had but it killed it for me.
You could make a giant "h" emblem out of the new vent.
some lacquer thinner on a rag will make short work of the plastidip
👍
I’m a huge fan love the videos ……soooooo what kind of rims are those on the car
Enkei CPS-II and Buddy Club SF Challenge.
My wheels!!!
👍
where u get those headlights at?
th-cam.com/video/0y6jzVfYM-E/w-d-xo.html
Have you ever considered a spal fan I have a 12" with a have size 3 core aluminum radiator on my turbo EF and my engine stays cool even living in the desert
👍 I actually bought one not too long ago locally brand new. I'll install that soon as well.
@@GarageBuiltHondas Nice spal fans work amazing bro as long as you run the relay kit
Yes, bought that also. Probably will be more than enough now as it didn't even flinch with the new radiation setup and Yonaka supplied fan.
@@GarageBuiltHondas Yup definitely bro
@@GarageBuiltHondas th-cam.com/video/cVuiTslzwa8/w-d-xo.html
I can’t seem to find the JacksonRacing Supercharger anywhere. Does the company still manufacture the d16 supercharger
Unfortunately no. These have been discontinued for years.
Am I seeing images hinting to a upgrade/change to your TH-cam logo ? 🤨
GBH 🤷🏼♂️
No. Just using a random stencil and plastidip to mess with the car. I already pulled it off. Lol
Hey Jon, I have an innovative traction bar and was wondering if you experience any clunks when turning in your parking or something, if so do you know any proper way to mitigate the clunk?
Which bar? They make 2
@@GarageBuiltHondas version 1, non updated version. I think you made a video on the updated version though, but the connection at the LCAs where it clunks is the same!
You may not be tightening them enough. I've had zero issues on my track car and that car is pushed way harder than a daily driver and has been on there for over 500 miles of track usage plus another 1000 on highway use back and forth to the track.
@@GarageBuiltHondas I see, thats what I thought too a while back & added red thread lock & just sent it with a torque gun but the noise persists. I'm thinking I'll undo everything & jack up the suspension to recreate load on the arm & see if that fixes it. Thank you for the reply man!👍
Try to remove the power coat or paint where the volts touch and where it touches on the bottom side. That might tbe creating the loss of torque.
amazing how big your garage is but you filled it up and need to work on cars outside. maybe need to build another garage for non show cars
Lol. They always say the more room you have the more space you'll fill. When I built the garage I owned 4 cars. Unfortunately deals came up (ITR & GSR) as well as a handful of beaters and here I am again.
If I save up and buy 2 lifts, I'll be ok.
where are you located ? can't find anybody who works on Ef's
El Paso, TX
I just rebuilt my brakes on the si but since I have drums I replaced the wheel cylinders but the auto zone and oreiley ones have such a cheap bleeder valve it literally broke inside 3 times.
Gross
How you like the Jackson supercharger! Is it a difference, or can you do with or without it
Compared to a stock sohc, it's a huge difference.
@@GarageBuiltHondas I want one for a B18 but since it’s no longer available whoever has wants a grip for it
Yup
Nooooo the poor track car!
Lol, right!
What is that hood?
Stock.
Don't put those vents,that don't look nice on it !
Sound wise she sucks!!!!! Where is that HONDA sound ??? Other than that I like her alooot
Honda sound is overrated. 😂
Where’d you get the side mirrors from?
eBay. Made for a crx. I talked about it in the video.