ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Glass Bedding with Acraglas Gel
ฝัง
- เผยแพร่เมื่อ 15 ส.ค. 2021
- Glass Bedding a Ruger 77 Mark II with Brownells Acraglas Gel.
Acraglas Gel:
www.avantlink....
Acra-Release:
www.avantlink....
For general shopping please use the following link to help out the channel:
www.avantlink....
#brownells #acraglasgel #glassbedding #gunsmithing #accurizing #bureauofpropagands #ruger77
I've been using Acraglas Gel for decades and the only thing I didn't like about it was it's messy to work with and clean up. I finally purchased some of Brownells Acraglas solvent and that solved all the cleanup issues.
Great work!! Actually need to ensure that the clearance is the thickness of 5 one dollar bills. Having barely enough clearance for a single dollar bill is not enough. Maybe you can get away with that on a Bull barrel, but on a Sporter barrel you need much more clearance.
I buy the big syringes to apply it with. Makes it easier to apply. Can't get it now. Brownells is out of stock and lady told me they don't know when it will be available again.
any syringe work, i guess. There is plenty to pick between. Buy cheap, drill or cutt the hole if you need a bigger "hole" in the syringe. Buy cheap, use once.
I use marinade needles for similar things. That should work well for this. Just cut the point off so it comes out the tip & not the sides
Great video. Have you ever bedded a Sauer 100 action? It would be very interesting to see. It has a unique stock to action fit.
I have not. It shouldn’t need bedded with the aluminum bedding block they have for the recoil lug area
@@shreckenguns6133 That's what I thought also. Never hurts to get a second opinion. Thank You
Did you use enough compound? Wow! If it works that’s all that matters
I’ve found over the years too much is a better problem to have than not enough and having to redo it due to voids in the bedding. If you pull your barreled action early like I suggest, cleanup is as simple as trimming with a razor blade. Thanks for watching.
So I bedded a mosin yesterday and got up this morning to take it out of the stock and found that I got some acraglas into the tang screw area and now I can't get the screw out. Thought I had cleaned it up really well, but apparently not. Any suggestions on how to get the screw out?