Pulled my transmission apart and just like you said both gears were in backwards. greased them installed them like you said and NO more click. thanks much
Thank you for posting this! For anyone who doesn't know, anytime a transmission or portal gear sits on a pin inserted through a shaft, the pin seat in gear is only rounded on one side of the gear. If u look closely on ALL transmission or portal gears the gear "SHOULD" only go on one way but it can be installed either way because it appears as if it doesn't matter which side the pin sit's on, that's why we're seeing/hearing random videos of clicking SCX10III Jeeps & SCX10II UMG10's with various degrees of clicking depending how many transmission or portal gears are sitting on pins incorrectly! The transmission or portal gear shaft pin seats are only rounded on one side of every gear that sits on a pin inserted through a shaft, if it's the wrong side it's like adding 2 or 3 shims & will create binding &/or make gears hit covers causing the clicking. Some have just been lucky cuz it's a 50/50 chance of getting each gear seated on their pins correctly! Axial should make this clear in the instructions, luckily I saw a few other videos before I built my SCX10III Jeep. Now I need to go tear apart my UMG10 transmission cuz I didn't know this when I built that & even following the "revision" & using proper revised gear case in the UMG10 manual, it still was clicking & felt bound up.
Good job, thank you. I’m still waiting for mine to arrive and was worried, after seeing running videos with that constant clicking, that I would be disappointed with my purchase. Thank you again, I’ll keep an eye open for this during the build.
Nice job. It should have been described in the manual as you mentioned. You should contact axial with your finding so they can amend the instructions manuals going forward.
RC Life is treating you well my friend. Starting to think it has become your full time job and you moved away from Gumi. Always a pleasure to watch and to remember trailing together when you had not yet become a celebrity.
Just curious i bought a RTR SCX10.3 and its making that clicking noise as well do you think the factory could have put them in backwards as well. Any suggestions would be great
I have the axial SCX III gladiator on my second run I'm hearing a faint clicking noise but sounds like it's coming back right rear very faint clicking and when let off throttle it sounds almost like a vibration rattle ,can you help maybe or point me in right direction it could be nothi g but I'm paranoid.thanks so much
The 3 dislikes on a video sharing knowledge either come from mentally instable individuals or ex-Axial employees just fired due to their omission in the manual... Any other suggestions?
Mine didn't click until after about 5 hours of use, so I pulled the transmission out and flipped those gears to properly seat them, but the transmission still clicks! I have now pulled the transmission out about 5 times and rebuilt it and cant get the click to go away. I have verified its coming from the transmission and not the portals. No parts or plastic appear to be worn, so I am dumbfounded on what else could cause this clicking. Its very annoying. Any other ideas?
Hi friend. Have you tried the work in my video? I haven't gotten rid of the clicking sound, but I have reduced it a lot. It is hoped that this will be solved by the gear direction and grease injection. Thank you!
a year later and i got the kit it was still clicking it now says in the book about what side to use i just had a a loose bolt was makeing it click now its not
RC Review does a comparison on the TRX4 Defender and the scx 10 lll, then another on the TRX4 Sport and the SCX10 lll. Recommend watching both. The defender and the SCX10 are pretty much equal, but the sport outperforms it in many ways. Really there isn't very much of a difference, but you might see something that is a deciding factor in those comparison videos.
This doesn’t fix the click. I made sure every single gear was correct. It remains within the trans not the portals. I even flipped the portal gears around wrong and they don’t click either way so I don’t get it
@@KisunsRCLife my problem is solved 😁 I had the same problem in two of the portals. Now I'm realy happy. No more ticking. Thanks for the help mate. You did a great job to find it out.
Personally, I would think that would be obvious to people. It's like putting a square peg in a round hole, but in this case the other way around. I guess if you just want to get it together, you aren't looking for things like that.
Explains why I don't have the clicking sound. Haha! Great job Kisun!
Is this because you received an RTR?
Joey duncan no, because I built it properly the first time. 😉
Scale Builder's Guild lol
@@scalebuildersguild You're the Scale Builders Chief!
Thank you!
Guy with the most beautiful videos is also the most mechanically inclined -- well done!!!
I know your video is a year old but I just picked up my 10.3 kit today, thanks to you I'll be paying attention for this....cheers!
Pulled my transmission apart and just like you said both gears were in backwards. greased them installed them like you said and NO more click. thanks much
Great job diagnosing & explaining what the manual should have mentioned. Thanks!
Thank you for posting this!
For anyone who doesn't know, anytime a transmission or portal gear sits on a pin inserted through a shaft, the pin seat in gear is only rounded on one side of the gear. If u look closely on ALL transmission or portal gears the gear "SHOULD" only go on one way but it can be installed either way because it appears as if it doesn't matter which side the pin sit's on, that's why we're seeing/hearing random videos of clicking SCX10III Jeeps & SCX10II UMG10's with various degrees of clicking depending how many transmission or portal gears are sitting on pins incorrectly!
The transmission or portal gear shaft pin seats are only rounded on one side of every gear that sits on a pin inserted through a shaft, if it's the wrong side it's like adding 2 or 3 shims & will create binding &/or make gears hit covers causing the clicking. Some have just been lucky cuz it's a 50/50 chance of getting each gear seated on their pins correctly!
Axial should make this clear in the instructions, luckily I saw a few other videos before I built my SCX10III Jeep. Now I need to go tear apart my UMG10 transmission cuz I didn't know this when I built that & even following the "revision" & using proper revised gear case in the UMG10 manual, it still was clicking & felt bound up.
Nice!! Thank you so much for taking the time to share this! Love your videos. 👍✌️
You are my hero!! Been losing my mind over this sound! ❤️❤️❤️ Time to bust open the trans... AGAIN!
Bravo. My friend.you are very smart. I will remember that when i get get mine.
Horzion hobby should be paying u some money!! Lol. Nicely done. This sound was holding me back on this kit.
Good job, thanks. I didn't build mine .I have been watching all the build videos, marking my manual with all the tips. Thank you very much.
Good job, thank you. I’m still waiting for mine to arrive and was worried, after seeing running videos with that constant clicking, that I would be disappointed with my purchase. Thank you again, I’ll keep an eye open for this during the build.
Thanks! I can now feel more at peace about ordering this kit soon...
Nice job. It should have been described in the manual as you mentioned. You should contact axial with your finding so they can amend the instructions manuals going forward.
Oh my god!!!! You figured it out!!! Good job man!!!
I shared the video to a couple Facebook groups. Huge help. Thank you
i respect you so much you come out with the issue i have commented on every video and nobody would address this because they give them the truck.
Your videos never failed!!! You're the doctor man!!! Awesome!!! 👍🏼👍🏼👍🏼🤙🏼🤙🏼🤙🏼
Sir ! You Rock ! Awesome Trouble shooting . just Awesome .
I just took mine out yesterday, and was wondering why it was clicking... tha is man! 🤙
I’ve already been sharing this with others about your channel
And thank you cause when I build mine I will now know the correct orientation of the gear
RC Life is treating you well my friend. Starting to think it has become your full time job and you moved away from Gumi. Always a pleasure to watch and to remember trailing together when you had not yet become a celebrity.
Amazing! Thank you! Great job Kisun!
This was a huge help bro.
Kisun you the man. I dont have one but I was wondering what was making that noise. Good job
Nice diag Kisun! Great job.
Much better fix than the gluing the gear to the shaft fix, "take a look". I must have screwed up and accidentally did it right, no click here.
Bro you are awesome I have been stressing on the amount of money I've spent ...thank you sir subscribed
Nice work...
Nice find, and thanks for sharing.
This is awesome and I can’t wait to do it on mine. That clicking noise bothers me a lol. Thanks for the info...
Great video
Awesome!
Great job of troubleshooting, thanks much
Very well explained. Thank you!
Thanks for share
Great job! Thank you for sharing.
great job,why don't they think about removing the noise when they try,congratulation kisun 👍👍
Thank you so much!!!
💪
I'm happy if it helps you too
Thanks. Luckily I don't have to take mine apart to fix because it is still on back order. I will pay attention when I build the transmission.
AWESOME! Great info! Thank you!
Thank you!
Spotted 👍👍👍
good job Kisun.
Just curious i bought a RTR SCX10.3 and its making that clicking noise as well do you think the factory could have put them in backwards as well. Any suggestions would be great
I dont get it, pulled mine apart. But couldnt find the square part of the gear, all were rounded? Mine is a rtr🤷♂️
Amazing
I can now build with utmost confidence
Fantastic job !!
Nice !
Great solution !
good job, two thumbs up!
Muchas gracias ,un saludo
Great job!!!
I have the axial SCX III gladiator on my second run I'm hearing a faint clicking noise but sounds like it's coming back right rear very faint clicking and when let off throttle it sounds almost like a vibration rattle ,can you help maybe or point me in right direction it could be nothi g but I'm paranoid.thanks so much
nice job guys !!!
Great video, way to find the problem. So when I get my SCX10 3 it won't click.
Thank you problem solved
the best!
THANK YOU!
The 3 dislikes on a video sharing knowledge either come from mentally instable individuals or ex-Axial employees just fired due to their omission in the manual... Any other suggestions?
Thanks bro :)
Or people who have to pull their transmission apart again. Lol
Thank you
Nice one 😉
Mine didn't click until after about 5 hours of use, so I pulled the transmission out and flipped those gears to properly seat them, but the transmission still clicks! I have now pulled the transmission out about 5 times and rebuilt it and cant get the click to go away. I have verified its coming from the transmission and not the portals. No parts or plastic appear to be worn, so I am dumbfounded on what else could cause this clicking. Its very annoying. Any other ideas?
Hi friend. Have you tried the work in my video? I haven't gotten rid of the clicking sound, but I have reduced it a lot. It is hoped that this will be solved by the gear direction and grease injection. Thank you!
Cool
id call Horizon Hobby and let them know what you have found. good to know i plan on geting this kit
a year later and i got the kit it was still clicking it now says in the book about what side to use i just had a a loose bolt was makeing it click now its not
What kind of grease did you use or can you use?
It is ordinary Greece.
Are this any good or should I spend the extra$ on the trx4.thanks
RC Review does a comparison on the TRX4 Defender and the scx 10 lll, then another on the TRX4 Sport and the SCX10 lll. Recommend watching both. The defender and the SCX10 are pretty much equal, but the sport outperforms it in many ways. Really there isn't very much of a difference, but you might see something that is a deciding factor in those comparison videos.
wow!!!
but I have the RTR and mine click all the time
So this probably won't happen in a rtr kit correct?
I don't know about the RTR Kit.
This doesn’t fix the click. I made sure every single gear was correct. It remains within the trans not the portals. I even flipped the portal gears around wrong and they don’t click either way so I don’t get it
This car i see it so lovely and want play
Hi kisun, I just wanna ask if it's the same performance when u trouble shoot it or not? Thanks
Of course it is the same performance. The smaller the noise, the better the rotation feel of the transmission.
Thank so much keepsafe,Godbless
I followed the pictures and mines quiet! 3s PullerPro and that tube of grease!
My problem is that I have the ticking but my gears are in the right direction as u said. What else can it be?
Check the direction of the two gears once more and grease the grooves and pins of the gears.
@@KisunsRCLife my problem is solved 😁
I had the same problem in two of the portals. Now I'm realy happy. No more ticking. Thanks for the help mate.
You did a great job to find it out.
I am glad you solved it too. Congratulations. Thanks
@@KisunsRCLife thanks a lot
Personally, I would think that would be obvious to people. It's like putting a square peg in a round hole, but in this case the other way around. I guess if you just want to get it together, you aren't looking for things like that.
I was hesitant about buying this crawler due to the noise. Well it looks like I'm ordering another crawler.
owl ! but where are they parts ? : )
Please check the manual.
Complimenti molto bravo, certo che le istruzioni fanno veramente schifo
My Trx4 is making the same noise 🤢😠
똑같구만..손으로 살잡았나 ㅋㅋ