13" Inch 2020 MacBook Pro A2289 Disassembly Liquid Damage Logicboard Motherboard Removal Repair
ฝัง
- เผยแพร่เมื่อ 2 ต.ค. 2024
- Disassembly Repair Fix Tutorial Teardown Guide If my videos helped you save money, please consider helping me continue to make these videos by sending me a little appreciation, even $1 would be greatly appreciated. Thanks! :)
Venmo:
"@BinhVu" Last 4 Digits if it Asks Are 6734
Zelle or PayPal (friends and family from a bank account so they don't charge any fees):
itsbinhrepaired@gmail.com
Patreon:
/ binhrepaired
Feel free to mail me your old electronics or parts you replaced during an upgrade.
Mail:
It's Binh Repaired
1288 N Hillview Dr.
Milpitas, CA 95035
Tesla referral link: www.tesla.com/... - แนวปฏิบัติและการใช้ชีวิต
![[ TEASER ] เงาะป่า - วงL.กฮ. | TMG RECORD](http://i.ytimg.com/vi/M4ObdFfcPww/mqdefault.jpg)
Funnily enough, I removed my motherboard for the same model in order to clean it due to a very similar, bad water accident, though I had the idea before to dry/clean the parts before rebooting. This video helped a lot with the removal! You explain things really clearly and make it simple, and are generally very pleasant to follow along with.
I was wondering, what do you actually do with a Macbook like this?
My screen is the only thing that I know is undamaged, but otherwise, after cleaning, it's too scuffed to even power on. I only know the display works because it briefly booted before bricking for good, although everything was cleaned and dried.
Should I give it to some refurbisher to salvage parts? Or how would you go about diagnosing what parts are malfunctioning in a Macbook this damaged by water. Is it even worth replacing parts to attempt to fix it?
Additionally: Should it work within minutes of plugging in normally, when the battery is completely drained?
Usually it needs some charge, but you can try without the battery connected.
21:20 "can you share the name of the screwdriver for that hex screw? or the link to buy them
Thank you
This set works well amzn.to/3e4c4At
i know this might be a stupid question BUT, how do you ground yourself in order not to damage it?
Got my leg on a metal desk. It's not absolutely necessary, but if you live somewhere or weather produces a lot of traffic, then you might want to.
I have a macbook 2020 with possible logic board water damage.. i did not have anything backed up to icloud. Apple said it will be impossible to recover data. Is that true ? Isnt there anyway I can recover my data
@@malihaa9948 300dollardatarecovery.com might be able to help you with it.
Hi! I asked about the set to buy for screwdrivers a year ago. I’m back! I finally got the motherboard out and I only see one green spot on the BACK of the motherboard - 1633 54E. I can’t read schematics so I don’t know what it does :(. Do you have any idea another reason my screen is flickering with green lights, other than water damage to the MOTHERBOARD?
I would greatly appreciate if you could help - it’s been 2 years since the problem came and I just really want to fix it 😢❤
Does the issue appear on an external monitor?
@@ItsBinhRepaired No. The green vertical bars only appear on the macbook display. Also, thank you so much for choosing to help me out!
Do you know what the problem is?
@@makingmusicandproduction bad screen
Please where’s the Touch Bar flex located?
Top right I think
Thanks for the video very helpful, I have the same problem I turned it off quickly and cleaned it, after I turned it on and worked fine 40 or 50s, but the screen turned of and still working fine I saw all desktop under black screen I can navigate and click into folder and other stuff, I turned it off 3 or 4 hours still the same problem worked fine 1 min or so and the screen turned black like the light of. Have you any solution thanks
Not sure :( try an external monitor.
@@ItsBinhRepaired Thanks I will try
Any luck?
Doing this repair making me feel like king of the world!!
After removing all the corrosion and plugging back in it didn't turn on at all :(
:( how did you dry it out?
@@ItsBinhRepaired I got pretty impatient but I set the logic board on top of a HEPA filter fan for like 30 minutes. I Venmo u
@@Alex-rb5fs D: I don't think that's long enough unless you used like 91% Isopropyl alcohol to dry up everything. The board sounds like it's fried, unless you haven't plugged it in yet. It won't turn back on until it's plugged in after reassembly.
Thanks for the support!
What tool is used to remove the screw on the top left of the laptop that is screwed to the base (looks like it needs a very small socket to remove it). If you have the tool I would like to buy one. Thank you.
@@rogervalencia7790 this will have what you need amzn.to/4cRmHQ8
Much much appreciated very helpful video!
Glad it helped. If you haven't already, please like and subscribe so others can find my videos and possibly consider watching a few others to get the algorithm to recommend my channel. Thanks!
Hi, do you have a good link to an Amazon screwdriver for the hex 3.0 bolt that was the last screw you needed
This set is great amzn.to/3RWnuFu not sure about getting just one of the bits though.
Great video! I noticed you skipped the part where you cleaned the MB with hot water. Do you show this process in another video?
I don't. I just run warm tap water over the board and scrub it with a toothbrush. If you don't have a powerful air blower to dry it, I don't recommend it. You need to dry it well, then clean it again with isopropyl alcohol to make sure there's no water left.
@@ItsBinhRepaired Thanks. I actually managed to remove all a the corrosion with the toothbrush…No visible corrosion/short c anywhere on the board now…But it still won’t power on…
The only connectors that look damaged is the two in the top right corner which are slightly burned (power b & touchbar?) Do you think it’s likely that it will run if I replace the power button connector?
@@oscar1616627OscW wouldn't know without seeing it
@@ItsBinhRepaired I could send you a pic if you have time for a look. Otherwise, just in theory: The computer would show no sign of life if just the power button connection were failing, right?
I unclipped both sides and no matter how hard I pull and do it the same way as you that top corner will not budge and I can’t pull it out
@@GlaxisGalaxyYT did you also push down with your finger on the top part?
@@ItsBinhRepaired yeah I was holding the side and pushing down hard on the top like in the video but didn’t go down at all I tried other ways but that top part won’t budge
@@GlaxisGalaxyYT ask for some help to pull it down
@@ItsBinhRepaired I think mine is just tighter or smth at the top of that part inside of it because I got someone to help but they couldn’t open it so I’m just gonna keep looking for ways to open it
@@GlaxisGalaxyYT pull harder.
I'm not saying you are doing it the wrong way. But, warm water for cleaning the board is not recommended. Water is conductive and even you take-off the battery contact or there is no dc to power up the board, it may have still electrically charge components. We advise to use industrial alcohol, aside from non-conductive in nature it has more power in cleaning corrosions.
Also, you saying "it is not the water that made the component shorted" (it is the flow of electricity that does it). It is in fact, the water that made the components defective. Without this water going thru the mother board, you wont have this water damaged scenario.
Nope, just the electricity. Also, try cleaning syrup with alcohol. Try dissolving sugar into alcohol.
I have a 2020 macbook pro with 512gb ssd PCIe M.2 2230...... knowing it is newer model apparently it is impossible to upgrade or even replace the ssd. How true is this? I really want to upgrade my internal storage so bad
You can't do anything with it.
my macbook pro (2020) touch bar stopped working got it checked apple store said its water damage mac was woking fine. But 1.5 years later it started to turn on and off automatically and then wont turn on, I got it checked and they said its water damage it was the same water damage from before as after that I started being cautious about water near my mac then I tried cleaning it after watching your video but after assembling it the mac wont turn on or show any sign did I damaged the motherboard or what?
Sounds like it's dead
Hello, thank you for sharing this video.
I have same laptop vith same problem. It was on apple service and they clean it and they told me that keyboar and touch bar are dead, but other works well.
but anyway laptop cant start, when i klick on power button, then fan start for 2 second and then turn off.
i dont think so that keyboard is dead, but touch bar can be, because i dont feel any click.
what do you think that can be? should i try to clean it again and check all power if he get it well?
thank you for your answer.
br
If it powers up and then back off, it's likely the motherboard unless the power button is just stuck in the pressed position from liquid or something.
Hi, I'm experiencing the same issue. When I press the power button, the Apple logo appears for 2 seconds and then the device turns itself off. Can you please provide a solution? Thanks.
I just bought new bateries and will arrive in a few days. If that will slove problem i will writte here :)
@@Fuad895 thanks
@@Fuad895 hi, I tried without battery and with battery but no result
hi, at 34:13 is there a way to get that little black bit of tape to stick back down?
i ask solely because i’m in a tough position with my 5 month old mbp, wont turn on, couldn’t avail of warranty in ireland as i moved to vietnam (€280 postage each way). So i opened the mac myself to check battery, but now i can get my mac back to ireland with a friend to avail of warranty. The only thing is that little black bit of tape over the battery (02:45) has lost it’s adhesiveness.
I’m worried they will know i opened it to check and cancel my warranty after all this effort.
Have you any tips?
Thanks!
The tape isn't important
I caused liquid damage to my macbook a few months ago. Immediately took it to a computer repair store for them to dry it out and help. They said a board was fried and weren’t willing to do any repairs. You can see just a very small portion burned. It never turned back on. I decided last night to try and charge it to see what would happen. I noticed that the computer actually got hot, so it is taking power. I know it has screen damage as well, in the bottom left corner. Should I bother replacing the logic board for $400+ and hope it works or just invest in a new macbook?
Screen is also damaged? New logicboard won't fix that.
Hi, thanks for the useful videos, it helped me swapped mobo. Do you know if this model A2289 is the same as A2338? I'm planning on swapping the LCD screen and don't want to run into cable incompatibility. Thanks!
You'll have to check with the seller
Wow, I am surprised that the 13 Pro also has just two antennas as the Air. Not sure if the 13" Intel also has just two antennas as well.
I got lots of videos of all of them I think.
How long does it have to dry for
Did you clean it?
@@ItsBinhRepaired sorry I meant before taking apart and working on it. I have just a bit of corrosion near the power cable area. I made the mistake of turning it on. The display wouldn't turn on and the keyboard was flickering. I just see a little corrosion near the upper right circuits though. I spilled water on it last night, just splashed on the top of the laptop while it was closed, but I didn't even realize that it was broken until today when I tried to turn it on. I plugged it in too, 😬
@@Alex-rb5fs don't wait. Take it apart and clean asap.
crash after clik install os
restart and resrtart
Sounds like faulty motherboard
@@ItsBinhRepaired solution boot from macbook sir?dfu mode
@@jailbreak7750 that won't fix the motherboard
@@ItsBinhRepaired okay thnk y
@@jailbreak7750 no problem
Why there's a fan when there's not any ventilation provided?
There is. It blows out the back.
12:21 what is the size of that screw? I can’t seem to find it in my tools. I tried hex 0.9 and 1.3, but one was too small and the other too big. is there a scew in between 0.9 and 1.3?
I mention it in the video T5 get this amzn.to/3KnQT8G
@@ItsBinhRepaired oh I was confusing it with other scews. these ones go over the nut instead of going inside. looks like I have to go shopping. alright, thanks a lot. appreciate your videos. they are the reason why I am able to take apart my laptop
@@cabidinibrahim927 glad it's helping. If you haven't already, please like and subscribe so others can find my videos. Thanks!
@@ItsBinhRepaired Liked and Subscribed. Thanks again :)
Thanks :)
Great video
Glad it helped. If you haven't already, please like and subscribe so others can find my videos. Thanks!
Hi, how do you clean the board, I heard you saying with warm water?
You'll need to have a good air blower if you do that to make sure it's completely dry afterwards
Thank you, i do have good pc electric blower, do you recon this way is better than 99% alcohol spray?
@@allaboutec I use the alcohol afterwards to dry it.
Well, this is not M1 Macbook Pro 13". This is Intel Based Macbook Pro 13"
Oops
just spilled tea on my macbook what do i do can i take it apart and brush out the liquid with isopropyl alcohol and let it dry out?
If you're lucky, that might fix it.
@@ItsBinhRepaired ive got the back off disconnected the battery and cleaned the visible liquid, but i dont want to take it apart any further. What would be the best way to dry out the other side of the motherboard without taking it apart anymore? thanks
Not really a good way to do that. Dunk in a bath of rubbing alcohol lol
@@ItsBinhRepaired i could do that
Hahaha I was joking. It would somewhat work, but it'll also dissolve adhesives and stuff.
I don't have all the screwdrivers I need for this. What tools do I need? I'm gonna go to best buy now
I don't think best buy will carry what you need amzn.to/3SLIPRb
@@ItsBinhRepaired they have that! If there is corrosion and stuff do I need anything else?
Rubbing alcohol, paper towels,a toothbrush, vinegar helps remove corrosion as well. An air blower to dry it better, but not those cans.
@@ItsBinhRepaired this is so fun
Were you able to fix it?
where is the hard drive?
Not removable.
but your laptop didn't turn on
Yeah, the motherboard was killed from the liquid spill.
@@ItsBinhRepaired is it best to replace it by buying a brand new computer? Or did u replace the motherboard?
@@LeahNicoleTarot depends what you're willing to spend
@@ItsBinhRepaired well I’m trying to avoid paying 3 grand for my MacBook 16 inch pro 2020 .. I want to replace my motherboard and other components like my fans but if I have too I will buy a brand new one and just transfer the my stuff over to my computer the new one
: (
Too bad you was scratching the hell out the shell on the table
It wasn't scratched at all. Lol