Melted wiring like you see in this disconnect is usually caused by high resistance, rather than a short circuit. Reason being is that wires are designed to take the max current of the circuit breaker without overheating, ever. The only way something will get melted is if the current carrying capability of the wiring is limited, in this case, by a loose screw. There is always a slim chance that the breaker is welded closed AND there was a short circuit, so it's still necessary to check for a short in the capacitor, the fan and compressor motors, just as you see in this video.
@@Corey-dy2cq yeah.. I worked with a gal, she was the daughter of a Merchant sea man. She's got it, Hard working life long, up early. I appreciated her 'irreverence'. She was also a good character too though.
About 7 years ago one of my disconnects (it was a switch not a pull out) melted and must have caught on fire all charred around it. Lucky the house didnt burn down. . It popped the breaker. Luckily, I was able to pick up another one locally and just swap it out. Reset the breaker. And it's been fine for the last six years. No idea why it happened, but now, after watching your video. It must have been loose connections in there from the prior homeowner.
Melted disconnect happened on my condo unit. They used those cheap builder disconnect switches and saved 20 cents apparently and the wire was loose causing the pullout plastic to melt.
Man, these business owners let that unit go to hell then call you in to fix everything on it, i guess they have never heard of preventive maintenance 🤦🤦
hi steve always, I watch your video. It’s helpful a lot. i just got my diploma in hvac 2 years ago please can you help me with the low voltage wiring for bosh ids heat pump with heat strip i use t4 Honeywell thermostat thank you
I’m having trouble with my central A/C unit which is an Ameristar American Standard brand. I was pretty surprised when the guy next door who was licensed in HVAC said this unit is a 1990 something unit making it close to 30 years old. So far he was having problems getting it to work & said he’s going to look at a valve at the furnace next. I don’t know all the troubleshooting methods but the fan goes on & it was somewhat cool-he had testing devices so we’ll see. I’ve read the average life of these central A/C units is like 15 years old so it looks like I just might have to replace this unit
@@picklerix6162 Well, 27 years is really good but since that’s about the level I’m at now, it may be time for me to replace it. I’m going to start researching these brands-I’m thinking they’re not made like the old ones as everything has cheapened over the last decades
Melted wiring like you see in this disconnect is usually caused by high resistance, rather than a short circuit. Reason being is that wires are designed to take the max current of the circuit breaker without overheating, ever. The only way something will get melted is if the current carrying capability of the wiring is limited, in this case, by a loose screw. There is always a slim chance that the breaker is welded closed AND there was a short circuit, so it's still necessary to check for a short in the capacitor, the fan and compressor motors, just as you see in this video.
@7:07 "Mothafuccckka!" LOL
@@Corey-dy2cq yeah.. I worked with a gal, she was the daughter of a Merchant sea man. She's got it, Hard working life long, up early. I appreciated her 'irreverence'. She was also a good character too though.
Lol. I watched that a couple times.. LMAO..
A brilliant viewing again Steve never miss a blog and a laugh some man
About 7 years ago one of my disconnects (it was a switch not a pull out) melted and must have caught on fire all charred around it. Lucky the house didnt burn down. . It popped the breaker.
Luckily, I was able to pick up another one locally and just swap it out. Reset the breaker. And it's been fine for the last six years. No idea why it happened, but now, after watching your video. It must have been loose connections in there from the prior homeowner.
Great job, Steve. Keep up the great work!
Wow, a lot of problems in that one Steve! Good fix!
Keep rocking & rolling Steve & Mrs Molly... Got bless
When the compressor Cap is so bad that you don't think to check the fan Cap. Come for the knowledge stay for Ms Molly!
I think there was so much wrong with the unit that Steve didn't check everything. Just get the old beast running for now. . .
Melted disconnect happened on my condo unit. They used those cheap builder disconnect switches and saved 20 cents apparently and the wire was loose causing the pullout plastic to melt.
Steve needs a power screwdriver, for all the housing panel screws.
I was thinking the same.
@@crapalator Yeah for sure.
Howdy Steve and Miss Molly
Nice new intro to your video with the disco ball
The flame the flame. Sub panels don't make good electric heaters. Great job.
Like the Ford work truck Steve and Molly.
Hi Steven and Miss Molly 😃🖐🏻Have a Great weekend 👍🏻
Texas Lady😊
Ye Ha she's running!Goog job Steve!
Thanks Steven, this one was different!
"GUNSLINGER FOR HIRE", thxs for sharing...
Good job Steve
Man, these business owners let that unit go to hell then call you in to fix everything on it, i guess they have never heard of preventive maintenance 🤦🤦
My coworker use to say the disconnect is Krispy Kritters.
Closing in on 200k!
I would have checked both while they were out just in case to save a bit of time in case both were bad as is what happened.
i have had to change the cap in my furnace for the lower motor, it was still working but it was slow at getting up to speed.
first video I've watched of yours, and i'm your 1000th like
Another kick ass video Steve, great job! 👍 💥💫🫵☝️
Bro I'm loving the content
Nice job Steve!!
It's a Crusty one Mr. GRINCH.
...ain't no Taj Mahal , momma!
She's a runner, she's a track star!
Great job, Steve.I knew you would figure it out you and miss Miley.Take care
I would go to church every Sunday if my air conditioner would last 20 years.
I am not sold that split systems can last 4 years.The motherboards go obsolete in less than 5 years.
Hello Steve!
Good job
steve put your service sticker on the merch site, i want to buy some, great vid!
I would have checked both capacitors when you had both out the first time geez
Looks like when you leave a beer can in the freezer! Whoopsies!!
She's a Runner!
hi steve always, I watch your video. It’s helpful a lot. i just got my diploma in hvac 2 years ago please can you help me with the low voltage wiring for bosh ids heat pump with heat strip i use t4 Honeywell thermostat thank you
Steve, what have you done with those 10 John Deere tractors you worked on when you were shut down because of Covid?
I dont blame
U for playing in straight. It doesnt pay to take chances.
You just know that Karen demanded to see that daycare's manager because her precious little Brayden and Jayden were slightly too warm for 2 days
I’m having trouble with my central A/C unit which is an Ameristar American Standard brand. I was pretty surprised when the guy next door who was licensed in HVAC said this unit is a 1990 something unit making it close to 30 years old. So far he was having problems getting it to work & said he’s going to look at a valve at the furnace next. I don’t know all the troubleshooting methods but the fan goes on & it was somewhat cool-he had testing devices so we’ll see. I’ve read the average life of these central A/C units is like 15 years old so it looks like I just might have to replace this unit
My Lennox condensing unit lasted 27 years which is a long time considering the installer never put a dryer on the liquid line.
@@picklerix6162
Well, 27 years is really good but since that’s about the level I’m at now, it may be time for me to replace it. I’m going to start researching these brands-I’m thinking they’re not made like the old ones as everything has cheapened over the last decades
Dang! New Fedex truck and brakes are squealing already
Need to service your stuff.
How many microFaggots was that swollen one?
I enjoyed the Video!👍☺️
A pile of American Standard. Steve
YOU'RE AH MEAN ONE STEVIE LAV ...NICE JOB
Hey Steve and Miss Molly! Workin’ again ya’ll. 👍👍