Honda nsr 125/180 jc20 malossi Vmax

แชร์
ฝัง
  • เผยแพร่เมื่อ 16 ต.ค. 2024
  • Honda nsr 181 jc20 , carburator phbh 28, main jet 148, all racing exhaust, W reedvalve from italkit, front spocket 14t, rear sprocket 35t, fron wheel 10/80 r 17", rear 130/70 r 18". Carburator has not been adjusted after puting 148 jet, mixture screw turned out 1,5 turn just tu make it run for the test. Sorry for shaking camera holder wasn't enougt tighten. Camera angle very wide so 158 km/h from camera perspective is about 160 from drivers view. Spedometer checked with gps. No down hill, road was sthaight sometimes up hill.

ความคิดเห็น • 3

  • @ricksallotment5923
    @ricksallotment5923 2 ปีที่แล้ว

    Hello sir. Top speed in mph please with mallosi kit thank you.

    • @mn494
      @mn494  2 ปีที่แล้ว

      Top speed in km/h but on carburator 26mm with malossi should have minimum 34mm carburator. I have it on but just finished tuning it in late autumn and didn't test it properly yet. So first film with top speed will be placed on spring.

    • @mn494
      @mn494  2 ปีที่แล้ว

      Top speed with this carburator settings in mph on a straight road small wind is what I achieved 100 mph. I did only one test with this 26mm carburator because I already had bigger and wanted to put it in ASAP. It maybe would do 10 mph more in a perfect weather conditions but it would be struggling I suppose :)