48-RE Transmission - Valve Body Kit installation

แชร์
ฝัง
  • เผยแพร่เมื่อ 11 ธ.ค. 2024
  • This is a video of a 48-RE Transmission valve body kit installation.
    Even if no valve body kit is installed on a unit like this, is still a good idea to remove the valves one by one. This will reveal the condition of the valve bores. If there is severe scoring, the valve body needs to be replaced.

ความคิดเห็น • 128

  • @doug213
    @doug213 9 ปีที่แล้ว +1

    This was way out of my league but I could not stop watching! Beautiful craftsmanship. Especially putting that c clip in at the end. There is something they call "fine motor skills." It describes the way someones hands work. Something you probably don't think about, but God gifted you in the "fine motor skill department." Thanks again. May God Bless you

  • @ikashibimauler
    @ikashibimauler 9 ปีที่แล้ว +4

    Thanks for the inspiration. I just got done pulling my 42RE valve body, cleaned it fully with bench buddies, replaced the solenoids and installed a shift kit. Everything is working great. It was an adventure I am glad I went on and I would have never had the balls to do it without your videos! Thanks again!

  • @happy543210
    @happy543210 10 ปีที่แล้ว +17

    Don't worry about the length! these videos are fantastic. please keep them coming!

  • @DirectCurrent4u
    @DirectCurrent4u 6 ปีที่แล้ว +2

    What a great video! Without this video I would never want to attempt to do my own 48RE. But after watching this video a few times now I am sure i can do it no problem. Thanks so much for taking the time to share this information with us all. Love your Videos!!!

  • @dustinsmart8528
    @dustinsmart8528 4 ปีที่แล้ว +2

    Great video! This is one of the best videos I have watched on the 48RE. Thank you for doing the extra video work and for providing such detail in your descriptions. This really helped me a lot.

  • @fgalaviz00
    @fgalaviz00 9 ปีที่แล้ว +1

    Thanks alot karnal... i got a 97 jeep grand cherokee with a 42RE.. tryin to learn everything I can about it to improve it as much as I can.. this video is very informative.. especially at the end

    • @ikashibimauler
      @ikashibimauler 9 ปีที่แล้ว

      fgalaviz00 Me too, but a 99 with the 42RE here. Did you understand where exactly that check ball is on cooler line? Is it right up against the transmission or nearer to the radiator?I had no idea one was even in there...

    • @ikashibimauler
      @ikashibimauler 9 ปีที่แล้ว

      fgalaviz00 I just went out and looked and I dont see any signs of where it is. Maybe it is right next to the transmission inside the connection?

  • @sinned1359
    @sinned1359 8 ปีที่แล้ว +1

    Gotta say Hiram.. You did an impeccable job putting together this video for others. I used it to help me assemble my VB in my srt10. Keep up the good work bud.

  • @bakes0019
    @bakes0019 6 ปีที่แล้ว +1

    Love that Comatose by Skillet is playing in the background. Nice video! It will help me a lot in the next couple months when I tackle a 48re rebuild on my own.

    • @frankguerra3314
      @frankguerra3314 3 ปีที่แล้ว

      So how did it go ..just wondering.im about to open it up

  • @matthewzuber9823
    @matthewzuber9823 6 ปีที่แล้ว +1

    i don't even have this transmission, but i'm learning so much from it!

  • @jackprick9797
    @jackprick9797 2 ปีที่แล้ว

    Thank you for doing this video. Very helpful to have detailed step by step instructions.

  • @thespecialtist4513
    @thespecialtist4513 7 ปีที่แล้ว

    this is my favorite u tube channel !!! I'm retired but I still live and breathe automatics. thank you Hiram for what you do so well my friend !!!

  • @moadeebjudahbenisrael2030
    @moadeebjudahbenisrael2030 10 ปีที่แล้ว +3

    Great Job Hiram,Don't give the length of you vid's another thought and we appreciate what your doing.

  • @TheBiGamE
    @TheBiGamE 10 ปีที่แล้ว +9

    wow..thats an hour and 16 minutes of enjoyment....keep it up man

  • @basketballjones6782
    @basketballjones6782 6 ปีที่แล้ว

    Thanks for the tips! This gave me the confidence to do this myself, but I think I messed up somewhere. For some reason, it sometimes doesn't shift into 3rd gear. When it does, it does good. Seems there's no rhyme nor reason to it. And I even followed your video 100%, including holding the separator plate above my shift valve body while drilling holes, and using a power tool to screw the body back together.

  • @Vintageguy73
    @Vintageguy73 10 ปีที่แล้ว

    You are a very skilled craftsman, thanks for producing these videos Hiram.

  • @sheldonvanek9791
    @sheldonvanek9791 8 ปีที่แล้ว +2

    Great job! Teaching a lot of people on the shift kit, hope it was a Trans Go Kit.

  • @williamkostecki5575
    @williamkostecki5575 5 ปีที่แล้ว

    Thank you for this video it made working on my valve body go about as smooth as it could be

  • @jayjohnson165
    @jayjohnson165 8 ปีที่แล้ว +3

    good job, i find it much easier to install the park rod and e-clip onto the vb while its on the bench. Then install it as a unit into the transmission. Just have to rotate the output a little bit to get the rod to line up. Seems to work much easier, i always drop that stinkin e-clip.

  • @rbarr1200
    @rbarr1200 10 ปีที่แล้ว +1

    I'm so glad I found this channel !

  • @timstanford3443
    @timstanford3443 ปีที่แล้ว

    Dude, I have learned so much from you! Keep up the great videos

  • @RobertoRodriguez-vy2eg
    @RobertoRodriguez-vy2eg 5 ปีที่แล้ว

    the best video for assembly this 48re body valve

  • @iraotley9350
    @iraotley9350 2 ปีที่แล้ว

    Video helped a lot in doing my 48re thanks.

  • @thereelangler2391
    @thereelangler2391 4 ปีที่แล้ว

    This video helped me a lot. Thank you for posting!

  • @bash5995
    @bash5995 10 ปีที่แล้ว +3

    Great job Hiram, another awesome video! Can you make a video that shows you cleaning the parts and maybe discuss some of the things to avoid when cleaning?

  • @63256325N
    @63256325N 10 ปีที่แล้ว

    Man, when you were trying to get that e-clip on the shifter shaft I was thinking, screw us viewers, move the camera so you can see! LOL. Great job. Love to watch your work. You're really good at what you do and make it look easy. Thank you very much for sharing your knowledge.

  • @willywilly3944
    @willywilly3944 9 ปีที่แล้ว

    Outstanding tutorial! Thank you for posting.

  • @greglysne3260
    @greglysne3260 4 ปีที่แล้ว

    Definitely miss your videos

  • @mikesnyder2335
    @mikesnyder2335 7 ปีที่แล้ว

    Thank you ! installing the kit today !

  • @davidtweeddale2027
    @davidtweeddale2027 3 ปีที่แล้ว

    Excellent! Thanks so much. Your a real pro.

  • @JDLyon-dd3ff
    @JDLyon-dd3ff 4 ปีที่แล้ว +1

    Did I miss you installing the bushing, 3/16 ball and white spring under the new transfer plate? Page 5 is telling me to install

    • @bmanj5435
      @bmanj5435 3 ปีที่แล้ว

      I think his directions are different mine says the same thing yours did

    • @alfredorhs
      @alfredorhs 2 ปีที่แล้ว

      you are right, is in the pag 5, but is nice video I learn a lot,

  • @donjackson8816
    @donjackson8816 8 ปีที่แล้ว

    One more fantastic job. Don

  • @100Ronster
    @100Ronster 10 ปีที่แล้ว +1

    Great video! I like the longer videos.

  • @t.c.3027
    @t.c.3027 2 ปีที่แล้ว

    I just hit that 1K fa ya Bud! Enjoyed the entire process, thanks & add yourself another sub!

  • @ikashibimauler
    @ikashibimauler 9 ปีที่แล้ว +1

    Thanks for not just stopping at the valve body section. That tip about the check ball on the cooler line on 42REs is gold! Your videos are so inspiring. Is that check ball right up against the transmission or is it up by the radiator?

  • @badmatt4227
    @badmatt4227 3 ปีที่แล้ว

    1:05:00 the clip
    I found this clip in the bottom of the pan. Do I need to remove the valve body to reinstall it?
    Also, should I buy a new e-clip?

  • @ULFLYER5
    @ULFLYER5 3 ปีที่แล้ว

    Great video. Thank you.

  • @kestergascoyne6924
    @kestergascoyne6924 4 ปีที่แล้ว

    Thanks for this upload man.

  • @dansouthy1157
    @dansouthy1157 5 ปีที่แล้ว

    Made my rebuild a breeze there's been a few new parts added kit which was easy to add-hope everyone remembers to-Like- to say thanks

  • @solomonkahla6310
    @solomonkahla6310 9 ปีที่แล้ว

    Great video and editing! Thanks for the info

  • @jwlynch949
    @jwlynch949 9 ปีที่แล้ว +2

    I have a 04 dodge welding truck. would it b better to drill 1 or 2 holes with me pulling a travel trailer?

  • @samyjeeves3443
    @samyjeeves3443 3 ปีที่แล้ว

    AWESOME VIDEO LIKE A MOVIE.

  • @possumpopper89
    @possumpopper89 4 ปีที่แล้ว

    I am about to buy a dodge Cummins that will likely have this transmission. I plan to install a valve body kit to help the transmission hold up better behind that Cummins.

  • @brenterlenback5570
    @brenterlenback5570 4 ปีที่แล้ว

    Its helpful I have a bad accumulator piston for my 46re and I'm going to rebuild valve body complete with shift kit

  • @williambaker7351
    @williambaker7351 7 ปีที่แล้ว

    Great video, you have the teardown of the 48re and rebuild of the valve body what about rebuild of the rest of the transmission?

  • @tracycolorado
    @tracycolorado 10 ปีที่แล้ว +2

    you are the man

  • @bakadeshi_aunstudios
    @bakadeshi_aunstudios 7 ปีที่แล้ว

    Great presentation, I'm about to install the Superior version of the shift kit on my 42RE and this helped me get a good idea of what to expect even though its slightly different from the Transgo kits. Just did a rebuild of the rest of the transmission, and although its working pretty good, I would like to firm up the shifts some. One question, where is the checkball on the cooling line, I was not able to find one, though it may be that the previous owner already took it out.

    • @bakadeshi_aunstudios
      @bakadeshi_aunstudios 7 ปีที่แล้ว +1

      nevermind I found where it is in a different video.

  • @timothycarey4629
    @timothycarey4629 24 วันที่ผ่านมา

    What would cause a stuck in first gear problem replaced 2nd gear band and added a sonnex billet accumulator

  • @geojor
    @geojor 9 ปีที่แล้ว

    thanks for your efforts...

  • @ListeriX
    @ListeriX 8 ปีที่แล้ว

    Hi Hiram, can I ask you a question?.. in 17:08 minutes, you remove the two springs and valves from the valve body..there are not the same strength, could you tell me which one of them is the stronger spring? i was disarming the same part and the springs flew away

  • @matafdo123
    @matafdo123 8 ปีที่แล้ว +2

    Hey Hiram, Your a real pro at this. Do you do mail in repair? Im replacing my front band on my 48re. But want to do a shift kit while in the bottom of the trans.

  • @Santiagovillamaria
    @Santiagovillamaria 9 ปีที่แล้ว +1

    Hiram, tengo una Ram 2500 diesel con una 48 RE con sobre marcha, fue reparada por alguien que al parecer no tiene mucha experiencia. El problema que tengo, cuando pasa de 3ra a 4ta queda libre de tracción y las revoluciones se llevan , hasta que nuevamente engancha y hace el cambio si reduzco la aceleración, es problema de placa de válvulas mal armada?, el convertidor?

    • @filiaguilar474
      @filiaguilar474 9 ปีที่แล้ว

      +Santiago C tengo creo la misma falla la pudiste solucionar ,gracias por tu respuesta

    • @Santiagovillamaria
      @Santiagovillamaria 9 ปีที่แล้ว

      NO he tenido respuesta de este hombre

    • @Santiagovillamaria
      @Santiagovillamaria 9 ปีที่แล้ว

      Por ahora la uso casi, creo que el problema esta en alguno de los discos, todavía no tome coraje de sacarla, es muy pesada, pero ya lo haré y te cuento

  • @billhamilton2366
    @billhamilton2366 8 ปีที่แล้ว

    excellent demonstration video. It is obvious you know what you are doing and you are very familiar with this transmission.I have a 2003 dodge ram 2500 2 wd I am about to install a 10 foot heavy truck camper on it. I am also interested in upgrading a vb kit in and want to determine the health of the tranny before I get stuck at the side of the road due to carrying a heavy load in a truck with 124k miles. Thanks for the video

  • @Nathang2233
    @Nathang2233 3 ปีที่แล้ว

    Really good video

  • @frankguerra3314
    @frankguerra3314 3 ปีที่แล้ว

    I love your videos.is that what I have to do to mine vavlebody.i can move the gears when it out but it doesn't have all the gears when installed.

  • @nate5102
    @nate5102 3 ปีที่แล้ว

    Why don’t you use the early style double sided filter ?

  • @BOATMON-jc7iw
    @BOATMON-jc7iw หลายเดือนก่อน

    do you have a part number for the small filter inside the valve body?

  • @roberthernandez2761
    @roberthernandez2761 9 ปีที่แล้ว

    excelent job hiram,i have a 2002 dodge ram with a 46 re transmission and all this videos help me a lot, the only queation i have for you is all the drilling that you did to the valve body it's a must or you can just replace everything else? or what that doest? thank robert hernandez

  • @rodneyhunter3233
    @rodneyhunter3233 8 ปีที่แล้ว

    Great video Hiram. I have a 07 Dodge 3500 w/5.9 that is getting a P1740 alarm and will not go into torque lockup like it used too. It shifts and drives fine other than not going into lockup. I have change solenoids, transducer and torque lockup solenoid and still having the alarm. I installed a Transgo shift kit in after watching you video thinking it will make the pressure go up a little and make it lockin harder. After installing the Transgo kit, the only difference is it goes from 1st to 2nd to 3rd extremely quick. I am debating about torque converter but would like your opinion before moving forward. It does go into torque lockup at times under a load pulling a trailer but its random when it happens.

  • @Jacobawilde
    @Jacobawilde ปีที่แล้ว

    On the center governor plunger what size is that spring the 1 I took out doesn't make the plunger pertrude it sits about 1/2 in the hole?

  • @brenterlenback5570
    @brenterlenback5570 4 ปีที่แล้ว

    What happened with the bolt that looked like it was rubbing on something?

  • @StefanSilber-l3x
    @StefanSilber-l3x ปีที่แล้ว

    Hello!
    I installed this kit exactly as in the video and now I have the problem that the transmission shifts very hard when shifting from 3rd to 4th gear.. what can be the reason?
    Thanks!

  • @lucky13sss10
    @lucky13sss10 9 ปีที่แล้ว +1

    Thanks Hiram. just have a quick question. what shift kit (trans-go vs superior) and rebuild kits do you prefer for the 48re? thanks in advance

  • @1975lowrider1975
    @1975lowrider1975 9 ปีที่แล้ว

    Awesome excellent videos.Its like a art.Very fine and detailed.Mr.Gutierrez I know this is way off the subject for this video.Can you please make a complete tear down and rebuild video for B4RA transmission.It goes into a 1997 Honda Civic 1.6L D16Y8 motor.I know you are very familiar with this transmission.I just need help pretty bad.Thanks

  • @adriankleckner1
    @adriankleckner1 8 ปีที่แล้ว

    im also installing a shift kit on my valve body as well i was also wondering what the torque specs are for the assembly of the valve body.

  • @eganmag
    @eganmag 8 ปีที่แล้ว

    I think this is great of u to do all the video's. But I wish u lived in Mass and could tell us if it's our transmission on our car that might be the reason why we are having with our car, If u have a way for me to contact u to ask u questions please let me know. Thank you so much

  • @LuisCano-f4y
    @LuisCano-f4y ปีที่แล้ว

    😅 gracias por esa esplicacion

  • @terrytomlinson1705
    @terrytomlinson1705 8 ปีที่แล้ว

    Great video!!!

  • @jackvance285
    @jackvance285 6 ปีที่แล้ว

    Transmission performance?
    I had my transmission rebuilt and it was poorly done. Within 11000 miles the torque burned out, They replaced it, the truck transmission would never perform as it was designed.
    I visited several transmission places and all said the guy did a bad job Daaa; and should have put in new or rebuilt the valve body, because that was the problem. I was broke and did not have the money to spend $3500.00 (?) for another rebuild.
    So, I have been driving around the country in my 98 Dodge 2500 Ram Diesel, 5.9 w$2500.00 turbo and a fuel plate, with an 47re automatic transmission, w/no trailer and also w/a horse trailer, I never got over 14 MPG, but I did get poor shifting and no automatic down shit on hills and no passing gear. There was No slippage during this period and presently there is no slippage.
    I was doing some routine work on the truck and was researching on TH-cam. I found this video and watched it.
    This is the most astute, detailed, clear and concise demonstration I have seen on the functionality, purpose and diagnostic video I have seen on the Throttle Position Sensor.
    I
    watched it several times. Each time I was able to more clearly understand the affect and effect this sensor created in relation to the transmission.
    I had several and more Transmission “Experts” tell me the problem with my 98 Dodge Ram, Diesel, 47RE transmission was: everything BUT“ the Throttle position sensor. I removed the Throttle Assembly for the purpose of installing new bushings.
    I thought, while I had the sensor off I would replace it if it was bad. I took the sensor to three garages and they tested it with an Ohms meter and for free saying, Its working…not one of them tested the mechanical function of the sensor. :(
    I carried the Bell,Crank, Lever and sensor with me to the several Parts place; to insure I would buy the correct bushings. When asking for the Bushings, I had them also test the Sensor, all said it was good, I thought Oh” good I save $, again none of them tested the mechanical function of the sensor.
    I was playing with the Sensor while I was at the Parts counter, Just messing around, I stuck my Dodge ignition key into the Cam slotted twisting it open and letting it return to it resting position.
    I did it many times and then I noticed the Cam was easy to turn and slow to return. When they tested the Sensor for resistance, I ask them about the Cam spring loaded movement, they said it was supposed to work that way. OK:)
    I went back to the house and watched the complete video again. This time I paid close attention to the Bell Crank lever. During the re-assembly the person in the video pushed the Lever several times and when release, the lever would spring back to the neutral position.
    The person in the video said, when the throttle position changes, the sensor send a signal to the transmission, to change its function, when the throttle is released the Bell Crank lever, being spring loaded snaps back to the numeral position and again the sensor sends a signal to the transmission and it responds to that throttle position.
    I tested my sense and, as I learned while at the Parts place it did not spring back to the numeral position, in fact it would only go so far on its return action and then quit moving, I took a little screw driver and inserted into the Cam slot and rotated the cam back to the neutral position. I did this many times and decided this function of the Sensor was not performing as it was designed to.
    I went back to the O”Rileys, Part Place, bought a new Sensor, tested it on the sport and it functioned properly. I went home installed the sensor on the assembly and reinstalled the assembly.
    I drove the truck down street and immediately was shocked in the 1000% improvement in the performance. Although I was excited, I thought I would still drive the truck down a long winding the hill to the river and back up the same hill.
    I was ecstatic over the results. It was like driving a new truck. I said, OK lets see what happens when I press the throttle for the passing gear to kick-in, Boy did it. I was totally happy and relieved. My truck was finally operating like a power house that it was.

  • @tradersnotion
    @tradersnotion 10 ปีที่แล้ว

    Nice! Thank you for your videos! This one is like going down memory lane. :-)

  • @garyfree6358
    @garyfree6358 6 ปีที่แล้ว

    THANKS....watched every min. good stuff, will come in handy when i put in my cascade shit kit.Wheres the check ball in the cooler line. i want to get rid of it....let us know....

  • @flubyux2
    @flubyux2 6 ปีที่แล้ว

    Love your vids. Some of the best tech I have found on the Internet.
    Maybe you can shed some light: 2006 48re with no tcc apply. All gears shift fine. Replaced all electronics. Added lockup switch. Adjusted bands. Added DNJ gov sol conversion. You mentioned the boost valve clip breaks... Could this bleed off Tcc apply pressure and stop my truck from locking up?

  • @donjackson8816
    @donjackson8816 7 ปีที่แล้ว

    What is the book you are reading from with pictures?? Please help me that is fantastic information. Don Jackson

    • @donjackson8816
      @donjackson8816 7 ปีที่แล้ว

      hI fRIENDI AM 70YEARS OLD AND LIVE 20 MILES SOUTH OF Birmingham. I am just beginning my phase of learning. Do you have a set of these books extra. I will just be building for friends and relatives. I might add just for fun! Thanks Don

  • @danilo3247
    @danilo3247 9 ปีที่แล้ว

    hello ...
    I am in Brazil and wanted to thank you for your lessons
    by chance you know how I can buy parts for this transmission 48re

  • @apr9286
    @apr9286 7 ปีที่แล้ว

    Is there a way i can test and chexk the lock up solenoid if its working? My truck torque converter seems to be lock, the truck wanna keep moving forward at stops and motor starts to choke up. Or is o my TC?

  • @unboundghosts2512
    @unboundghosts2512 22 วันที่ผ่านมา

    I put the kit in and after installing it it won’t go into park unless I pull the cable off and move it to park from the shifter it goes in all gears help please

    • @AutomaticTransmission
      @AutomaticTransmission  18 วันที่ผ่านมา +1

      Adjust the shifter cable.

    • @unboundghosts2512
      @unboundghosts2512 17 วันที่ผ่านมา

      @@AutomaticTransmissionthank you I was able to figure it out. Thanks for the vid helped a lot and very well explained!

  • @danilo3247
    @danilo3247 9 ปีที่แล้ว

    hello ...
    I am in Brazil and wanted to thank you for your classes ...
    by chance you know how I can buy parts for this transmission 48re

    • @t.c.3027
      @t.c.3027 2 ปีที่แล้ว

      EBay maybe taking chances, I use "Cobra Transmissions", they have always been on point w/me! Check em out!

  • @i94south34
    @i94south34 10 ปีที่แล้ว

    Hello Hiram
    whats your opinion on the ford 6F35 Transmission,and that you have to remove the unit and split it in half to change the filter/pump, which is one unit?

  • @Hidromatico
    @Hidromatico 9 ปีที่แล้ว

    Gracias.

  • @nickhill4017
    @nickhill4017 7 ปีที่แล้ว

    so I just had to remove this is it possible if its not reinstalled right that the vehicle wont start? thank you in advace

  • @babybullsmith001
    @babybullsmith001 9 ปีที่แล้ว

    Good video sir.Where are you located at?

  • @jcjr2869
    @jcjr2869 4 ปีที่แล้ว

    1:49 what's that that u just took off??????????

  • @j023909
    @j023909 ปีที่แล้ว

    What kits did you use?

  • @anthonyschaffer9722
    @anthonyschaffer9722 2 ปีที่แล้ว

    Where can I locate this kit

  • @williambertone332
    @williambertone332 4 ปีที่แล้ว

    Hello great video very helpful. I have a question. Is it normal for my 48re to go into lockup while in manual 2nd gear ? I have an 04 ram 3500 cummins. If its not normal any idea what could cause this ? The lockup also comes on right after OD at around 50 mph. Thank you and keep up the great work 👍 👍

    • @ConTheDon187
      @ConTheDon187 4 ปีที่แล้ว +1

      could be the governor pressure sensor or solenoid. They're known to be problematic and cause shuttle shifting. Or the torque converter. But I'm no expert

    • @williambertone332
      @williambertone332 4 ปีที่แล้ว

      @@ConTheDon187 the truck seems to shift pretty good except it shifts to smooth and im not sure what I can do to make it shift firmly. Is it not normal to lock up torque converter in manual second gear ? This is my first diesel truck. Thanks for your help👍👍

    • @ConTheDon187
      @ConTheDon187 4 ปีที่แล้ว +1

      @@williambertone332 I'm not sure what you mean by lock up torque converter in manual. You could try adjusting your bands, but a shop with a decent scan tool could tell you, I'm not an expert with automatic transmissions, so some of the stuff I'm still learning about, but the torque converter shouldn't luck up until 35mph from what I read, so it should be locking up in 3rd and over drive. I'm pretty sure

    • @williambertone332
      @williambertone332 4 ปีที่แล้ว

      @@ConTheDon187 no problem I will see what else I can find online. Thats the problem buying a used truck not knowing what has already been done. Thank you for your help.

    • @ConTheDon187
      @ConTheDon187 4 ปีที่แล้ว +1

      @@williambertone332 Yeah I just bought an 06 3500 and it's low mileage but I've got a problem that I can't seem to find any good information about so I've been searching daily for any info that could help me, gotta love dropping 20 grand on a truck to find it may need a transmission haha

  • @richardprice5978
    @richardprice5978 8 ปีที่แล้ว

    37 RE transmission valve body what year of 2wd cars did it come on ? efiing my 1969 car 727 T 383 E LSA ecu

  • @glnset-apart
    @glnset-apart 3 ปีที่แล้ว

    Thank yu!

  • @Firehawk831
    @Firehawk831 8 ปีที่แล้ว

    hey i wanted to see if there is a big difference between 46re and 48re. and can i use this video to rebuild my 46re with the reprogramming kit

    • @jayjohnson165
      @jayjohnson165 8 ปีที่แล้ว +1

      there are slight differences in the transmission its self, such as the 48 has steel planetaries, 46 are aluminum and the sun shell is thinner. The valve bodies are also different, but watching this video will get you by. Just follow the instructions that come with the trans-go kit and you will be good to go .

  • @moshe2002
    @moshe2002 10 ปีที่แล้ว

    thank you

  • @omarmonzo5426
    @omarmonzo5426 7 ปีที่แล้ว

    what is the part number to fix the parking link?

    • @AutomaticTransmission
      @AutomaticTransmission  7 ปีที่แล้ว

      +omar monzo I don't have it handy, but go to the Transgo website and search for it there.

    • @omarmonzo5426
      @omarmonzo5426 7 ปีที่แล้ว

      ok thanks

  • @JuanSanchez-vv5wk
    @JuanSanchez-vv5wk 7 ปีที่แล้ว

    What did you use to clean the valve body? Thanks.

    • @t.c.3027
      @t.c.3027 2 ปีที่แล้ว

      Most likely mineral spirits, although paint thinner or charcoal lighter fluid works great also! i.e.,those last two are ancient chinese secrets!

  • @lordofwar1234
    @lordofwar1234 7 ปีที่แล้ว

    How do I contact you, to see if you guys would do this to my valve body, if I take it out and send it to you

  • @cvcalitos
    @cvcalitos 6 ปีที่แล้ว

    Mr.transmission can you build me a valve body for my 04 Dodge Ram with 5.9 diesel ? And how much would it be ? Thank you

  • @nicolaslante9513
    @nicolaslante9513 4 ปีที่แล้ว

    Hi Hiram or anyone who can help me! Hahaha! I am writing to you from Chile .. my 48re engage and disengages, engage and disengages from 1 to 2.... ..It is more frequent when I go uphill and with little of gas. does anyone know how to fix it ?? thanks!

  • @tylerknox4204
    @tylerknox4204 4 ปีที่แล้ว

    What kit is this?

  • @garyhoffman4653
    @garyhoffman4653 4 หลายเดือนก่อน

    You are good.

  • @omarmonzo5426
    @omarmonzo5426 7 ปีที่แล้ว

    hello hiram what is a multi clutch coverter?

    • @AutomaticTransmission
      @AutomaticTransmission  7 ปีที่แล้ว +1

      +omar monzo All torque converters have a clutch in it. For normal duty. When you start adding power to the engine the factory single clutch with get damaged. That also damages the transmission. If you add power to the engine, you will need to replace the converter for a 2 or 3 clutch converter AND installing a Shift Kit to the transmission.

    • @omarmonzo5426
      @omarmonzo5426 7 ปีที่แล้ว

      so shift kits for this unit, usually builders install it when you used a 2 or 3 clutch clutch converter?

  • @ricardorodriguez-se7tp
    @ricardorodriguez-se7tp 5 ปีที่แล้ว

    Great video but 58:41 didnt sound good.

  • @leor1472
    @leor1472 7 ปีที่แล้ว

    Hey question if the plastic broke while getting pulled out can it be replaced? And whats that part called?

  • @avgautocenter6305
    @avgautocenter6305 7 ปีที่แล้ว

    you are a MESTRO

  • @howardtreadway3223
    @howardtreadway3223 7 ปีที่แล้ว

    cant fall in love again but it was close and also not gay youve saved my couple times allready simple fast but not toofast an precise perfect for me cause time is likewise yeah