This is a very helpful video sir. I have a few questions. what battery source should we use, and could you kindly put a link to one. also is it possible to make this without the kit, and make the pieces ourself?. thank you.
@@sritu_hobby Barokalloh.. Terima kasih atas informasi dan ilmunya. Sukses selalu ttp semangat berbagi ilmunya semoga berkah.. Aamiin YRA. Salam dari Kami Ciamis Jawa Barat, Indonesia.
@@sritu_hobby sir, actually I am doing laser cutting of the robotics links, so I want to know what the appropriate diameter of hole I should take for screws. So that it will easily tightened in the hole. Thank you in advance.
We weren't able to move the servo motors when they're connected to arduino with motor driver. What sould be the solution? Thank you for the fast reply! 🙏
Also thank you for this video.. and I am doing a similar project by controlling the above robotic arm using HC 6 bluetooth module via voice.. any valueable inputs on that?
sir if I will control with hc-05 blutooth so is there will be any change in the code, if it will be please provide a code for it.. please sir give me fast
Sir, Amazing robotic arm. Sir, can you make a video on youtube on how to make an Xbox-controlled 6-dof robotic arm car using the Xbox 360 controller and can you give me the circuit diagram and the code for the Xbox-controlled 6-dof robotic arm car using the Xbox 360 controller?
hi sure thank you for this video for the project of the robot arm if i comment the 3 servo motor in the code the servo resté work correctly but if i use 2 servo or plus the robot didn't work correctly (one servo work)
Sir i have completed all coding & connection. Once i try to upload the coding to arduino board the system gave comment "a function-definition is not allowed here before '{' token". What it's meant sir ?
hi sir we are doing a project on this topic so we need your assistance to do this nor we can buy this product at cost we have each and every things needed for this project so we will handover to you and you can do that project and give to us sir please sir my kind request we need it before next week sir i am pleasing you sir
@@sritu_hobbyI know I'm kinda late but I don't get it do you change the degrees then upload the code all over again that takes time so yeah s**t I'm gonna have to a add a joy stick value and I've got a science fair next week so yeah
The “Ali-express” kit arrived without assembly instructions. your video saved me; a lot of thanks
Great to hear!
Thank you for this video, it helped a lot. Still I would recommend you do not switch to "fast forward" while assembling, that would have been better.
This is a very helpful video sir. I have a few questions. what battery source should we use, and could you kindly put a link to one. also is it possible to make this without the kit, and make the pieces ourself?. thank you.
SALAMAT SA IYONG TINURO NATUWA SI CLARK ACEDRON SA GINAWA MO 😘😘❤️❤️❤️
Goodday Sir, does the recorded movement of the robotic arm, will remain even if the arduino removed from the power source?
Can this be powered by usb only? Would the current provided by a laptop be enough to drive the servos?
You must connect external 5v power supply
What's in 15:41 5v+ and then 5v- what is the name od that on internet to buy?
I’m working on this arm project as my final year project, sir can you please help me out with it. I’ve really learnt a lot on your videos.
Hi
What's your issue?
Good..
Tank's very much Master..
Your welcome
@@sritu_hobby
Barokalloh..
Terima kasih atas informasi dan ilmunya. Sukses selalu ttp semangat berbagi ilmunya semoga berkah.. Aamiin YRA.
Salam dari Kami Ciamis Jawa Barat, Indonesia.
English???
I want to ask you that can I set all 4 servo motor with single common wire 4 in one motor driver servo motor port
It's not possible
the acrilic part at 6:47 is missing, it s not in he kit it magically appears
really loved the video thanks very much.
Your welcome
good evening sir, are you using self-threading screws, or if not then how it is screwing in the holes of the plate without thread.
thanks in advance
Sir please clear my doubt, it will be helpful for me.
Don't worry about it. Please use the normal screws.
@@sritu_hobby sir, actually I am doing laser cutting of the robotics links, so I want to know what the appropriate diameter of hole I should take for screws. So that it will easily tightened in the hole.
Thank you in advance.
Very amazing ❤❤❤❤
Thanks
@@sritu_hobby what to do, the code isnt working well, my robot arm did not move just like the way in the video
hi sir for the jumper wires, did you use male to male, or male to female or female to female?
Male to female
hi sir, if i want to have smoother movement from the robot, which sensor should i use?@@sritu_hobby
Thank Uh so much coz it helps me for my project I want to ask Uh one thing that is there any controller needed to control this arm? Plz reply
How much can it lift in weight plz tell
May I know the parts' dimensions of the robotic arm? Thank you in advance
Hello sir , can i use another robotic arm instead of this ? Will it work?
If we use a 9v battery for raspberry will there be any problem
How do we add the external source?do you hook the jumper wires to a 9 v battery?
Yah of course
Sir this is automatic or powered bye phone please tell😢❤
We can comand servo motors without pwm servo motor driver?
I'm making this gripper alone to attach with a drone.... can you help how to move the claw alone using remote?
You can use bluetooth module or wireless communication module for that.
@@sritu_hobby how to connect Arduino to Bluetooth module
Please visit my previous videos or tutorials
@@sritu_hobby can I connect Arduino with IR sensor and control using remote?
Yes of course.
What external power supply do you use?
If i will use raspberry pico will i still use pwm servo motor? Or different?
You much change the program
How did u get these pre-drawn materials ??
Can the robot arm kit use MG90 or MG90s servo or just SG90 servo, sir ?
Hi kits bhetatil ka tumchyakade ya robot che
Hi kits bhetatil ka tumchyakade ya robot che
Hi kits bhetatil ka tumchyakade ya robot che
What's the maximum weight it can pick up sir? .....great project 🙌🏻🙌🏻🙏🏻
I'm not try it.
@@sritu_hobby What could be your prediction?
Did u get any idea
@@gurugumaste5023a
hi sir, how you control the robot? fully automatic or use any device?
Which software you basically use to draw the circuit diagram
Sir can we use stepper motor instead of servo motor please reply!? With this same size and with this robotic arm kit
You must change code
@@sritu_hobby where can i find this code sir? Can u tell me
srituhobby.com or srituhobby app on play store
I have made a simple moter circuit by seeing your video but my moter driver shield is getting heat up pls tell
Watch that video again..i think it your motor driver issue
Which app you use to control the robot::: blynk app + have you used atmega for this…please reply
Please reply instead of liking the comment
No In the video it's selve the position are given so it will move continously in the same action
Can you tell me which program or what you are using to control this mechanism?
C language
We weren't able to move the servo motors when they're connected to arduino with motor driver. What sould be the solution? Thank you for the fast reply! 🙏
Do you have CAD or Solid drawings of it?
can we control this via mobile app ?
Can we use anyother Motor driver instead of the one shown in the video.. for example l298N or L293D??
Also thank you for this video.. and I am doing a similar project by controlling the above robotic arm using HC 6 bluetooth module via voice.. any valueable inputs on that?
You can make this project without driver board
@@sritu_hobbycan you put code for that ? Thx very mutch
MANTAP A LANJUTKAN
sir if I will add blutooth so is there will be any change in my robot
sir means is there will be any changes in my code
hello i tried to upload it but it just says srituhobby was not declared in this scope, please help me fix it thank you
Can we make it with arduino Nano also or not?
You can doit.
@@sritu_hobby thank you
sir if I will control with hc-05 blutooth so is there will be any change in the code, if it will be please provide a code for it..
please sir give me fast
is this arm can be powered by usb to arduino only? Because I suspect not enough current being provided
You can use external power supply for that.
@@sritu_hobby hi sir, why we need to use pwm motor driver in this project instead of just using arduino only
Where can i find a solid works design for that robot arm
No servo position control when building? Whaaaaast
I had problem on this 😢
Sir, Amazing robotic arm. Sir, can you make a video on youtube on how to make an Xbox-controlled 6-dof robotic arm car using the Xbox 360 controller and can you give me the circuit diagram and the code for the Xbox-controlled 6-dof robotic arm car using the Xbox 360 controller?
Ok sure
@@sritu_hobby, Sir, does the Xbox-controlled 6-dof robotic arm car using Xbox 360 have an Arduino Uno or not?
what is SDA and SCL pins in raspberry pi pico h ?
do i have to change the code if i change the servo into servo tower mg90s? if there is then please send it fast
@sritu_hobby please sir reply fast it is important
hi sure thank you for this video for the project of the robot arm if i comment the 3 servo motor in the code the servo resté work correctly but if i use 2 servo or plus the robot didn't work correctly (one servo work)
What type of power supply your using?
Can we use 360 degree servo motor ? Plz tell
Yes
Sir i have completed all the connection and upload the code
But i dont know how to operate with laptop
Reply me anyone as soon as possible
It operates automatically
Which servo did you use? 180° or 360°?
180
I did it but why the second servo 3 doesn't work, why?
Thanks so much! One problem - the code doesn't work, program says that "compilation error"
Please include the library files
@@sritu_hobby already
how are you controlling the arm, through a remote?
For that you can use bluetooth module
@@sritu_hobby sir for that is there will be any changes in code??
@@CoreXDigital esp8266 and esp32 have wifi module using that u can connect it with your phone using blynk app and gain control
@@CoreXDigital yes
Can you provide the control process
Sir i have completed all coding & connection. Once i try to upload the coding to arduino board the system gave comment "a function-definition is not allowed here before '{' token". What it's meant sir ?
Check your program curly brackets
on which mechanism this works.
Where xan i buy this?
Sir how are you controlling can you please describe
Hii sir we r doing this project and now we uploaded the code but its showing error
SolidWorks çizimleri mevcut mu?
No bro
@@sritu_hobby STL dosyası mevcut mu
I have the same arm but it doesn't work
Can you help me
Is that working automatically or you were controlling it with the laptop
No it's working automatically.
@@sritu_hobby Can You Please Make A Video On How To Make A 3d Printing Robotic Arm Please Please Please You Are The Last Hope I Have Got please....
Hellow
Will it work with 9v battery
Yah
@@sritu_hobby thanks very much
How much would you say it weighs?
Did you mean robot arm weight??
can i use raspberry pico?
Yah
@@sritu_hobby can you help me what alternate if for example there is no A5 or A4 in pico? thank you
hi i made all the right connections but my robot doesn't move, could you help me thanks?
Please check your power
@@sritu_hobby 5v how many amps power supply?
2A
Is there any way to change how it moves?
Yes of course. Please change the servo degrees for that.
@@sritu_hobby ok thanks
Bro where did you get this kit?😢
srituhobby.com
Thanks bro🎉🙂
What is it controlled with?
Auto control
I want to move robot but with joystick, how?
Can we connect i need to talks about it?
Yes
From where do you buy this body structure
amazon.com
hi sir we are doing a project on this topic so we need your assistance to do this nor we can buy this product at cost we have each and every things needed for this project so we will handover to you and you can do that project and give to us sir please sir my kind request we need it before next week sir i am pleasing you sir
Dude are you in any competition
From which country you are ?
Price kiti ahe.?
Bro Arm kit price enna bro
Can i make it voice control
Sir code is not in discription so please how to coded it please sir help me 🙏
Srituhobby.com
Firstly thank you. What battary source we use volt=?? , Amper or mA=???
how you passing commamd to move the arm
change the servo motor degrees
@@sritu_hobbyI know I'm kinda late but I don't get it do you change the degrees then upload the code all over again that takes time so yeah s**t I'm gonna have to a add a joy stick value and I've got a science fair next week so yeah
Sir can you provide the schematic of robot arm I will get it laser cut
Check it on google
Compilation error ; Adafruit_PWMservoDriver.h
No such file or directory
Brother how to solve this
Please include the PWM servo motor library.
where can I download the 2 libraries
Description
How do download Arduino Library mr?
what is material thickness and also screw size and thickness
Please visit the video description
Hanzhen harmonic drive gear , strain wave reducer ,
robot joint , over 30 years experience
Can I have the copy of your codes so blurred on the screen. Please badly need 🙏
Please visit the video description
how do i control the robot?
bro plz help!!! it is showing Adafruit_PWMservoDriver.h: No such file or directory plz plz help out!!! solution plzzzzzz
sir plz plz fast i really need it so badly
Please include the library file.
@@sritu_hobby bro it helped thanks
Bro one question
How to fix error in code 😢
PLASE CODE LINK
Is it remote controled.
No. It's moving automatically
@@sritu_hobby is there a way to make it rc. I'm working on a project so need to know.
You can do it.
how can i control it?how do i connect a controler to it
You can use a joystick module
How mach cast
How to control the arm??
You used blutooth module?
No its moving automatically
Hola hello