Thank you so much for this video, I haven't played on my wii for years and this was the reason I couldn't get it to work. But your tips worked AHHH!!!! You truly made my day!!!!!!!
My wii remote is connected but I don’t get that ‘hand’ that lets me natigate around. My home button works and I can use the + and - to move to next screen but no hand to navigate around ???
The motion sensor bar: the long thin strip sensor bar (about 30cm long) with a thin wire! Connect it to your Wii and place it on top of your TV (or similar position so that your remotes can SEE it). Hope then you CAN play ;=)
hi, no problem. You can remove your back cover, then find two AA batteries and place them in the remote control, now you can do the same as shown in the video. Have a good day!
the little will only appears and moves if only you have the positioning bar(a foot long bar, normally place on top of TV) is placed and connected! check that and good luck!
hi, you could try again. 1. make sure the wii console is on and you can see the picture on your TV. 2. put two good batteries into the remote and make sure that when you press any button, the four leds at the bottom of the remote flash. 3. Press the red buttton on the console and then press the red button on the remote. This method should work or may be some other issues. Good luck!
Without the sensor bar, the remotes can still connect to Wii console and switch it on/off, however the cursor on the TV screen will not move so that you won't be able to really control your game or play. Have a good day!
No arrow shown problem is normally due to the positioning sensor: it is a long bar and normally placed on top of your TV. Check your sensor bar. Good luck!
hi, you could try again. 1. make sure the wii console is on and you can see the picture on your TV. 2. put two good batteries into the remote and make sure that when you press any button, the four leds at the bottom of the remote flash. 3. Press the red buttton on the console and then press the red button on the remote. This method should work or may be some other issues. Good luck!
I’ve done this so many times but nothing happens. My remote turns on perfectly and lights up but when I click any button the TV doesn’t do what the remote is doing. So if I click A it doesn’t select anything on the tv. I don’t understand what’s wrong :((((((((
hi, if you can a steady led light on your remote, it means that you have connected your remote to your Wii. If you can see the cursor on your tv screen, it means that you have connected successfully. you could check if your remote receiver strip on the top of your tv is connected and positioned right? or try another remote from your friend! good luck!
@@pepprrr_cl16 it is a long (30cm ?) stripe with a thin wire connected to Wii console, for the movement detection of the remotes. It should be placed on the top of a TV. Good luck!
hi, you could try again. 1. make sure the wii console is on and you can see the picture on your TV. 2. put two good batteries into the remote and make sure that when you press any button, the four leds at the bottom of the remote flash. 3. Press the red buttton on the console and then press the red button on the remote. This method should work or may be some other issues. Good luck!
The motion sensor bar: the long thin strip sensor bar (about 30cm long) with a thin wire! Connect it to your Wii and place it on top of your TV (or similar position so that your remotes can SEE it). Hope then you CAN play ;=)
I have 2 remotes. One is from another wii and one is from my wii. In the past i syncronized both of the controllers and they worked just fine. Now they wont sync WHATEVER i do. The blue lights wont flash either. What should i do??????
hi, press any button: if no blue light at all, check your battery; if blue light flashing, it means not connected; if one blue light and no flashing, it means the remote has been connected. also make sure the motion detection bar on your TV is properly connected and positioned. good luck!
I have this problem and everyone says that i need to re-sync my wi remote. I pressed the sync button on wii remote and the lights blink but when i press sync on console the lights still blink and nothing happens. I have 3 wii remotes and all of them worked yesterday but suddenly today none of them work.
@@MTCTpl As I understand the console and/or the remotes should remember each other forever even the power is disconnected from the console or the remotes run out of batteries, unless the remotes have been connected to another console. You could try to unplug the console and remove the batteries from the remotes, then try again. It that not working, I am really running out of ideas! Good luck!
hi, it sounds like a possible problem with the console. you could restart the console by unplugging it from power supply, wait for one or two minutes, then plugging it in. good luck!
hi, how do you know your sensor is not working? They are normally good quality and reliable? I think it should be wireless signal between the remote and the console, and it should be infrared light signal between the remote and the motion bar. The infrared light signal is not visible even it is working. you may see the infrared signal light by using your mobile phone camera or a camcorder depending on the ability of the cameras. You could try with a pair of new batteries? it seems not cheaper to buy a second hand remote, could be £20? Have a good day!
@@b1uestars470 hi, another idea: you could borrow a remote controller from a friend and try if that remote controller works fine? Or take your remote controller to a friend house and try it on their WII console? By doing that you can be sure if the problem is with the remote controller or the receiver. Have a good day!
@@LFC82 you could try(1) the batteries in the remote are good so that at least three LEDs flashes? (2) you could try or borrow another remote to try? Have a nice day!
![Warhammer 40k: Space Marine 2 | เพื่อจักรพรรดิ ! [ตอนเดียวจบ]](http://i.ytimg.com/vi/4M0ckYMA4-U/mqdefault.jpg)
![Megan Thee Stallion - Neva Play (feat. RM) [Official Video]](http://i.ytimg.com/vi/TpYTyAaTRts/mqdefault.jpg)
You're the 7th person I turned to when I had this issue. You're the only guy taht actually worked.
Great, you made it! Have a good weekend!
Very helpful video for someone who is about to play their new Nintendo Wii for the first time! Thanks a million!!
THX ! I have not turned on my Wii in over 10 years. Totally forgot how to sync controllers, hahah.
Thank you buddy you have saved are lives we thought are wii had gone to console heaven and now it back.☺️
Your a TH-cam legend. You have a voice that I recognize. Maybe the count from Sesame Street? I don't know, but very familiar. Thank you!
My dad said Thank you.👍
Thank you so much for this video, I haven't played on my wii for years and this was the reason I couldn't get it to work. But your tips worked AHHH!!!! You truly made my day!!!!!!!
Thank you for saving my relationship. :) you a real one
Thanks that did the trick. Now to Resident Evil 4 yessssssssxs
My wii remote is connected but I don’t get that ‘hand’ that lets me natigate around. My home button works and I can use the + and - to move to next screen but no hand to navigate around ???
The motion sensor bar: the long thin strip sensor bar (about 30cm long) with a thin wire! Connect it to your Wii and place it on top of your TV (or similar position so that your remotes can SEE it). Hope then you CAN play ;=)
My batteries are on the battery cover. What do I do?
Yes I know I’m saying this in 2020
hi, no problem. You can remove your back cover, then find two AA batteries and place them in the remote control, now you can do the same as shown in the video. Have a good day!
@@RepairDIY thanks bro, this worked well!
@@Thefireflied Great! :=)
Help me I did it and it didn’t work pls help
@@xavierzty8713 I found the proper way, there’s a little hole with the red button in the bottom, get a paper clip or something and press it down
Thanks so much, now I can finally play Mario Kart Wii 2 player!
Thank you
Thanks
Thanks.
It's on but the little hands are not there
the little will only appears and moves if only you have the positioning bar(a foot long bar, normally place on top of TV) is placed and connected! check that and good luck!
Nailed it, your voice is relaxing
You just saved our day!!!!!
Yeah Now I can use My Wii IN 2022!
Thanks Dave 😘😘😘😘😘
Very helpful
You saved my dayyyyy
You’re the rucking goated
Thank you very helpful
Thank you ❤❤❤❤
Thank you so much 😊😊
Way to make a 30 second video last forever
Thank you!
Thanks I had forgotten how thanks 🙏
Lets goooooo thanks so much🙏
it worked omg thank you
Thank you it definitely worked!
That is not working..
What can the problem be?
hi, you could try again. 1. make sure the wii console is on and you can see the picture on your TV. 2. put two good batteries into the remote and make sure that when you press any button, the four leds at the bottom of the remote flash. 3. Press the red buttton on the console and then press the red button on the remote. This method should work or may be some other issues. Good luck!
@@RepairDIY m n n bc high lpg c b I did
Tysm dude
Sub to this guy,literally he saved all our lives!
Tysm this helped a loot😗
Thank you soo much
without sensor bar the wiimote will it work yes or no pls reply
Without the sensor bar, the remotes can still connect to Wii console and switch it on/off, however the cursor on the TV screen will not move so that you won't be able to really control your game or play. Have a good day!
Great, it worked! 👌
THANKS SO MUCH!
Thank you so much :D
Thank you big daddy love you ❤
THANK YOU SO MUCH
Thank u!
gracias
100000000 dank ❤
Thanks man ❤❤❤❤❤❤❤❤❤❤❤❤
The arrow doesnt show pumpning our tv. Any tips?
No arrow shown problem is normally due to the positioning sensor: it is a long bar and normally placed on top of your TV. Check your sensor bar. Good luck!
You are amazing, thank you 😊
Thank you worked for me too😂
thank you so much dude
You are the best
I my blue light on the weak connection I what am I doing wrong??
hi, you could try again. 1. make sure the wii console is on and you can see the picture on your TV. 2. put two good batteries into the remote and make sure that when you press any button, the four leds at the bottom of the remote flash. 3. Press the red buttton on the console and then press the red button on the remote. This method should work or may be some other issues. Good luck!
It worked thank you so much!!!
You rock bro 😊
I’ve done this so many times but nothing happens.
My remote turns on perfectly and lights up but when I click any button the TV doesn’t do what the remote is doing. So if I click A it doesn’t select anything on the tv. I don’t understand what’s wrong :((((((((
hi, if you can a steady led light on your remote, it means that you have connected your remote to your Wii. If you can see the cursor on your tv screen, it means that you have connected successfully. you could check if your remote receiver strip on the top of your tv is connected and positioned right? or try another remote from your friend! good luck!
what a remote receiver strip??
@@pepprrr_cl16 it is a long (30cm ?) stripe with a thin wire connected to Wii console, for the movement detection of the remotes. It should be placed on the top of a TV. Good luck!
Yessss it worked I just totally forgot about the sensor thing
There's a million videos showing how to connect one controller, but none if the second won't connect.
Works for me thanks dude
What I Do when this method didn't working on My remote and console
hi, you could try again. 1. make sure the wii console is on and you can see the picture on your TV. 2. put two good batteries into the remote and make sure that when you press any button, the four leds at the bottom of the remote flash. 3. Press the red buttton on the console and then press the red button on the remote. This method should work or may be some other issues. Good luck!
This worked for me!! Thank you!!
It says it's connected but I can't see it on my screen.
The motion sensor bar: the long thin strip sensor bar (about 30cm long) with a thin wire! Connect it to your Wii and place it on top of your TV (or similar position so that your remotes can SEE it). Hope then you CAN play ;=)
Thx
It does not show how to connect the second remote.
use the same method to connect more remote controllers. have a nice day!
It works!!!
i love you
I have 2 remotes. One is from another wii and one is from my wii. In the past i syncronized both of the controllers and they worked just fine. Now they wont sync WHATEVER i do. The blue lights wont flash either. What should i do??????
hi, press any button: if no blue light at all, check your battery; if blue light flashing, it means not connected; if one blue light and no flashing, it means the remote has been connected. also make sure the motion detection bar on your TV is properly connected and positioned. good luck!
doesn't work for mine, plus I have a battery pack in my controllers, not AA's
Hi, a battery pack or new AA batteries should be ok. in any case, make sure your remote is fast flashing when pressed a button. good luck!
I have 3 remotes and none of them flash blue and the sync buttons didnt do anything. The controllers used to work but now it doesnt
try a new set of batteries?
Mine still wont
Hi, If you know a friend who has a wii, you could test your remote with their wii or test your wii with their remote. Good luck!
I have this problem and everyone says that i need to re-sync my wi remote. I pressed the sync button on wii remote and the lights blink but when i press sync on console the lights still blink and nothing happens. I have 3 wii remotes and all of them worked yesterday but suddenly today none of them work.
Hi, you could check if the green power LED on the console is ON, before you press the red button on the console. Good luck!
@@RepairDIY yes of course the console was on.
@@MTCTpl As I understand the console and/or the remotes should remember each other forever even the power is disconnected from the console or the remotes run out of batteries, unless the remotes have been connected to another console. You could try to unplug the console and remove the batteries from the remotes, then try again. It that not working, I am really running out of ideas! Good luck!
@@RepairDIY Yes it's working. I was starting to worry there's something wrong with my wii.
dude it needs sensor bar or not
I have 2 remotes and everytime I reconnect my second one my first one disconnects
hi, it sounds like a possible problem with the console. you could restart the console by unplugging it from power supply, wait for one or two minutes, then plugging it in. good luck!
thank you so much!!!! I hope to meet you at the gates of heaven 💓😘😚❤️💘💜
Just should of bought me a hole new one I had this Wii for the longest time and bought me new remotes n now it’s taken a crap bc of these damn remotes
It’s not working for me, It might be because it’s 7 years old but it won’t turn on. Any ideas?
if your remote not turned on, you could try to clean the battery contact points and then use a new set of batteries to see if it works. good luck!
@@RepairDIY ok thank you!
My sensor isn't working for the controller should I get a new one
hi, how do you know your sensor is not working? They are normally good quality and reliable? I think it should be wireless signal between the remote and the console, and it should be infrared light signal between the remote and the motion bar. The infrared light signal is not visible even it is working. you may see the infrared signal light by using your mobile phone camera or a camcorder depending on the ability of the cameras. You could try with a pair of new batteries? it seems not cheaper to buy a second hand remote, could be £20? Have a good day!
@@RepairDIY idk it's old just got it out the closet haven't played in years
@@b1uestars470 it may still work well. Good luck!
@@RepairDIY it some times does at very weird angles and it's annoying
@@b1uestars470 hi, another idea: you could borrow a remote controller from a friend and try if that remote controller works fine? Or take your remote controller to a friend house and try it on their WII console? By doing that you can be sure if the problem is with the remote controller or the receiver. Have a good day!
❤❤❤❤❤❤❤❤
I tried this way many times but it didn't work 😕
could you provide more details so that someone may be able to help you?
@@RepairDIY The remote lights up but does not connect to the wii
@@LFC82 you could try(1) the batteries in the remote are good so that at least three LEDs flashes? (2) you could try or borrow another remote to try? Have a nice day!
@@RepairDIY The lights are all on, but I took him to a repairman.
Go to heaven
Dosen,t work
Doesn't work or broken remote
Thank you buddy you have saved are lives we thought are wii had gone to console heaven and now it back.☺️
Thank you!
Thank you
Thanks
Thank you
Thanks man