I did it all All I get is blank 16 cursors on the first line. Code clears them and then restarts them when the code should show other messages instead. It looks like it is running the different codes, but only one line lights up Are there any other suggestions?
First check your connection, if the pins are connected properly and if it was not exchanged. If all pins are connected properly with power pin, then most probably the i2c module are damaged.
Finally my lcd is working, i thought it was brocken, then i bought another, now i have 2 lcds!, that are working, thanks bro!
Thank You So Much
thanks so much
I did it all
All I get is blank 16 cursors on the first line.
Code clears them and then restarts them when the code should show other messages instead.
It looks like it is running the different codes, but only one line lights up
Are there any other suggestions?
Thank you so much❤
Thanks bro
Help. No Device found
What to do if the scanning say i2c not found
First check your connection, if the pins are connected properly and if it was not exchanged.
If all pins are connected properly with power pin, then most probably the i2c module are damaged.
Not working