Installing Hyline Inner Fenders On My Jeep Wrangler
ฝัง
- เผยแพร่เมื่อ 9 ก.ค. 2024
- It was time to get rid of my Rattling, loose, and cheaply designed DV8 inner fenders and replace with them with a higher quality set. I decided to get a set from Hyline Offroad, they make great products, all made here in the USA.
These are designed to fit the Jeep Wrangler JK, and they also make sets for other models.
www.hylineoffroad.com/jeep_pa...
They are available at multiple retailers for a lower price .
Inner fenders are almost a mandatory upgrade after switching to aftermarket fender flares. The factory plastic liners become flimsy, and sometimes even rip off. Yes I know these Hyline liners are a little pricey, but they are worth it.
I no longer have to worry about my tires contacting my inner fenders during flex. These also allow you to fit multiple aftermarket shock options, including the Teraflex Falcon shocks.
I hope you enjoyed the video, please make sure to give it a thumbs up and subscribe!
Stay tuned for more videos! Next up, it’s time to test out the Gladiator with 35s. - ยานยนต์และพาหนะ
I hope everyone has a great weekend! What’s your next Jeep project or trip?!
Installing my rock sliders this weekend. ordering new fenders this upcoming week. Been adding little things over the last 2 weeks iv owned my JKU. I am guessing your in VA what part?
I’m up north of Yorktown
Headed to jeep invasion at the smokey mountains with some friends at the end of August.
Trail Hero, Hump & Bump.... Upgrades junk yard tons on 2017 JKUR
@@JKGearandGadgets Nice im in Newport news, didnt know you were that close to me. Would be cool to meet ya in person
That looks awesome!!!!
Next Monday I’ll buy my first Jeep Wrangler, it’s a 98 TJ, 180,000miles
Never heard of highline offroad before and i will 100% be checking them out now looks awesome!!!!
Had my hyline inners for 2 months now and love them. Gave me room for 35s with no lift....for now ;) Enjoy watching your vids man.
I installed my front rock lights behind the mesh insert. Cool look at night.
I’ve seen that a few times. Good look!
I did these a couple months back replacing my Artec’s. Soooo much better.
Thorough , easy going, and full of great install and product videos.
if you put that LED rock light in the front wheel well on the front top spring perch, you could point it forward and get some good light right in front of your tires. There's a nice flat spot there and you won't have to worry about the tire contacting it.
Great vids. Love how you clean the tires when showing the new fenders. Thanx for vids.
They look Awesome and HD I have a jk like yours and ready to upgrade my fenders and lines soon love your videos. Keep them up!
Great upgrade from the DV8s
I made the exact same liner change. The DV8’s rattle and just not a tight fit. The Hylines are an excellent fit.
You need a shop for those winter days that are coming. Great video by the way. Keep them coming.
Ordering these now. They look great and are functional. I held out before now on getting inner liners as i felt they were just for looks and some were way to flashy.
oooh, those look nice, but I am pumped for the long arm series!!!!
Looks great 👍🏻
Those look great
I have those on my 07 JKUR with front coilovers. I love them. Took some minor trimming here and there but nothing too difficult.
I personally appreciate a nice little box and can see why you went for it.
Nice vid Ben. I also have the HyLine vented hood & say that it definitely works, it’s not just for astetics!!! Besides, gotta support a local PA company. I just got Fox shocks, MetalCloak control arms & Adams driveshafts installed this week. Weather permitting I will be at Rausch Creek in a few weeks & cannot wait to see how my girl handles. Enjoy your weekend brah 🤙🏾🤙🏾🤙🏾🤙🏾🤙🏾
Very nice!! Been looking at doing some myself. Will have to check them out. I'm heading up to Rausch Creek Friday. Got some Buddies from here in Central NC going and meeting some guys from NY as well.
I like the video, on my 08 JK I went with the Rough Country brand and love them. I would suggest Uwaharrie for the run..... see you there.
Diplo at 5:34. Good stuff Ben!
Love the video man
Thanks 🤘
Thanks! Look good. I am buying a set.
Having the same issues with my Dv8 inner fenders also too much rattle! Gonna look into getting these, they look really nice! Thanks for another great video and another dent in the wallet!
JDS JK definitely have the same problem with my tj
Nice little box! 😆
5/16 stainless steel self tapping screws are the best for raddling noises.
You can put the rock lights behind the mesh part of the inter liners
Awesome 👏👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
What I did at work for someone’s was spotweld the bottom piece where the hook always comes undone
Good thing about jeeps
Ben: we’re getting ready to go out to eat
Daughter: imma drive through this puddle with my white shoes first
Every... single... time 🤦🏻♂️
I like a nice little box 😂😂
I'll have to keep an eye out for you at Raush Creek this weekend! If all goes well I'll be there with a few friends!
Well, it looks like I won’t be going to Rausch anymore. Maybe I’ll catch you there another time!
@@JKGearandGadgets Me either actually, we are going to Bald Eagle state park now
Low key bomb there at the end.😂
That is my big dilemma right now with these Falcons 3.3 I’m really big on how the inners mold inside and have been looking and researching ..good video Ben 👍🏼
i think these and the JCR inners are your best options. There are some others that fit with some trimming, but i wouldnt want to trim something that i just bought
Did they give you a coupon code for your followers by chance? Considering purchasing both the inner fenders and the hood louvre due to your videos specifically. THX! :-)
How are these inner flares handling? I have had something similar to those dv8 ones you had and the passenger side sheared off at one of the bends from the sway bar link bolt hitting it since the ones I have are not very well tucked in. Thinking about Nemesis off-road that are similar to those that you installed. Because I have the Teraflex Falcon shocks though it recommends taking the shocks off because of the reservoir.
I think 4 people from DV8 disliked your video, hahaha
Planning on selling the old DV8 ones? i don't mind a bit of rattling and trimming my stock ones didn't go so well.
Might not be the long arm vid that everyone's waiting on but don't down play inner fender install either. I personally would make it a priority to get that air bump stealing, DV8 trash off my rig.
Can you do a power steering gearbox replacement video. I have been trying to find one alike to no avail. And forums are terrible.
Until I get some inner fenders, I just took my factory plastic ones, trimmed them to fit my new flat fenders, and reinstalled them with the help of some zip ties :)
What are your plans for the old DV8
Does it bug you sometimes not getting a complete set of something? I.E. matching front and rear inner fenders?
This is the first video with your new turn signals, where did you get them?!?! I’ve never seen them!
They are the jw speaker trail 6 lights
Are those the mce fenders or did you change them up?
Hey what do you guys think about running inner fenders raw. No paint. Is it too much work to maintain and they'll look like crap after a short period? thx
What kind of fenders are those ?
are you from PA ? I am about an hour drive from RC
Awesome video mate, they look awesome, wonder if they do some they would fit my tj?
They do make a TJ version, but they look different
JK Gear and Gadgets interesting, how different is it? Thanks
Cheap Jeeper Sorry, we only make them for the JK’s.
Hyline Offroad sorry! I could have sworn I’ve seen a Tj inner fender from you before.
Yep I’m wrong 😂. Just went and looked
Product link?
🤙
Def picking these up next. Are rear liners even necessary?
Nah
JK Gear and Gadgets roger that
Did you use existing holes for bolts that go in to nutserts or did you have to drill? .. on min 8:00
Existing holes
Have to ask.... I have purchased the same inner fender liners and Metalcloak Overland front and rear fender flares. Do you know if these will work together ?? Not a lot of information on this.
Thanks !!
From Spring Hill Tennessee
I don’t see why they wouldn’t!
Ive been watching all your you tube vids on 1 ton axle swap. Out of curiosity what engine mods have you done to your jk?
None really.
@@JKGearandGadgets i was just curious how the power was rolling them 1 tons and tires. Im planning on a hemi swap next year and was just curious as to wether rhis swap would work with my swap
you will be perfectly fine with a hemi. im running the 3.8... probably putting 100hp to the ground lol. if your going with a hemi then no need for 5.38 gears
So, are thos vision wheels for the Gladiator?
Yep!
I have been worried about the side vents near the intake. I’m planning on taking my Jeep through mud and water, has anyone or have you heard of water getting to the air intake?
I’ve known plenty of people who sucked water in and destroyed the engine. Just don’t go splashing through water fast, go slow
Those look great. Are going to do rear inners too?
North Carolina please I’m 4 hours away 😂
Ben they work with falcon shocks 3.3?
Yep! Just have to install the inner fender first, then the shock.
Thank you sir!
Hey what camera are you using?
amzn.to/31RKxXi
Gopro7 Black,
It is amazing, i shoot in 2.7k 60FPS with hypersmooth stabilization. It has the option for 4K, but it takes longer to edit the videos. 2.7k is easy to edit and still is extremely high quality. This is by far the best GoPro ever made. The only issue is battery’s overheating. So I bought a 3 pack on amazon (knock off brand), and change them out about every 30 minutes of filming to prevent overheat on hot days. Would highly recommend it as a camera for filming videos and Offroad action.
How good are the shocks you have now?
They are decent. Honestly I would look at something different though. They are good for Offroad since they do have a good amount of travel, but the ride isn’t the best
Peffferated! Hahaha made me laugh!
@3:05 ...that’s what he said
Can I buy your old ones from you???
LS/6L80 SWAP...
So after having these a while do they rattle at all?
Mine haven’t rattled at all
@@JKGearandGadgets great! I plan on buying a set soon!
Do those come in pairs or is that price each ?
Pair
@@JKGearandGadgets thank you for your quick response sir...love your builds
Can I buy the dv8 ones off of you?
Shoot me a message on IG
What kind of fender flares do you have?
MCE
JK Gear and Gadgets do they have different widths? Yours looks slimmer then the ones I seen
Are these the black powdered coated ones?
Yes!
JK Gear and Gadgets ok thank you! I am trying to decide between these and the dv8
JRS Productions the Dv8s suck; that’s what I just pulled off
Just don’t know if I can do that amount.
Can I have one of those license plates pleaseeee?
Shoot me a message on Instagram
Wanna help a jeeper our and send me the old ones?😎💪🏽
I’m here to serve some poopoo
Wat..
Ace inner. One piece. Less hardware to come lose
Pefrated? Perforated lol just being a word nazi great video Ben!
Your hand is annoying me 😂
👋
What kind of fenders are those ??
MCE narrows