Does this harness work with the factory gouges, I want everything to work just like it came from the factory. Thank you very much for the help and feedback. Greatly appreciated.
Im tryin to put my 5.7 vortec and traninto my 72 c20. Can the harness be modified to remove 02 sensors? My 72 c20 is an ac cab. What could we do to the harness to make it see irk for my truck?
Can sum1 tell me if I can take a 5.7l vortec out of 96 tahoe with the 5 plug ecm and put it my 98 z71 with the z71 wiring harness that is set up for the 4 plug ecm ??
I’m wanting to do this to my 1999 Chevrolet K2500 . I have the L96 that I’m going to put in. I’ve already removed the L31 vortec and I have my own 411ecm and HPtuners. I have built a few stand alone harnesses but I’m not up for this one that is why I want you to message me back with price. Thanks Mark W.
I have a 99 obs Chevy tahoe 4x4 4L60E im about to do a ls swap 5.3 drive by cable I want to keep the 4x4 air conditioning cruse control how much donyou charge for a wire harness for that was going to do it myself but I seen this video and wanted to check your price thanks
We need to get a little bit more information about your setup. Please give us a call Mon-Fri 9am-6pmCST 817-659-9305 We will get you a quote in just a couple minutes!
Rolling Dead Auto I have 1992 GMC Sierra OBS and have a 2007 chevy truck engine it's a 6.0 with a 4L80E trans do yo make a integration harnesses for my OBS?
Hello have 2001 chevy blazer and donor 6.0 escalade and have computer and drive by wire and pedal. How do i go about getting a harness that u are offering
So the big thing here is, you do t tell anyone where they can go to purchase a harness!! Do you need a harness/harnesses to integrate or do you have them available for purchase off the shelf? Your doing exactly what I have been looking for, as well as others from the postings. Just need more info to be able to order bro!!
Rolling Dead Auto is easy to find. You can find us on google, yelp, facebook, etc.. Our contact information is on google as well as our website! We are happy to help you with your harness needs! Please give us a call during business hours Mon-Fri 9am-6pm Central time. 817-659-9305 We do require both harnesses for integration.
Hi friends!! I want to know if you can help me with this... I'm putting an old 5.7 SB to my 96 GMC Sierra 4.3 L. I will go with FiTech Carb system with a Single Turbo set up, so I dont need all the stuff of my hardness. I only want A/C, Alternator, Starter, ABS, water temp, oil pressure, fuel system, fuel level, ignition coil, fuse box, etc...No more sensors because the FITECH its an stand alone. Can you do that if I send you my hardness? Hope we can deal...
What are you going to use to control your transmission? You need the pcm, and the TPS and speed signal to the computer to control the electronic transmission.
I have a 97 c1500 and I'm doing a v6 to v8 swap (4.3-5.7vortec) I would like to keep the original manual trans (nv3500) can you integrate the harness from the 5.7 to work with my manual trans?
What you will need is known as a stand alone vortec swap harness. Not an integration. Check out PSICONVERSIONS.COM To see if they have a vortec 5.7 stand alone option for you. We don't do the 5.7 stand alone harnesses unfortunately.
Hello there do u still do harness i was trying to see if you do one for a 1995 obs with the 5.3 from a 2001 chevy red blue conector and how much am i looking to pay
We do offer a harness rework for your 95. It is a stand alone Ls setup. But your stock 95 engine harness will need to be reworked to remove all stock engine controls. Call us after 9:30am CST to get you a quote. We have a few questions for you before we can get you a price!
Cuz i had one made and it was working good but send my 95 harness is old i think it got a short or some cuz its not giving no power to my lights or engine no power at all thats why i am looking to get a new one that i can just plug and play and will work with everything
I just did a motor swap for the first time and im sawpping it to a v6 with th 4l60e and im lost when it come to putting it back in, i have the pcm and fuse box and all that in the right spot but the other small clips all look alike to me, do you have a video or a piture labeling the clips to the v6 wiring harness and where exactly they go?
Yes we are in business! We take several calls everyday about our harnesses!! Rolling Dead Auto 5021 Saunders Rd. Suite104 Fort Worth TX, 76119 817-659-9305
Give us a call to discuss your options! A quick Google search will get you directly to our contact info! Rolling Dead Auto 5021 Saunders Rd. Suite104 Fort Worth Tx, 76119 817-659-9305 Mon-Fri 9am-6pm CST
A quick google search will get you our contact information, address. Etc.. Rolling Dead Auto 5021 Saunders Rd. Suite104 Fort Worth Tx, 76119 817-659-9305 Give us a call to get your quote! Mon-Fri 9am-6pm CST
So are these harnesses only to be used on a ls swapped 5.7? If so why not use the ls harness? Because itd incompatible with stock 5.7 pcm? Sorry I'm a little confused
The Ls harness is used as well as the 5.7 harness. They are integrated into one using the Ls pcm. We use the stock 5.7 fuse block to power everything as normal!
The cost depends on several variables. Such as DBC or DBW, or TAC module integration, Electric fans, 3 wire temp sensor option, transmission options, loom options, A/C, condition of existing harness, etc.. We would be glad to answer any questions that you may have to help get you a quote for your setup!!
@@dannylopez6782 Rolling Dead Auto 5021 Saumders Rd. Suite104 Fort Worth Tx, 76119 817-659-9305 Rolling Dead Auto can be found on google, yelp, facebook, our website, etc..!!
Prices depend on options such as electric fans, dbc or dbw, pcm tuning requirements, etc.. Please call us to get you a quote! Rolling Dead Auto 817-659-9305
Hey how can I get in contact with you? Need to ask you a few questions about the gen4 setup and may need you to do some work for me with my stand alone harness. Thanks
A quick google search will find our contact information! Rolling Dead Auto 5021 Saunders Rd. Suite104 Fort Worth Tx, 76119 817-659-9305 Mon-Fri 9am-6pm CST
Are you out of business? I just haven’t heard back from you since 4 months ago. Message me back to let me know if I need to get it done somewhere else. Thanks
We are not out of business. We are still making harnesses! It can be difficult to get back to everyone, we recieve a high number of calls and requests for quotes. I will be glad to help you!
Good afternoon guys, I’m looking to do a swap in a 99 Chevy Tahoe and I was wondering where I can purchase a wiring harness that’s already configured from my vehicle. Please leave me your contact info or a phone number where you can be Reach because I am very interested in getting this wire harness
A quick google search will get you right over to us! Rolling Dead Auto 5021 Saunders Rd. Suite104 Fort Worth Tx, 76119 817-659-9305 Rollingdeadauto@yahoo.com
We do make a harness for you! It would not be an integration with the 92, but we make a really nice standalone to swap in your 07 6.0 LS engine and 4l80e transmission. If you would like to give us a call to get you a quote! Rolling Dead Auto 817-659-9305
This is sweet,looks legit and the way it suppose to be done.
Appreciate that!!
Does this harness work with the factory gouges, I want everything to work just like it came from the factory. Thank you very much for the help and feedback. Greatly appreciated.
Yes it does!
Im tryin to put my 5.7 vortec and traninto my 72 c20. Can the harness be modified to remove 02 sensors? My 72 c20 is an ac cab. What could we do to the harness to make it see irk for my truck?
The question I have is why do you have to delete these wires
I was wondering what is the firewall harness that you touch on 0:48 I wanted to know what that is for
That specific one is for AC/Blower Controls
I’ll be in touch soon.
How much does this cost and where do I send my wire harness I have a 97 Tahoe with the 5.7 and want to put a 5.3 6.0 in it
Prices vary depending on options. We Custom build these!! Give us a call anytime to get you a quote! Rolling Dead Auto 817-659-9305
I wish I could afford a job like t that!!
Can you merge my PSI harness with the original harness it's a LS swap
Can sum1 tell me if I can take a 5.7l vortec out of 96 tahoe with the 5 plug ecm and put it my 98 z71 with the z71 wiring harness that is set up for the 4 plug ecm ??
Do you do a merge on 97 obs v6 harness to 6.0. I’m doing a swap.
Yes we do! Give us a call to discuss your options!
I need a wiring for an 89 Chevy truck 5.7 to put a LS 5.3 how much does it cost??
Please give us a call to get you a quote!
Rolling Dead Auto..
@@rollingdeadauto1387 can you send me your number
@@rollingdeadauto1387 or how can I contact you??
Quick Google search would get you all of our contact information.
Rolling Dead Auto
5021 Saunders Rd. Suite104
Fort Worth Tx, 76119
817-659-9305
I’m wanting to do this to my 1999 Chevrolet K2500 . I have the L96 that I’m going to put in. I’ve already removed the L31 vortec and I have my own 411ecm and HPtuners. I have built a few stand alone harnesses but I’m not up for this one that is why I want you to message me back with price. Thanks Mark W.
We need to discuss some options to get you dialed on the quote!
Rolling Dead Auto
817-659-9305
I have a 99 obs Chevy tahoe 4x4 4L60E im about to do a ls swap 5.3 drive by cable I want to keep the 4x4 air conditioning cruse control how much donyou charge for a wire harness for that was going to do it myself but I seen this video and wanted to check your price thanks
We need to get a little bit more information about your setup.
Please give us a call Mon-Fri 9am-6pmCST 817-659-9305
We will get you a quote in just a couple minutes!
Hello would that work with my 1998 2 door tahoe and will the Ac works ?
Yes it will work with your 98 tahoe and will have the ac intact.
I have the same truck, and want to do the same thing.. nice to see others have good taste!👌
Rolling Dead Auto I have 1992 GMC Sierra OBS and have a 2007 chevy truck engine it's a 6.0 with a 4L80E trans do yo make a integration harnesses for my OBS?
Do you integrate into the 95 c1500? Or would it be standalone?
If you have the vortec/spider injection we can integrate! If it is TBI then you would want to use a standalone.
Hello have 2001 chevy blazer and donor 6.0 escalade and have computer and drive by wire and pedal. How do i go about getting a harness that u are offering
Just give us a call MON-FRI 9am-6pm CST Rolling Dead Auto 817-659-9305
I am doing a 5.3 swap on a 01 blazer 2wd with a 4L60E trans I'm at a complete loss how to make my gauges work do you make the harness for that
We would need your 01 harness and your Ls harness. But yes we can make one for you. Give us a call after 10am and we can get you a quote! 817-659-9305
@@rollingdeadauto1387 thank you so much
Price for one of thoses for a 98 chevy truck?
I have a 92 gmc 4.3 nv4500 4x4 I would like to keep my transmission and transfer case would u make a harness for that
You will need to buy a stand alone harness. Such as PSI Conversions harness. We do not integrate these.
I need a harness for a 99 Tahoe I’m putting a 6.0 4x4
Give Us A Call!!! We will get you a qutoe! Rolling Dead Auto 817-659-9305
So the big thing here is, you do t tell anyone where they can go to purchase a harness!! Do you need a harness/harnesses to integrate or do you have them available for purchase off the shelf? Your doing exactly what I have been looking for, as well as others from the postings. Just need more info to be able to order bro!!
Rolling Dead Auto is easy to find. You can find us on google, yelp, facebook, etc.. Our contact information is on google as well as our website! We are happy to help you with your harness needs! Please give us a call during business hours Mon-Fri 9am-6pm Central time. 817-659-9305
We do require both harnesses for integration.
Would you be able to make a harness to drop a 5.7 vortec into a 85 c10 with the spider injection
Yes if you have the factory 5.7 Harness! Give us a call to discuss options!
Rolling Dead Auto
817-659-9305
Hi friends!!
I want to know if you can help me with this... I'm putting an old 5.7 SB to my 96 GMC Sierra 4.3 L. I will go with FiTech Carb system with a Single Turbo set up, so I dont need all the stuff of my hardness. I only want A/C, Alternator, Starter, ABS, water temp, oil pressure, fuel system, fuel level, ignition coil, fuse box, etc...No more sensors because the FITECH its an stand alone.
Can you do that if I send you my hardness? Hope we can deal...
What are you going to use to control your transmission? You need the pcm, and the TPS and speed signal to the computer to control the electronic transmission.
I have a 97 c1500 and I'm doing a v6 to v8 swap (4.3-5.7vortec) I would like to keep the original manual trans (nv3500) can you integrate the harness from the 5.7 to work with my manual trans?
Yes we can! Give us a call to discuss your options!
Hi, Nice work, Im need to integrated Vortec 5.7 99 wiring in old 74 K5 Truck, can you help me with that ? Im from Argentina. Many Thanks
What you will need is known as a stand alone vortec swap harness. Not an integration.
Check out PSICONVERSIONS.COM
To see if they have a vortec 5.7 stand alone option for you. We don't do the 5.7 stand alone harnesses unfortunately.
What about 95’s? Is it the same?
95 is a split year. If you are TBI then you would use a stand alone harness.
Can you build me one to swap a 92 6.5 turbo diesel and 4l80e into a 99 suburban?
unfortunately not. We are only offering gasoline harness procedures.
Would you be able to do it if i get an 03 ls 5.3
Yes!
Hi I have a 1996 gmc want to do a. 411 pcm swap only do you sale a set up for that ? Wire harness pcm kit ?
Yes we do, we would get you a 411 pcm, modify your harness to pinout for 411, tune the 411 pcm for $850
My harness. Were are you guys located
5021 Saunders Rd. Suite104
Fort Worth Tx, 76119
Rolling Dead Auto Your in tx
Would I have to remove my harness and ship it to you ? I’m in California.
I'm in the process of swapping my 97 z71 I'm needing a little help with the wiring I have a complete donor vehicle
We can help. We can do an integration for you!
How could I send my harnesses to be intergrated ?
You can send it Ups, fed ex, usps..
We are backed up 30-33 weeks on current harness orders.
How can I get a harness like that for my 98 Tahoe
Give us a call to get you setup!
Rolling Dead Auto
817-659-9305
Hello there do u still do harness i was trying to see if you do one for a 1995 obs with the 5.3 from a 2001 chevy red blue conector and how much am i looking to pay
We do offer a harness rework for your 95. It is a stand alone Ls setup. But your stock 95 engine harness will need to be reworked to remove all stock engine controls. Call us after 9:30am CST to get you a quote.
We have a few questions for you before we can get you a price!
Rolling Dead Auto
5021 Saunders Rd. Suite104
Fort Worth Tx, 76119
817-659-9305
What i was planing on doing is buying a new one that will work with my stock 95 dash and reverse lights
Cuz i had one made and it was working good but send my 95 harness is old i think it got a short or some cuz its not giving no power to my lights or engine no power at all thats why i am looking to get a new one that i can just plug and play and will work with everything
We don't supply the stock truck harness. You may want to try a salvage yard for a lighting and chassis harness to start with.
I just did a motor swap for the first time and im sawpping it to a v6 with th 4l60e and im lost when it come to putting it back in, i have the pcm and fuse box and all that in the right spot but the other small clips all look alike to me, do you have a video or a piture labeling the clips to the v6 wiring harness and where exactly they go?
Hey guys are you still in business ive been trying to get a hold of yall and had no luck
Yes we are in business! We take several calls everyday about our harnesses!!
Rolling Dead Auto
5021 Saunders Rd. Suite104
Fort Worth TX, 76119
817-659-9305
if your having trouble what chance do i have
We had to test our ac circuit on the DBW 03-07 pcm. Went well! This was a while back...
How do I get a harness built by you guys?
Give us a call to discuss your options! A quick Google search will get you directly to our contact info!
Rolling Dead Auto
5021 Saunders Rd. Suite104
Fort Worth Tx, 76119
817-659-9305
Mon-Fri 9am-6pm CST
Can you also do dbc? Also can I provide you with a standalone psi harness or similar. Can you marry to obs harness?
How much for the integrated harness, how do I order or where do I send harness to?
A quick google search will get you our contact information, address. Etc..
Rolling Dead Auto
5021 Saunders Rd. Suite104
Fort Worth Tx, 76119
817-659-9305
Give us a call to get your quote! Mon-Fri 9am-6pm CST
So are these harnesses only to be used on a ls swapped 5.7? If so why not use the ls harness? Because itd incompatible with stock 5.7 pcm?
Sorry I'm a little confused
The Ls harness is used as well as the 5.7 harness. They are integrated into one using the Ls pcm. We use the stock 5.7 fuse block to power everything as normal!
How much can we call on Saturdays that's the only time I can call I work mom thru Fri
Yes you can can call us on Saturdays!
I have 99 gmc $ for a harness
Give us a call to discuss your options.
Mon-Fri 9am-6pm
Rolling Dead Auto
817-659-9305
What is the cost of these integrated harnesses? Thank you
The cost depends on several variables. Such as DBC or DBW, or TAC module integration, Electric fans, 3 wire temp sensor option, transmission options, loom options, A/C, condition of existing harness, etc..
We would be glad to answer any questions that you may have to help get you a quote for your setup!!
Yes I'm doing a Ls swap on my 1997 k1500 4x4 I been looking for a harness for my project can you plz help me out
@@rollingdeadauto1387 how do we getin contact with you and do you flash ecms also
@@dannylopez6782 Rolling Dead Auto
5021 Saumders Rd. Suite104
Fort Worth Tx, 76119
817-659-9305
Rolling Dead Auto can be found on google, yelp, facebook, our website, etc..!!
@@dannylopez6782 we do flash LS pcms!
Do u sell this harness
Matt
Well sell reworks for your harness. We use your 2 harnesses to make into 1
How much for a harness
How much is this service?
Prices depend on options such as electric fans, dbc or dbw, pcm tuning requirements, etc.. Please call us to get you a quote! Rolling Dead Auto 817-659-9305
How do I contact you all
Rolling Dead Auto
817-659-9305
Hey how can I get in contact with you? Need to ask you a few questions about the gen4 setup and may need you to do some work for me with my stand alone harness. Thanks
A quick google search will find our contact information!
Rolling Dead Auto
5021 Saunders Rd. Suite104
Fort Worth Tx, 76119
817-659-9305
Mon-Fri 9am-6pm CST
Where can I order or purchase a harness
Give us a call at 817-659-9305 from 9-6 mon-fri. We can get some information and get you taken care of!
Were can i oder one and for how much
Call us directly Mon-Fri 9am-6pm
Rolling Dead Auto
817-659-9305
Prices depend on your setup, give us a call to get you a quote!
Rolling Dead Auto im not in the state how can i reach you ?
99 Chevy suburban drive-by cable
Are you out of business? I just haven’t heard back from you since 4 months ago. Message me back to let me know if I need to get it done somewhere else. Thanks
We are not out of business. We are still making harnesses! It can be difficult to get back to everyone, we recieve a high number of calls and requests for quotes. I will be glad to help you!
Good afternoon guys,
I’m looking to do a swap in a 99 Chevy Tahoe and I was wondering where I can purchase a wiring harness that’s already configured from my vehicle. Please leave me your contact info or a phone number where you can be Reach because I am very interested in getting this wire harness
Rolling Dead Auto
5021 Saunders Rd. Suite104
Fort Worth Tx, 76119
817-659-9305
Thx for the info I’ll call you seen thx again
Whats the contact info
A quick google search will get you right over to us!
Rolling Dead Auto
5021 Saunders Rd. Suite104
Fort Worth Tx, 76119
817-659-9305
Rollingdeadauto@yahoo.com
We do make a harness for you! It would not be an integration with the 92, but we make a really nice standalone to swap in your 07 6.0 LS engine and 4l80e transmission. If you would like to give us a call to get you a quote!
Rolling Dead Auto 817-659-9305
do you have an email address
rollingdeadauto@yahoo.com
How much for that set up
There are several factors that affect pricing. But average cost is $1200 for integration.