Your steer pump is shared with hyds so if you have all other functions but steering is not working your issue lies in the combination valve on side of pump. You have a small piece of debris( most likely rubber) stuck in the orifice of the priority spool in the combination valve( spool sits behind the relief u were playing with). Put finngers in and remove priority spool, put in vice remove grub screw type orifices in each end and clean out with brake clean. Dont just poke out the debris without removing orifices as the debris will just jam up steering again. All up takes around 1/2 hour to repair.
I can definitely see the difference with your new camera , video quality is a lot clearer . If by chance anyone is looking for a pickup truck , I have a friend selling his 02 F250 , 7.3 power stroke , 4x4 , needs transmission , recently had new injectors installed . He's asking 3500.00 for it , located in Woodland Washington .
Thumbs up great score on the Grader, It has all the glass in great shape, that is rare, camera was working awsome, enjoy comin along on your adventures
FYI Check the side shift cylinder nuts that hold cylinder piston on. As long as I can remember they had a issue coming loose from new. Seems like once we repaired them in the field the problem was solved. Seen several posts on youtube about the same problem in the past.
Are you going to check and see if that bad pump put any metal in the oil so that when you put the new pump on it doesn’t suck up anything and go out too? Great video thanks for sharing
Hey Quinton !!! ""CONGRATS"" on your ""NEW""/Used toy !! HAHA 👍👍👍👍👍 Where's Casey at as he could have ""FUN"" too with that ?? 🙂🙃😉😊 Is there an oil filter on that power steering pump ?? 🤔🙄 On the big rigs, it's in the oil reservoir for the pump !!!
Toromont eh? That grader started its life in Canada.
Your steer pump is shared with hyds so if you have all other functions but steering is not working your issue lies in the combination valve on side of pump. You have a small piece of debris( most likely rubber) stuck in the orifice of the priority spool in the combination valve( spool sits behind the relief u were playing with). Put finngers in and remove priority spool, put in vice remove grub screw type orifices in each end and clean out with brake clean. Dont just poke out the debris without removing orifices as the debris will just jam up steering again.
All up takes around 1/2 hour to repair.
I can definitely see the difference with your new camera , video quality is a lot clearer . If by chance anyone is looking for a pickup truck , I have a friend selling his 02 F250 , 7.3 power stroke , 4x4 , needs transmission , recently had new injectors installed . He's asking 3500.00 for it , located in Woodland Washington .
Thumbs up great score on the Grader, It has all the glass in great shape, that is rare, camera was working awsome, enjoy comin along on your adventures
FYI
Check the side shift cylinder nuts that hold cylinder piston on. As long as I can remember they had a issue coming loose from new. Seems like once we repaired them in the field the problem was solved. Seen several posts on youtube about the same problem in the past.
Does anyone know what caused this issue other than 16 ft of moldboard ??
Hey great video
You should keep it and trow few buck repair and rent it.look good shape.i work on them in western canada pipeline hard beat.thank video😊
Theres articulation and wheel lean to assist in turning till ya sort that steer issue.
Are you going to check and see if that bad pump put any metal in the oil so that when you put the new pump on it doesn’t suck up anything and go out too? Great video thanks for sharing
Yes definitely
Very cool. Thanks for the video
So.. what's going on with the recent jeep you bought? Any changes?
Hey Quinton !!! ""CONGRATS"" on your ""NEW""/Used toy !! HAHA 👍👍👍👍👍 Where's Casey at as he could have ""FUN"" too with that ?? 🙂🙃😉😊 Is there an oil filter on that power steering pump ?? 🤔🙄 On the big rigs, it's in the oil reservoir for the pump !!!
New camera is fantastic, what brand/model is it ?
cool
16 is 2nd largest in H series. 18 is 2nd largest in late M series and current nomenclature. Great machines. Hope it sells quickly
Quinton and his " new " toys
Looks like mom doesn’t like then!
Go big or go home. The snow won’t have a chance
What does a machine like that sell for (ballpark).
200-250K
How can I get a hoodie or T-shirt?
Iron Kink.
Whats that cat app called?
SiS
It’s toOoo long can’t complete theturn