In 1976, I purchased a Hubler "Hustler" Cue (commonly referred to now as a "Sneaky Pete.") Although I used the traditional 800/900 grain sandpaper to keep it smooth, I never considered removing the accumulated chalk residue. Today (03/06/2020), I received the McDermott Cue Cleaning Kit. One can only imagine my surprise as I used this kit on that shaft. Although I could fill this paragraph with accredited accolades, the simplest would be: IT WORKS!!
No mention of McDermott's Silky Smooth Shaft Wax (the wax is recommended by the McMagic instructions 'for best results in the following order' snippet), but then again this was posted 8+ years ago.
Why would the McDermott cleaner void the warranty to its own cue? I used this cleaning system works great. My McDermott cue feels great after a good cleaning. Good job.
Thank you for the great video, very educational and informative. I was searching for the leather pad on eBay and didn't know what is it for, now i got it and most probably ordering the whole kit rather than the leather pad alone :)
@@cecilperry3794 the sand paper is very non abrasive. To the degree that it's probably less abrasive than printer paper. It's really just to burnish the wood, and it works really well.
I just bought my first cue (sorry, not a McDermott) and was wondering if I needed to take any pre-emptive measures to prevent chalk buildup on my cue (i.e. Treat with wax or silicone?)
Most shafts will have some sort of light sealer or wax applied to it. This will prevent discoloration of the shaft only for a brief period. Discoloration of the shaft is common and should not be considered a defect. This is a byproduct of chalk dust transferring from the table to the hand and then to the cue. Often, the base of the shaft does not get dirty because it is sealed with a urethane finish. We don’t apply this finish to the entire shaft as it would produce too much drag and not glide through your fingers. We’ve found that prevention is the best solution. Some suggestions to minimize the rapid rate of discoloration include: 1. Try to keep hands clean when shooting. 2. Angle the cue at a 30-45 degree angle when applying chalk so that the chalk dust falls on the floor and not on your hand. 3. Brush/vacuum cloth frequently to remove chalk residue. 4. Use of a billiard glove will also prevent buildup on the shaft.
Very educational, a bit humorous when you mention stroke the shaft lol... Any tips on caring shafts that are finished? My shaft is red and I'm afraid whether or not the colour is beneath the surface
Hey Jayme, I've used the cleaning kit for a while but just got some McDermott Silky Smooth Cue Wax. Should I use the wax instead of the conditioner, or should I use both? Thanks!
I use the wax as a supplement to the shaft maintenance kit. Here is how I use all the products assuming the shaft is dirty and requires a deep cleaning. Sometimes I skip step 1 if the shaft is not that soiled: 1. Clean with Renew shaft cleaner. 2. Initial burnish with green and yellow McMagic sheets. 3. Apply Silky Smooth cue wax, let set for 30 seconds, buff vigorously with clean/dry cotton cloth until smooth. 4. Final burnish with blue and brown McMagic sheets. The friction heat will work the wax deeper into the wood grain. 5. Seal with Ultra-Glide shaft conditioner. 6. Use leather conditioning pad to wipe down the shaft during a match and when done shooting before storing it in a case.
Believe it or not this guy uses these same lines when he’s teaching pornstars how to do their job correctly and in his how to be the best wife instructional videos! And even his how to breed farm animals properly, documentary. Honest! If it’s not broke don’t fix it.
In 1976, I purchased a Hubler "Hustler" Cue (commonly referred to now as a "Sneaky Pete.") Although I used the traditional 800/900 grain sandpaper to keep it smooth, I never considered removing the accumulated chalk residue. Today (03/06/2020), I received the McDermott Cue Cleaning Kit. One can only imagine my surprise as I used this kit on that shaft. Although I could fill this paragraph with accredited accolades, the simplest would be: IT WORKS!!
Awesome! I’m going to order one of these kits!
No mention of McDermott's Silky Smooth Shaft Wax (the wax is recommended by the McMagic instructions 'for best results in the following order' snippet), but then again this was posted 8+ years ago.
Which side of the leather cloth do you use?
I’m trying to figure that out do you know what side yet?
Why would the McDermott cleaner void the warranty to its own cue? I used this cleaning system works great. My McDermott cue feels great after a good cleaning. Good job.
Where did you hear that it voids the warranty ?
@@oz1141 idiot commentors here
Thank you for the great video, very educational and informative. I was searching for the leather pad on eBay and didn't know what is it for, now i got it and most probably ordering the whole kit rather than the leather pad alone :)
Awesome! Glad we can help!
I ordered the kit from one of your resellers :) Thanks again
sandpaper no thanks not on any of mine
@@cecilperry3794 the sand paper is very non abrasive. To the degree that it's probably less abrasive than printer paper. It's really just to burnish the wood, and it works really well.
Can u still use the sand paper? Again?
I just bought my first cue (sorry, not a McDermott) and was wondering if I needed to take any pre-emptive measures to prevent chalk buildup on my cue (i.e. Treat with wax or silicone?)
Most shafts will have some sort of light sealer or wax applied to it. This will prevent discoloration of the shaft only for a brief period. Discoloration of the shaft is common and should not be considered a defect.
This is a byproduct of chalk dust transferring from the table to the hand and then to the cue. Often, the base of the shaft does not get dirty because it is sealed with a urethane finish. We don’t apply this finish to the entire shaft as it would produce too much drag and not glide through your fingers.
We’ve found that prevention is the best solution. Some suggestions to minimize the rapid rate of discoloration include:
1. Try to keep hands clean when shooting.
2. Angle the cue at a 30-45 degree angle when applying chalk so that the chalk dust falls on the floor and not on your hand.
3. Brush/vacuum cloth frequently to remove chalk residue.
4. Use of a billiard glove will also prevent buildup on the shaft.
Very educational, a bit humorous when you mention stroke the shaft lol... Any tips on caring shafts that are finished? My shaft is red and I'm afraid whether or not the colour is beneath the surface
does this void the warranty?
Good question! No, this does not void the warranty.
Dam this guy is good at stroking his shaft
Hey Jayme, I've used the cleaning kit for a while but just got some McDermott Silky Smooth Cue Wax. Should I use the wax instead of the conditioner, or should I use both?
Thanks!
I use the wax as a supplement to the shaft maintenance kit. Here is how I use all the products assuming the shaft is dirty and requires a deep cleaning. Sometimes I skip step 1 if the shaft is not that soiled:
1. Clean with Renew shaft cleaner.
2. Initial burnish with green and yellow McMagic sheets.
3. Apply Silky Smooth cue wax, let set for 30 seconds, buff vigorously with clean/dry cotton cloth until smooth.
4. Final burnish with blue and brown McMagic sheets. The friction heat will work the wax deeper into the wood grain.
5. Seal with Ultra-Glide shaft conditioner.
6. Use leather conditioning pad to wipe down the shaft during a match and when done shooting before storing it in a case.
@@mcdermottpoolcues thanks for the info!
Doesn’t using the pads void the shaft warranty.
what did us old-timers do before they had all this crap? most of them carried a piece of green scotch broth pad I used a dollar bill
Bobby Wright a piece of the finest steel wool you can buy is A1
I used a fresh cut top sirloin to burnish the shaft!!! :)
Huh, huh he said stroke the shaft then apply the ultra glide with a twisty motion.
Children on TH-cam 👆🏿
Pumice as well,... grind that volcanic rock deep into the wood fibres, then sand them out lol!
sandpaper on a shaft, holy shit O.O
Pumice as well,... grind that volcanic rock deep into the wood fibres, then sand them out lol!
Believe it or not this guy uses these same lines when he’s teaching pornstars how to do their job correctly and in his how to be the best wife instructional videos! And even his how to breed farm animals properly, documentary. Honest! If it’s not broke don’t fix it.
It’s $44 now
and now 47 lol
2 years later you're using a shaft the size of a pencil, no thanks I'll not be taking sandpaper anywhere near my cue shafts...
I will complain this product the shaft is defective
$44 in 2022
Guy seems like he knows his way around a shaft lol
And no cream in sight!