How to Replace Downstream O2 Sensors 2003-2007 Honda Accord (3.0L V6)

Buy Now!
New O2 Oxygen Sensor from 1AAuto.com trq.video/ib-1...
This video shows you how to install new TRQ oxygen sensors on your 2003-2007 Honda Accord (3.0L V6). The Oxygen (O2) sensors help monitor the emissions system in your vehicle. They measure the amount of oxygen passing through the exhaust, which informs the computer about proper fuel/air mixture, and the condition of the catalytic converter. Over time, the sensors may fail due to contamination, or reaching the end of their service life. TRQ offers new O2 sensors made to manufacturer’s specifications.
Estimated installation time for a professional technician is approximately: 30 minutes
This repair was done on a 2006 Honda Accord EX 3.0L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2003 Honda Accord
2004 Honda Accord
2005 Honda Accord
2006 Honda Accord
2007 Honda Accord
Tools you will need:
• Deep 22mm O2 Sensor Socket
• Pliers
• Ratchet trq.video/ocjC...
• Socket Extensions trq.video/ocjR...
• Torque Wrench trq.video/obnk...
• Gloves trq.video/obqI...
• Safety Glasses
• Floor Jack trq.video/oaF7...
• Jack Stands trq.video/oasx...
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Honda Accord 2003-2007 7th Gen: • Honda Accord 2003-2007...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@alexandercahoulan6583]

Just for correct info. The front bank is bank 2. Cylinders 4-5-6. You never know who may need this info.

[@Codebluesituation]

i have the same car. i'm getting "P0141 02 censor heater circuit bank 1 sensor 2." Is that the sensor at 0:15 in the rear ? or the one in the front

[@scottferguson2409]

so you’re removing the upstream one in this video correct?

[@codybreaux]

Bank 1 sensor 2 is Downstream right?