Please brother don’t ever use sharrk bite unless you have no choice. Also should always check the P-trap cause what if there’s something long in there like a popsicle stick. You never wanna get a call back.
Back in the day I believe Cook County required the electrical wires to be soldered together and then taped. I came across that in a commercial property in the early 90's that I was doing work at.
pex a and expansion fittings are amazing for cold resistance and theyre both very new. i have seen sulfuric acid (blue monster/liquid fire] eat away gaskets under the drain before
Everything has a place where to be used. I used shark bites once where the copper was against a wood beam and not practical to solder worked great would i use them in a regular basis, NO! Wagos are great in box’s that aren’t crowded have used them in crowded box came back to install switch plate and two wires had fallen out it was way too tight and the pressure of the wires kept pulling didn’t feel comfortable using them took em all out and used twist on’s. Easy drain fix you finally got a break 👏👏
One of the few times I've seen you fix it that fast. I almost thought you were going to start disassembling the p trap and was yelling at you to take the win and leave!
Lol dude 🤣 at least u understand 😂 this is like 1% of jobs for me. Usually there is always problems or extra problems. Lol I have to take these wins thanks for watching. It's good to have people rooting for me
Oh glass fuses what a good time. Did it at least have a ground? Thoes decora edge are great glad there's a comerical version as well. Shark bikes are only as nessary press is way more reliable. I only carry 1.5 drain kits myself why even bother with smaller for the hair to clog up. I can hear it now but that's what your supposed to use I don't care 🤷. I even stock these helicoils that go over the thoes cheap stone like threads for thoes all in one sinks. I've been bitten too many times with built in external threads that will sheer off when you tighten it too much. Property management dosent like when you say they need a new countertop. You plunged that problem away widh they went that easily at least half the time.
99% of the time it's a clog around the water stopper. hair mostly. I go straight to the back of the pipe an remove the pivot rod. Then remove the stopper sn the clog can be removed easily. That plastic thing is gimmick to me.
If only all your drain clogs were that easy.
Well done mate, cheers for the video.
@@M1lh0u53ISGaming dudeeeee I would be rich lol 🤣 😆😆 I would wish that for everyone
Easy peasy lemon squezzes. Bank those dollars ❤
Lol 😆 100 bucks in and our baby
Please brother don’t ever use sharrk bite unless you have no choice. Also should always check the P-trap cause what if there’s something long in there like a popsicle stick. You never wanna get a call back.
This is true 👍
thxs for sharing, it's a wrap...
Thanks Tom for te support!
@@thehandymanexperience226 stay safe
Those sometimes quick jobs can sure get you to the next job or home faster, good work.
Man these jobs are like 1% well cus the properties have a million other issues so I have to fix the leak lol or what ever
Back in the day I believe Cook County required the electrical wires to be soldered together and then taped. I came across that in a commercial property in the early 90's that I was doing work at.
I've only ran into it twice .I feel like a newbie
@@thehandymanexperience226 We never stop learning doing this type of work.
pex a and expansion fittings are amazing for cold resistance and theyre both very new. i have seen sulfuric acid (blue monster/liquid fire] eat away gaskets under the drain before
This is true!!!
Everything has a place where to be used. I used shark bites once where the copper was against a wood beam and not practical to solder worked great would i use them in a regular basis, NO! Wagos are great in box’s that aren’t crowded have used them in crowded box came back to install switch plate and two wires had fallen out it was way too tight and the pressure of the wires kept pulling didn’t feel comfortable using them took em all out and used twist on’s. Easy drain fix you finally got a break 👏👏
Love it bro!!!
One of the few times I've seen you fix it that fast. I almost thought you were going to start disassembling the p trap and was yelling at you to take the win and leave!
Lol dude 🤣 at least u understand 😂 this is like 1% of jobs for me. Usually there is always problems or extra problems. Lol I have to take these wins thanks for watching. It's good to have people rooting for me
Oh glass fuses what a good time. Did it at least have a ground? Thoes decora edge are great glad there's a comerical version as well. Shark bikes are only as nessary press is way more reliable. I only carry 1.5 drain kits myself why even bother with smaller for the hair to clog up. I can hear it now but that's what your supposed to use I don't care 🤷. I even stock these helicoils that go over the thoes cheap stone like threads for thoes all in one sinks. I've been bitten too many times with built in external threads that will sheer off when you tighten it too much. Property management dosent like when you say they need a new countertop. You plunged that problem away widh they went that easily at least half the time.
Love the decora edge ! I'd have to see what your talking about with the helicoils . Yea about time I get a nice and super easy one
Ill use shark bites for hot water tank installs in my rental because youll be changing it out in 7-10 yrs, depending if GE of Bradford White.
@@bobcaygeon975 yep and the shark bites should outlive the water heater easily
99% of the time it's a clog around the water stopper. hair mostly. I go straight to the back of the pipe an remove the pivot rod. Then remove the stopper sn the clog can be removed easily. That plastic thing is gimmick to me.
Lol I believe this but the properties I deal with isn't 99% of the time lol