Start to finish is always my favorite, especially when you throw something different in! Really liked seeing the direct results of the lead precipitation, it's like something you know is there but normally not nearly as pronounced! Excellent and educational, tip of the hat to you sir!
a bottle or a beaker with 100g of gold in solution must be something rather interesting to handle. the feel of that heavy liquid flowing around. and the ice... just imagine having a long drink that heavy
Great video! Love your relaxed but enthusiastic way of talking us through the process. Wonderful how i can still keep watching gold refining video and not get bored of it!
Your work is soooo fascinating. I have learned an enormous amount of practical knowledge on a subject that I simply can’t get enough of. Thank you so much for sharing Mr. Sreetips. You do such great work and your respect for the subject matter and your audience comes through in every video.
Thanks to your advice I was able to find a sterling silver spoon at an estate sale for $1 I'm so excited to start buying precious metals and I appreciate all the amazing content you create. Lots of love for the channel 🤑
It’s out there. Because folks are clueless about silver and gold. The currency printers have made silver and gold incompatible. A barbarous relic. And they are still desperately trying to reduce real money (gold and silver) to mere “investments”. But as people slowly begin to catch on that paper is worthless, then the metals will become more difficult to find. We’ve already noticed that it’s getting harder to find.
I got into making jewelry in part because of you. Of course now I can recycle the failures using you as a reference to remember all the stuff I learned.
That’s an amazing process sir thank you for all your hard work time and money you spend on these experiments you show us week after week year after year!
This has got to be the most fluff ups you have done in one video, from gold splashing on the table to electrode hanger being to thin. It's good to see even you make fluff ups, even better you showed them in your video. Good stuff to know..
Thanks for taking us on these experiment journeys with you. It is obvious this is horribly inefficient, but the results look fascinating. Always something to learn.
thats great sir i knew you would find the best way what you do and how much you know about this is unparalleled and the only channel of its kind you sir are a legend and love to watch you work brother
Good seeing the various approaches. Always interesting. Going forward I suggest you keep the DC power source out of the fume hood. Some of the acid vapours which turn up in that area will destroy electronics. Al alternate approach would be flexible heavy duty leads (similar to what you find in jumper leads of the middle quality) to carry the current and not fight your positioning too much.
I think I’ve been watching your channel for about 200 years, but this is the first time I remember ever seeing lead precipitate out after sulphuric acid treatment, even though you do it at every gold refining!
First lead precipitation from H2SO4 I've seen on your channel Sreetips. I know you always put it in just in case but this is really cool because of the material you put in, the odds of precipitating lead was virtually 100%. That's really cool to see in action.
great video , you could get a custom mould made so when you pour a anode bar it also makes the long thin bit for hanging at the same time. after you use it down to its nub , toss the nub into the next melt.
Sreetips just a suggestion or request per se I'd like to see a video where you break down and explain all the precautions you take for safety measures working with these materials. I tried searching your old videos but never found one that outlined that. I know a lot is common sense but It may be very helpful to some and I bet it would get a lot of views.
I love these videos! I love the science and chemistry behind it. Streetips, if I may make a request, it would be fantastic if you could put the reactants and products for each chemical that you use. For example, when you use the Stump-out, show the reactants and products (equation) on the screen! That would be really cool for us nerds that like that kind of stuff. Thanks for your content! :)
7:26 Impressive transfer of the ice without a splash! I didn't know that 7-Eleven sold lab equipment?! My wife and I are truly fascinated with your work! Expecting to try our first silver cell next year!
Because the yellow liquid was gold in solution. I poured the SMB saturated waste of the gold in the beaker, and the gold from the yellow liquid precipitated.
Thank you - this channel processes allot of time Also. After watching the full jewelers carpet (1 sq yd) I again heard irritation in your breathing, you know I'm a docker, a piece of incense left burning UNDER THE HOOD while you take the parrot to the spa when you all return - the nose knows love ya but we all know its the glow of gold once it's heated up illuminations all over the room
I have reduced lung function because I ignored warnings about refining in my back yard without a fume hood. Also, blurry spots on my eye lenses due to nitric fumes
No contamination from the graphite as long as it’s clean. Three nines is industry standard for pure gold. So the fourth nine is totally unnecessary unless needed for some specific purpose such as a test standard. The only reason I did it is for the show, and demonstrate that I can, and produce a new and interesting video for my channel.
I understand you need to be quick to pour the gold when molten but maybe being more gentle on pouring can improve the overall aspect of the finished bar? I mean to avoid those blobs and holes. Or is it an unavoidable graphite mold problem?
Given your amazing expertise in precious metal chemistry, have you given any thought to attempting to create some of the other gold mixes like rose or purple? Excellent video as always.
Melting in a crucible with an electric coil around it could also be spectacular in its own way. Maybe it can reach even higher temperatures, so that it cools slower, and the bottom and sides of final bar could be smoother.
how much do all the chemicals cost you to do this? That must be factored in... but there's nothing like pure gold. That brightness in the shade is unmistakable.
I think a highly polished plate of pure chromium would make a better cathode. A mild steel spatula is not going to scratch chromium, and the highly polished surface should aid in releasing the gold deposit.
I think reversing the polarity of the cell for like 1 second would cause all the gold to pop off. But he'd probably want to do that in a different batch (or type) of electrolyte, so that would add another step/hassle. He might also try putting the cathode in the freezer overnight, the contraction caused by lower temps might cause the gold crystals to fall off.
I have a question when you precipitate the gold some was still in suspension could u add a surfactant to break that water tension allowing more gold particulate to drop from suspension I know u recover in waste jars (more wondering chemical wise if it will mess up the processes)
Consider just welding the gold hook to the anode bar with another piece of gold? Ive seen you make gold repairs, so im confident you have the skill to do that. 👌🏼
Excellent video, thank you! Is the 9999 purity of the final gold bar a theoretical value due to the electrolytic refining method? Do you know if there’s an analytical method to determine the actual purity?
Question: in the fail attempt of the 14k Anode hanger does the amount of other metals comprising the 14k included in the anode adversely affect the purity of gold plated onto the cathode.
Should have weighed the hook before and after. Also, there may be more or less gold left in the electrolyte once the job was done. The electrolyte should start out saturated with gold.
Yes I think you're right - the sodium metabisulfite dissolves in the solution, then gets washed away during the various boils/rinses/pour-offs. Some of it off-gasses as sulfur dioxide gas during the bubbling as the gold is precipitating.
Got this from “Butcher” on the goldrefiningforum.com Sodium metabisulfite in gold solution: Na2S2O5 + H2O --> 2 NaHSO3 Notice we actually make sodium bisulfite Then 2 AuCl3 + 3 NaHSO3 + 3 H2O --> 2 AU + 6HCL + 3 NaHSO4
Why is the inquarting part done? Does it help remove impurities or something? It seems to my uneducated self that it would just be easier to add the nitric acid without the inquarting, but there must be a reason it's done.
Sir, could I please ask why you haven't used a titanium bowl and made a system similar to your silver cell. You can get decent sized bowls in titanium for camping. Just curious is all. Thank you for you videos. I enjoy each one. Have a great day.
Only to you, the viewer, if you like seeing the gold refined electrolytically. Three nines is industry standard for pure gold. So the fourth nine is totally unnecessary unless needed for some specific purpose such as a test standard. The only reason I did it is for the show. To demonstrate that I can, and produce a new and interesting video for my channel.
Another great video! Hey, after you added the Stomp and let the gold precipitate out, I noticed some specs floating at the top. What is that floating stuff? Is it lead?
It is better to create the cathode with 1000 purity graphite bar. They can be cut with diamond discs so there is no possibility of contamination of the lower alloy. I use a flat bar and modified the ingot part so that the gravitation bar is half the height of the ingot plus a square on the bar to avoid spilling the casting. I also suggest that you apply electroplating to the crocodile clips to prevent corrosion of the metal with rhodium or platinum plus a heat shrinkable sleeve to protect the visible area of the copper. Also the soldering part of the clamp to copper can be insulated with silicone without sections so that corrosion does not get inside the main cables. Another method I use is a perforated crucible and add there is the shot the graphite is never damaged in the electrolytic acid for massive electroplating
I didn't watch this one, but good work team. I know it was good work for sure. I'm not watching your content now, not because I don't like it, I do, but I have very little spare time now. But while I did, it was an amazing journey.
@@sreetips thanks chief. For now, this is goodbye. But I have your TH-cam channel noted down on a piece of paper among 100 other great TH-camrs like you. One day, I plan to become a leader in my country, and I will surely speak greatly about you there.
On the finished bar, what is that pink nodule? I'm guessing that it's flux from the melt dish? Interesting video, thanks for posting. I don't understand exactly why, but there is something relaxing about watching these.
Just wondering if it would work the same way as your silver cell as a gold cell. Make all your scrap into shot and process the same to get gold crystals. Would save a ton on chemicals and reagents.
You could almost hear the collective “OOHHHHH” of the viewers when that gold sponge splashed out of the funnel😅 Suggestion for Sreetips: Find a worn out cheap bar mold and grind a hook shaped channel at one end with a dremel tool. Pour the bar and hook as one flat piece. Once cooled, twist the hook 90deg to hook onto the beaker.
The timelapse at the end with the electrolysis eating away at the gold bar was marvelous.
Indeed, not only does it look awesome but I've never seen that before.
It was like watching a popsicle slowly dissolve exposing amazing crystal formations under the exterior.
why did he do this second time can u explain electolysis for gold bar like why he got bar then why did he do it second time
@@ibhp7146 Higher purity
Insane how on point he is!
I always love spotting the secondary precipitations in the waste container. It's like an Easter egg.
Start to finish is always my favorite, especially when you throw something different in! Really liked seeing the direct results of the lead precipitation, it's like something you know is there but normally not nearly as pronounced! Excellent and educational, tip of the hat to you sir!
Thank you
Again thank you for another excellent video! I can't watch your beautiful work enough.
a bottle or a beaker with 100g of gold in solution must be something rather interesting to handle. the feel of that heavy liquid flowing around. and the ice... just imagine having a long drink that heavy
I loved actually seeing the lead sulfate this time. Cheers, sir.
Great video! Love your relaxed but enthusiastic way of talking us through the process. Wonderful how i can still keep watching gold refining video and not get bored of it!
Your work is soooo fascinating. I have learned an enormous amount of practical knowledge on a subject that I simply can’t get enough of. Thank you so much for sharing Mr. Sreetips. You do such great work and your respect for the subject matter and your audience comes through in every video.
Thanks to your advice I was able to find a sterling silver spoon at an estate sale for $1 I'm so excited to start buying precious metals and I appreciate all the amazing content you create. Lots of love for the channel 🤑
It’s out there. Because folks are clueless about silver and gold. The currency printers have made silver and gold incompatible. A barbarous relic. And they are still desperately trying to reduce real money (gold and silver) to mere “investments”. But as people slowly begin to catch on that paper is worthless, then the metals will become more difficult to find. We’ve already noticed that it’s getting harder to find.
Excellent work as always.
This electrolysis stuff is very interesting.
I've been reading my new CM Hoke book this weekend. Fascinating.
Love how chill he is with mishaps
Every time you make a bar of 9999 gold I just love it, its beautiful.
I'm so impressed with you're videos, also that you go through all the comments.
You are always welcome. Those who have opted out are really missing out. Great rapid-fire production! Thank you Sir!👍👍🤟
I got into making jewelry in part because of you. Of course now I can recycle the failures using you as a reference to remember all the stuff I learned.
That’s an amazing process sir thank you for all your hard work time and money you spend on these experiments you show us week after week year after year!
I thought this bar was even shinier than normal - very nicely done.
Now that I’ve looked at it, it does look exceptional.
This has got to be the most fluff ups you have done in one video, from gold splashing on the table to electrode hanger being to thin. It's good to see even you make fluff ups, even better you showed them in your video. Good stuff to know..
Thanks for taking us on these experiment journeys with you. It is obvious this is horribly inefficient, but the results look fascinating. Always something to learn.
Actually, just about all pure gold bars or coins are refined like this, only on a much larger scale.
This was very interesting to watch as always. The time lapse of the electrolytic process was awesome.
thats great sir i knew you would find the best way what you do and how much you know about this is unparalleled and the only channel of its kind you sir are a legend and love to watch you work brother
Thank you
dude the way the anode bar reveals the crystalline structure underneath the surface as the cell eats it is so cool
I never get tired of watching gold melt! 🔥👑🔥👈😎👍
Good seeing the various approaches. Always interesting.
Going forward I suggest you keep the DC power source out of the fume hood. Some of the acid vapours which turn up in that area will destroy electronics.
Al alternate approach would be flexible heavy duty leads (similar to what you find in jumper leads of the middle quality) to carry the current and not fight your positioning too much.
Good suggestion, thank you.
I think I’ve been watching your channel for about 200 years, but this is the first time I remember ever seeing lead precipitate out after sulphuric acid treatment, even though you do it at every gold refining!
That’s because I actually seen some lead solder on some of the karat scrap in this lot.
One of my favorites. Even though you had mistakes you didn’t edit them out. Thumbs up 👍🏾
196th! Haven’t seen this procedure done before now. Very interesting. Roger in Pierre South Dakota
Really cool experiment SReetips. Best gold purification on the 'tube!
I thought that was keif in the thumbnail being lit by the torch 😂😂
I like this method over using the acid over and over again. Looks simpler. Less mess. Higher purity.
First lead precipitation from H2SO4 I've seen on your channel Sreetips. I know you always put it in just in case but this is really cool because of the material you put in, the odds of precipitating lead was virtually 100%. That's really cool to see in action.
I love these backyard chemistry setups
I have to agree the time lapse is crazy the gold looks like it turns into a crystal
I love watching your videos, and I always wish I'd worked harder in chemistry at school 😢😢
Always amazed at how professional you are at recovering precious metals. I am not so inclined to do this myself as i am no chemist by any means.
great video , you could get a custom mould made so when you pour a anode bar it also makes the long thin bit for hanging at the same time. after you use it down to its nub , toss the nub into the next melt.
wow, the electrolytic refine really is next level
I love watching people in comments freak out over Your spilled gold bits.
Gold Fever is real. Funny, but real. 😁
That never would happen if not for the camera in my way.
Thank you for the video, I liked seeing from start to finish in one video.
The next run you do with the karat scrap electrolytic Gold cell is love to see the gold from the titanium under a microscope😏👀👀👀
18:37 Это фиаско братан.
Sreetips just a suggestion or request per se I'd like to see a video where you break down and explain all the precautions you take for safety measures working with these materials. I tried searching your old videos but never found one that outlined that. I know a lot is common sense but It may be very helpful to some and I bet it would get a lot of views.
Gooooood evening from central Florida! Hope everyone has a great night!
@@riverfrance5676 👋 Howdy!
Goooood evening
I love these videos! I love the science and chemistry behind it. Streetips, if I may make a request, it would be fantastic if you could put the reactants and products for each chemical that you use. For example, when you use the Stump-out, show the reactants and products (equation) on the screen! That would be really cool for us nerds that like that kind of stuff. Thanks for your content! :)
I’d have to hire a chemist, or learn how to do it.
I have nothing negative to give, we have opposition in all things. When you do good you will draw some negative. Keep up the good work please 😃
14:57 bonus precipitation from waste solution.
Mr. Sreetips in what situation do you use the “specially prepared” filters? Thanks for the fascinating content!
Gold filled
14:50 WHOA !, pretty cool waste container transformation
7:26 Impressive transfer of the ice without a splash!
I didn't know that 7-Eleven sold lab equipment?!
My wife and I are truly fascinated with your work! Expecting to try our first silver cell next year!
@14:50 why has the gold-refining-waste beaker suddenly changed its color and transparency ?
Because the yellow liquid was gold in solution. I poured the SMB saturated waste of the gold in the beaker, and the gold from the yellow liquid precipitated.
Spectacular as always! Thank you Sreetips!!
Thank you - this channel processes allot of time
Also. After watching the full jewelers carpet (1 sq yd) I again heard irritation in your breathing, you know I'm a docker, a piece of incense left burning UNDER THE HOOD while you take the parrot to the spa when you all return - the nose knows love ya but we all know its the glow of gold once it's heated up illuminations all over the room
I have reduced lung function because I ignored warnings about refining in my back yard without a fume hood. Also, blurry spots on my eye lenses due to nitric fumes
Does the wet gold get contaminated at all with graphite from the mold ? Does three nines sell for different than four nines?
No contamination from the graphite as long as it’s clean. Three nines is industry standard for pure gold. So the fourth nine is totally unnecessary unless needed for some specific purpose such as a test standard. The only reason I did it is for the show, and demonstrate that I can, and produce a new and interesting video for my channel.
I understand you need to be quick to pour the gold when molten but maybe being more gentle on pouring can improve the overall aspect of the finished bar? I mean to avoid those blobs and holes. Or is it an unavoidable graphite mold problem?
The key to a perfect bar is to get the mold real hot.
Given your amazing expertise in precious metal chemistry, have you given any thought to attempting to create some of the other gold mixes like rose or purple? Excellent video as always.
I’m a refiner, making gold alloys is going in the wrong direction.
Such a wonderful result 👍🏻❤️
Melting in a crucible with an electric coil around it could also be spectacular in its own way. Maybe it can reach even higher temperatures, so that it cools slower, and the bottom and sides of final bar could be smoother.
how much do all the chemicals cost you to do this? That must be factored in... but there's nothing like pure gold. That brightness in the shade is unmistakable.
I’d say less than a hundred bucks, not counting the gold.
I think a highly polished plate of pure chromium would make a better cathode.
A mild steel spatula is not going to scratch chromium, and the highly polished surface should aid in releasing the gold deposit.
I think reversing the polarity of the cell for like 1 second would cause all the gold to pop off. But he'd probably want to do that in a different batch (or type) of electrolyte, so that would add another step/hassle. He might also try putting the cathode in the freezer overnight, the contraction caused by lower temps might cause the gold crystals to fall off.
I have a question when you precipitate the gold some was still in suspension could u add a surfactant to break that water tension allowing more gold particulate to drop from suspension I know u recover in waste jars (more wondering chemical wise if it will mess up the processes)
I could have stirred it up and got all of it to settle. But instead, I like adding it to my waste container and let it accumulate.
I get that makes for a nice waste processing video
Consider just welding the gold hook to the anode bar with another piece of gold? Ive seen you make gold repairs, so im confident you have the skill to do that. 👌🏼
Hello Mrs and Mr Sreetips.
It is so early...but always ready for a clip from you Sir🔥
Say hello to your wife Sir🌸🌸
God bless you🔥
It seems there's a bead of solidified flux on the end of the bar?
Correct
Excellent video, thank you! Is the 9999 purity of the final gold bar a theoretical value due to the electrolytic refining method? Do you know if there’s an analytical method to determine the actual purity?
ICP analysis.
Another great series thanks so much Sir 🫡
Question: in the fail attempt of the 14k Anode hanger does the amount of other metals comprising the 14k included in the anode adversely affect the purity of gold plated onto the cathode.
No
First 👍's up sreetips thank you for sharing 🤗
Was the loss was expected from impurities from lead? or just a bunch went into the vial of "to be continued"?
Should have weighed the hook before and after. Also, there may be more or less gold left in the electrolyte once the job was done. The electrolyte should start out saturated with gold.
There’s probably 8 or 10 grams of pure gold still left on the back of the cathode.
@@sreetips ahh roger
Would painting some insulation on the back and sides of the cathode help to grow the gold only in one spot?
Or would a pure gold cathode work ?
I’ve used pure gold cathode, works beautifully. I’d hesitate to paint anything on the cathode.
What’s the reason for not pouring the new gold over the shark tooth sitting in the mold where it was originally formed?
Didn’t think of it.
@@sreetips fair enough. Was wondering if there was a reason that didn’t occur to me.
Where does the stump out go when you do the precipitation, does it get washed away with the follow up boils and rinses before the melt?
Yes I think you're right - the sodium metabisulfite dissolves in the solution, then gets washed away during the various boils/rinses/pour-offs. Some of it off-gasses as sulfur dioxide gas during the bubbling as the gold is precipitating.
Got this from “Butcher” on the goldrefiningforum.com
Sodium metabisulfite in gold solution:
Na2S2O5 + H2O --> 2 NaHSO3
Notice we actually make sodium bisulfite
Then
2 AuCl3 + 3 NaHSO3 + 3 H2O --> 2 AU + 6HCL + 3 NaHSO4
It always makes me so sad seeing old silverware being destroyed. 😢
Mr sreetips, what kind of fuel do you use in your torch? Oxygen/acetylene? Oxygen/propane?
Oxy/acetylene.
Why is the inquarting part done? Does it help remove impurities or something? It seems to my uneducated self that it would just be easier to add the nitric acid without the inquarting, but there must be a reason it's done.
It reduces gold concentration down to 25% so the nitric can penetrate
@@sreetips Ah, I see. Thanks for the clarification!
Sir, could I please ask why you haven't used a titanium bowl and made a system similar to your silver cell. You can get decent sized bowls in titanium for camping. Just curious is all. Thank you for you videos. I enjoy each one. Have a great day.
I’m using the model cell shown in the book and I’ve got good results so far.
Looks like the same refining of the other bars. I mean it's not much shinier! Do you think it makes any difference going through that process?
Only to you, the viewer, if you like seeing the gold refined electrolytically. Three nines is industry standard for pure gold. So the fourth nine is totally unnecessary unless needed for some specific purpose such as a test standard. The only reason I did it is for the show. To demonstrate that I can, and produce a new and interesting video for my channel.
Another great video! Hey, after you added the Stomp and let the gold precipitate out, I noticed some specs floating at the top. What is that floating stuff? Is it lead?
No, those were pieces of pure gold attached to tiny bubbles. I added that to my off-line savings account (temp waste container).
One of the most outstanding videos to date. 👊🇺🇸🧂
Excellent video awesome content thank you for always sharing with us six stars brother
The anode produced some sludge into the electrolyte while dissolving. Did you filter the electrolyte to see what that was?
Not yet, I’ll do it before its next use.
Awesome video nice gold bar and sharks tooth thanks for sharing sreetips
It is better to create the cathode with 1000 purity graphite bar. They can be cut with diamond discs so there is no possibility of contamination of the lower alloy.
I use a flat bar and modified the ingot part so that the gravitation bar is half the height of the ingot plus a square on the bar to avoid spilling the casting.
I also suggest that you apply electroplating to the crocodile clips to prevent corrosion of the metal with rhodium or platinum plus a heat shrinkable sleeve to protect the visible area of the copper.
Also the soldering part of the clamp to copper can be insulated with silicone without sections so that corrosion does not get inside the main cables.
Another method I use is a perforated crucible and add there is the shot the graphite is never damaged in the electrolytic acid for massive electroplating
Sounds like you’ve done it a time or two. Good suggestions, thank you
Great Work Sreetips 🐉 Thanks for sharing with us 🙏 God Bless 🦅
Getting it all off of the plate is the issue with time savings?
I didn't watch this one, but good work team. I know it was good work for sure. I'm not watching your content now, not because I don't like it, I do, but I have very little spare time now. But while I did, it was an amazing journey.
Thank you for commenting.
@@sreetips no problem, but in the future I likely won't be able to, that's why I said this now.
Keep your head down, and be safe!
@@sreetips thanks chief. For now, this is goodbye. But I have your TH-cam channel noted down on a piece of paper among 100 other great TH-camrs like you. One day, I plan to become a leader in my country, and I will surely speak greatly about you there.
@StefanShorko excellent, thank you,
So when that 14k clip melted into the the .999 fine gold, did it not contaminate the golds purity when remelted it into the new adenoid bar?
Yes
Central Florida here too. Sreetips is intriguing how did you come up with that handle?
Meaningless word, like Kodak
@@sreetips Perhaps but it is catching.
Only the King of Inquartation can do this in under 24 hours.
Thank you for the longer video 😊
Baby Shark's Tooth kinda Cute!!!; )
Your electrolyte seemed more reddish after you were done. Is that just lighting or did something change?
Heat cause it to darken like that. It turns from orange/red to more yellow as it cools.
I can't believe you melted it. I thought you were doing all this to keep it in crystal form. It's worth more than bar form.
Same
Yummy Aqua Regia on the rocks. @ 12:08 It's like a cosmic martini
Isn't it cleaner to participate out the gold with gas as opposed to stump out
Yes
On the finished bar, what is that pink nodule? I'm guessing that it's flux from the melt dish?
Interesting video, thanks for posting. I don't understand exactly why, but there is something relaxing about watching these.
That was a spot of borax
Just wondering if it would work the same way as your silver cell as a gold cell. Make all your scrap into shot and process the same to get gold crystals. Would save a ton on chemicals and reagents.
I don’t think so.
What happened to the silver from the first 14k hook that melted into the anode? In the waste electrolyte solution?
Yes
this is the most efficient refining :)
Curious - how do you know it's 4x9s and doesn't have, eg, titanium impurities either absorbed or from scraping off the cathode?
There’s going to be some titanium from scraping. But parts per million only. Not enough to report in an assay.
What was the little blemish on the edge of the final ingot? Looked like a bead or something.
Flux
Borax
You could almost hear the collective “OOHHHHH” of the viewers when that gold sponge splashed out of the funnel😅
Suggestion for Sreetips: Find a worn out cheap bar mold and grind a hook shaped channel at one end with a dremel tool. Pour the bar and hook as one flat piece. Once cooled, twist the hook 90deg to hook onto the beaker.
That wouldn’t have happened if that pesky camera wasn’t in my way (all the time).
Made an anode mold, good suggestion.
The only thing in these videos that rivals the beauty of pure gold is the vivid color of pure solutions.