Could you please consider showing us on the next video how to configure a GPS and LED light. Please consider doing a long range 7 or 8 inch quad build.
I tried to configure according to your video although preview responds according to the remote control. However, the motor does not spin, even though I am able to control motors using app. I have configured the flysky transmitter and the receiver with the speedy bee F7 stack. In my Flight controller there are 4 pins for receiver (GND, 5v, R2 and T2). What should I do and what is the problem?
Just finished building this fpv drone but I'm struggling to connect my fatsharks with rapid fire to the vtx on the drone!! Can't find any info on why it's not working. The vtx signal doesn't seem to show on the fat sharks and I really don't know why?!! All soldering is correct and drone works perfect in every other way. Any info would be a great help!
I just built it but I have a dinky 1100 mah 4s on it. What kind of battery would you recommend. 4s for my novice skills seems more than sufficient. How many grams should the battery weight max?
Oh by the way I live in England and it's nearly always wet here. As a noob I am landing in wet grass. Have you ever used anything to waterproof the electronics? Is it even possible?
awesome series! helps so much, thanks for the effort! would you reccomand another camera for this setup now? what about the Foxeer Monster Mini Pro. I found this in one of your old builds? thanks so much for helping out! :)
Ok, so I've been searching and searching for that 3d printed xt60 frame mount/holder. I can't seem to find it anywhere. What is that "thing" called?!?! Thank you in advance to anyone that might be able to steer me in the right direction 😎🤘🍻☺
@@godsun358 hmm. It seems like it airmode I've only been in this a year and my first quad hit the snow quite a bit cuz I wasnt sure how to use airmode. You got it on a switch or turned on in config?
Hi you are great I wish I had a buddy like you I love your area It's the best for development and manufacturing I imagine hover boards like in the movie Back to the future? The movie also did predict Obama as president in the 50s I thus know the hover board is true however who gets to build it I am on a budget and would like to build my first fpv quad Please can you assist me I know your experience is a real cost saver I live in the UK however we can begin on wats up and email I hope I do have certain skills you might almost like I am an artist both instrumental and literature including design I don't mind building a basher first because I know I will crash as a beginner however my experience after would help me build even more complex units I am also a programmer and chef I know I should be comfortable with all I know however prejudice is my reality A budget starter kit and the right sellers will be appreciated Sincerely 💕 Ejike
i bought a couple times from them i am on the US most of they staff is shipped from China with whats going on with Covid19 not sure how long it will take or if they shipping.
![⭐ฮิตในTikTok!! ( หมูเด้ง MooDeng ) Ver. แดนซ์โจ๊ะๆ ReMix BY [ ดีเจกิต รีมิกซ์ ]](http://i.ytimg.com/vi/3krsyfWUeHU/mqdefault.jpg)
Emax ECO 2207 2400kv: bit.ly/2pwsXdk
iFlight SL5: bit.ly/2kBCNZz
RushFPV Tiny Tank: bit.ly/38KFhbo
Rush Antenna: bit.ly/2SQ0ETp
Diatone F60 ESC: bit.ly/2S1tnEw
Diatone F405 DJI: bit.ly/32jWPZQ
Racer Nano: bit.ly/2L6Pzd8
XT60: bit.ly/2T6oQQl
Xm+ Receiver: bit.ly/2Kamywh
ReelSteadyGo Coupon:
reelsteady.com/DroneMesh
Coupon: MESH
Wich Battery can you recommend?
What about batery
Hi.. What is the function of the micro cam?
Where do I find the 3 printed part that holds the tiny rush receiver?
Could you please consider showing us on the next video how to configure a GPS and LED light. Please consider doing a long range 7 or 8 inch quad build.
Long range 7 inch cinematic build would be great, with states straight in there i.e. weight, overall cost and most important flight time!
Is the last video of the PID tune still coming? Would really complete this series, it's been so informative and helpful for a beginner.
Yes please
We are still waiting
Did he make one?
This channel deserve millions of subs
Great job on this video series. I just want to say thank you for clarifying the 'magic' of the FPV kwad hobby.
lol, the magic disappeared in around 2015, while everyone trying to build their own q250 or f450 quads
Really good build specs. Strap two of these on a backpack and enjoy your summer.
This "how to" will help so many people, thanks for sharing
thnks a lot for all detailed information. im thinking to do my own first FPV Drone, Great video!!! Thanks a Lot
I am currently doing this exact build. Waiting on Part 4.....
What battery do you recommend for this build?
hi! what's the "effective range" of this setup?
hi, what is the flight time on this build?
When are you doing the low budget one?
Can you maybe make a video how to connect the goggles to the drone ??
Great series man! The intro was so cool love the song at beginning, where can I find it. It wasn't in the description or has been moved
As always very useful, I enjoy it very much, Thank you .
Thank you for such detailed video. I have one question regarding propellers. Which propellers do you recommend for this build?
Please suggest me the cheap best transmitter/controller.
is this footage from the small camera or the gopro
just completed my build the other day and based it off this bar a couple of parts
This is my fav. Series oml
What kind of battery would you recommend, if you are carrying a camera and if you are not?
What camera did you end up switching in place of the Runcam from this vid / what would you recommend as a better alternative?
Which gamble would you add to this build?
Hi...could you suggest any alternative to the fpv camera ? From your comments It seems like Is the only piece you would like to change
I tried to configure according to your video although preview responds according to the remote control. However, the motor does not spin, even though I am able to control motors using app.
I have configured the flysky transmitter and the receiver with the speedy bee F7 stack. In my Flight controller there are 4 pins for receiver (GND, 5v, R2 and T2). What should I do and what is the problem?
Just finished building this fpv drone but I'm struggling to connect my fatsharks with rapid fire to the vtx on the drone!! Can't find any info on why it's not working. The vtx signal doesn't seem to show on the fat sharks and I really don't know why?!! All soldering is correct and drone works perfect in every other way. Any info would be a great help!
I just built it but I have a dinky 1100 mah 4s on it. What kind of battery would you recommend. 4s for my novice skills seems more than sufficient. How many grams should the battery weight max?
Oh by the way I live in England and it's nearly always wet here. As a noob I am landing in wet grass. Have you ever used anything to waterproof the electronics? Is it even possible?
i use conformal coating ,have a search on here for it theres a few videos about water proofing your quad
In terms of part quality and flight characteristics, how do you think this would compare to iflight's bnf nazgul5?
What Rush Cherry Antenna should I buy? LHCP or RHCP?????
can u also suggest a google for the build and teach us how to bind the googles to the quad?
Waiting for part 4. Keep up the good work
How do you slow down with this drone? I assume, since camera is pointing upwards, you always have to have it tilted and moving?
Can't wait for that tune video!
which battery do you use
Hi this drone trasmite the video in real time, how can I see the video what I have to buy.
How do you connect FPV goggles to the drone?
How do I know which props I can use?
Can u recomend a cheap google that i can use with this drone ?
What betteries did you use in this drone?
Can it handle a GoPro session on top of it ??
What about goggles?? I can't find it in description...
bit.ly/2YDi4q8
Why would you choose betaflight over INAV for a cinematic drone?
I think Google has your results mixed up
What props did u use? I cannot find them in description
My guess is Dalprop Cyclone T5045C
Top speed in cinematics drone?
Bro where you filming? Looks like getto/ole county side Missouri🤣
Can i connect it to an oculus quest 2 ?
Awesome video 👍. Good drone,where can I get the things that you have designed. Can't wait for the tune video.
How can I use goggles with this drone? And what goggles should I buy?
where is the part of binding goggles
????
awesome series! helps so much, thanks for the effort! would you reccomand another camera for this setup now? what about the Foxeer Monster Mini Pro. I found this in one of your old builds? thanks so much for helping out! :)
Damn, I wanted to see what the Real time camera view looked like.
what propeller was used in the video?
Ok, so I've been searching and searching for that 3d printed xt60 frame mount/holder. I can't seem to find it anywhere. What is that "thing" called?!?! Thank you in advance to anyone that might be able to steer me in the right direction 😎🤘🍻☺
its linked below
Can you please upload part 4
How fast can it go?
If this is supposed to be a cinematic FPV drone, then what's with the dizzying footage and fisheye lens?
Is the camera 4K I’m looking into building one of my own.
Beau Del Carlo depends on what camera you will use. The gopro is.
Is there a reason why you have a capacitor on the xt60?
i believe its so he can use a larger battery like 6s
What is the song in the first 20 seconds called
th-cam.com/video/Q0Y2KMx3_44/w-d-xo.html
th-cam.com/video/hspFijCQ1Tw/w-d-xo.html&ab_channel=CloudKid - that's the actual one
Nice build... Could you do the same but ultralight 4''? :)
Where is part 4
I need to learn how to tune one of my quads drops to the ground out of control if I try a full roll left or right
Airmode?
Yes airmode
@@godsun358 hmm. It seems like it airmode I've only been in this a year and my first quad hit the snow quite a bit cuz I wasnt sure how to use airmode. You got it on a switch or turned on in config?
It's on in beta flight no switch
@@godsun358 and your quad only falls when you try an flip and roll? Are you on bf4.1?
don't know what happen, part 4 was never produce. I know he broke it, but he could use another one to show how pid tune is done
Please... Want 100$ freestyle build.... 2020 version
You didnt told how to connect fpv goggles with drone
Props are heavy and bulky and thus boost prop wash a lot
Do a give away 🥺
Hi you are great
I wish I had a buddy like you
I love your area
It's the best for development and manufacturing
I imagine hover boards like in the movie Back to the future?
The movie also did predict Obama as president in the 50s
I thus know the hover board is true however who gets to build it
I am on a budget and would like to build my first fpv quad
Please can you assist me
I know your experience is a real cost saver
I live in the UK however we can begin on wats up and email
I hope I do have certain skills you might almost like
I am an artist both instrumental and literature including design
I don't mind building a basher first because I know I will crash as a beginner however my experience after would help me build even more complex units
I am also a programmer and chef
I know I should be comfortable with all I know however prejudice is my reality
A budget starter kit and the right sellers will be appreciated
Sincerely 💕 Ejike
Is this bang good site legit??
i bought a couple times from them i am on the US most of they staff is shipped from China with whats going on with Covid19 not sure how long it will take or if they shipping.
Give me this 😢
How do i connect the goggles?