Just had mines delivered today and i just took down to my local Walmart about 1 mile away from were i live and that was the most fun i have had in a long time.
for those wondering wat the code is, if 9921 doesnt work then it is 1500 then press n hold power button. the 2nd code worked for me and i was confused cuz theres literally no info about this in the manual
I just bought my Mantis base version for 1,490(coupon). My first electric scooter. Upgrading from a regular skateboard lol will ship in 3 days and will arrive with in 3 to 5 days. Will be selling some tech I don't use to get my money spent back. You are all awesome. (:
Thank you for this video.. so helpful especially the part where the settings are wrong I changed all my settings to what you have here in this video and let’s see how it all goes ... I will add more when I get up and going
Thanks so much for your informative and easy to follow video! I have the Kaabo 8S and I was wondering how to disable the electronic brake, as the manual is next to useless.
should have bought one from us with a proper manual :) We don't know that specific model but if they come with the same display, the P-settings should be in the same place...
@@fluidfreeride Is there a way to reset these settings back to default? Or do you know what the default p setting for the tire diameter of the Kaabo 8S is? I accidentally changed the number and I cannot remember what it was originally set to.
P2 should be set to 30 for Mantis 10 baseline. If you set it to 20 (like I did after watching this video) the speed and km distance is displayed incorrectly. If you set P2 to 20 then 30kph becomes approximately 40kph and distance travelled goes up at least 50%
Ii have an Evercross H2 and ordered a compatible size and voltage as my old one. When I replaced the Battery and charged it up, It did not run as fast as before, Like 1/3 power was gone. Then I thought I would re install the old battery to see what the difference actually was and now It did the same thing when i reconnected it. I have two of these scooters so I compared the settings between both P settings and they are still the same. There must be another setting that was lost when the power was removed. Do you have any Idea?
So, me and a friend both have the Mantis 10. Unfortunately my scooter does not charge where as my buddy's does. I tried his charger on mine and still nothing??
Hi, can I please have your advice on 4:55. I bought used one, and the setting for controller shutdown was sitting at 40ish... when I changed it to 53, the battery bar dropped to empty and blinking. Any idea? Thanks.
Oh, additionally, question: My brand new Mantis 8 was ordered direct from Kaabo and has dual 500W motors. Are the settings discussed in the video still appropriate for my model?
i have a kaabo mantis 10 base and when i hold down the power and mode button it bring me to this page with the number 5 and 4 digit selection, but how do i go to the "p" settings?
On both my scooter (mantis 8 and 10 lite when i press the 2 buttons to enter p mode i just see “50” and only thing i seemingly can do is put in 4 numbers? Can you help please?
I have a mantis base model and the P2 setting was set to 30 when I got it and it says default is 30 in my manual... your saying to set it to 20 and that the manual is wrong?
Ben Pitchford Did not find the video, but did they send you the instructions via email? Or I think it’s on their website. What you do is hold down both power & mode buttons to get into the advanced settings
Is it possible to remember the gear when turning off the display? My always start with 3rd gear and I must always set it to 1 for example after turning on the display.
Your display has a few additional settings but functionality is the same. Check your user manual or contact our support team I. Case you bought from us.
Good evening! I recently bought Kaboo Mantis 10 Base 18.5ah 60V, not professional. I used it, there is no manual, I found it on the Internet - it did not help. Such a scooter for the first time, in the display settings it is indicated that the scooter turns off at 53V. Today it was 58, I was driving and turned off on the go, although the charge remained, how to solve this problem? If he turns off on the Chinese Kugoo M4 pro because he can no longer drive, then he immediately cuts off. I had to walk home. What is its minimum voltage, if max 67V. Thanks! And it does not show the speed correctly, in the manual in the P2 motor magnetic pole settings - you need to specify 30, but it does not show correctly anyway.
if you bought this scoter from us, please reach our to our support team. Since it did not come with a manual, it probably was not from us. Try 20 for P2. the 53V display setting is not the actual cut off but rather a setting that governs battery bars in the display. the lower you set this, the more charged your scooter shows. actual cut off for these kaabo controllers is under 50V. kaabo keeps changing this all the time. It should also not just shut off but rather reduce power to avoid shut off. best recommendation is to contact your place of purchase.
@@fluidfreeride just answer - is it normal practice that such scooters have a self-shutdown? (Only have Kugoo m4 pro) and the second is what parameter to put in the voltage? Mantis 10, 48,50V? What’s his minimum?
Hi great video👍 can you help me I have got a Kaabo x plus but can’t seem to get into the set up to change kmh to mph. It comes up with S0 or 50 and has 4 -?
I just bought a mantis pro. I held the power and mode button to bring up the setting screen. It however just shows S0 with 4 dashes underneath it . I am unsure how to get past that
My voltage ting says fully charged 5.85 I don’t know when it cuts off only happened once lucky and I don’t want to let it get to that point again Does anybody know the voltage it would
When will somebody update the display to use words instead of one letter and one number? It would require multiple language options so maybe that’s why...
have a problem with this display when I turn on this screen appears with 4 0000 and I cannot make it work because I do not know the code can you help me please?
Hi from Australia. I have the LT01 on my wolf X. I have noticed that this error keeps popping up E10 but I don’t know why. Can find much out there. Any advise. Thanks mate
The default p-settings for the Mantis 8(!!) should be in the manual. P0: Tire diameter (8 = 8 inch, do not change). P1: Low voltage limit, default set to 43V, This setting only influences how voltage is translated to the battery bar display. P2: Motor magnetic pole setting (Default 20, do not change).
@@fluidfreeride thanks! So useful! Nop, the manual that comes I seize the box it’s like a kind of regular one, seems like show me for a general version or idk. In P1 recommended me 53, not less than 48, and it’s kind of weird cause the base voltage, I understand, that it’s 48v, so it don’t make sense a lot to set the “0” percent battery at nominal voltage...
Don't got a Mantis, but still interesting to watch... "You have to kick the scooter before pushing the throtle" So wait... I need to hit the scooter to make it go? DAAAAAAAMN!!! Gotta go all savage on him huh?
haha!! this is a brushless motor why overheating in up hill? they use the dual motor if you want smooth ride in up hill but they not to overheating.. if they can do 1 motor they do
Hi, I'm reaching out to as many people as i can. I have a mantis 10 DUO 18.2AH 60V scooter SN KBTL121120082331. I'm trying to find a wiring diagram for these two black ESC's (controller boxes) but no one can help me so far. Is there anyone here that could maybe supply me with a photo of how the connects are all set up? or a diagram or anything. I have tried the manufacturers and many stores. No one can help me so far.. Please if anyone has the model with the two black controllers can you please please help me with a photo or anything :( I beg you.
Just had mines delivered today and i just took down to my local Walmart about 1 mile away from were i live and that was the most fun i have had in a long time.
for those wondering wat the code is, if 9921 doesnt work then it is 1500 then press n hold power button. the 2nd code worked for me and i was confused cuz theres literally no info about this in the manual
+++ The most useful info here!
Thank you 😩 1500, worked for me
Same here, 1500 worked for me, thanks! I could finally enable the cruise control.
For me 5252 worked.
I just bought my Mantis base version for 1,490(coupon). My first electric scooter. Upgrading from a regular skateboard lol will ship in 3 days and will arrive with in 3 to 5 days. Will be selling some tech I don't use to get my money spent back. You are all awesome. (:
I love the way this dude says "the scooter". Well done!
Thank you for this video.. so helpful especially the part where the settings are wrong I changed all my settings to what you have here in this video and let’s see how it all goes ... I will add more when I get up and going
I watched this and I don't even have a mantis... I have a problem.
But hey, nice vid! Very well done.
me tiher lol. skywalker 10s
I have the zero 10x 3weeks now , no complaints so far.
What kind of range are you getting from it?
About 35km but still have about 25% battery after that, average speed of about 30kmh, I have the 18ah 52v model.
Thanks so much for your informative and easy to follow video! I have the Kaabo 8S and I was wondering how to disable the electronic brake, as the manual is next to useless.
should have bought one from us with a proper manual :) We don't know that specific model but if they come with the same display, the P-settings should be in the same place...
@@fluidfreeride Is there a way to reset these settings back to default? Or do you know what the default p setting for the tire diameter of the Kaabo 8S is? I accidentally changed the number and I cannot remember what it was originally set to.
@@theslicefactor5326 set it to the size of your tires.. 8/8.5 inches should be 8 and 10 inches should be 10 etc...
Kaabo changed P7 setting in the newest revision. 1 = strong 0 = soft
Thanks can confirm on my mantis 10 changing this to 1 makes a massive difference, no lag and instant throttle response
in my kaabo mantis 8 origin is 0 soft 1 strong
I didn't know how to set this thank you. To each their own on their settings. I want to set mine on zero. I like a rocket take off. Thanks again.
your are the greatest person bro. this helped me so much. thank youuuuuuu 🙏🙏🙏🙏
Good quality product. Correct, fast transport service.
Great thanks from Australia
What do the warning lights stand for like the blue headlight emblem
Thats a good question i also trying to find out what the light is for too
@@jasontan8902 did you find out
@@jdqoqownenx it is switching to high beam
Nice! Thanks for this, I'm new to scooters and my Kaabo came with vague instructions.
P2 should be set to 30 for Mantis 10 baseline. If you set it to 20 (like I did after watching this video) the speed and km distance is displayed incorrectly. If you set P2 to 20 then 30kph becomes approximately 40kph and distance travelled goes up at least 50%
so what settings should there be for Mantis 8 ? I read in user manual 30, but was settled as 20 from factory..
@@IvanKrakow My manual says 20 for Mantis 8 and 30 for Mantis 10
The Mantis 10 Base (Duo in Australia) says P2 is 30. Why do say it should be 20?
Is there any damage to the motors by selecting the incorrect setting?
In 10S manual for P7 is written:
0 - soft start
1 - power start
Same in my 8s manual. But all the online videos and tutorials say the opposite 😢
Hello there. Thanks for the video. But i don't understand how I can disable the initial acceleration.
Ii have an Evercross H2 and ordered a compatible size and voltage as my old one. When I replaced the Battery and charged it up, It did not run as fast as before, Like 1/3 power was gone. Then I thought I would re install the old battery to see what the difference actually was and now It did the same thing when i reconnected it. I have two of these scooters so I compared the settings between both P settings and they are still the same. There must be another setting that was lost when the power was removed. Do you have any Idea?
Did you find a way to reset the mile marker?
Great video !!
That's awesome presentation. Congratulations.
The usb is a sneaky one i never knew about it until i watched this vid, could you plig in usb led rgb lights?
How can my scooter go all way to p15
Kaabo mantis solo 10 standard spec list?
How do you change kph to mph
My fully charged mantis 8 base scooter has V 53.7 . What does that mean? I bought it used
So, me and a friend both have the Mantis 10. Unfortunately my scooter does not charge where as my buddy's does. I tried his charger on mine and still nothing??
how hard do you have to kick it to get it to start.
P1 setting recomended to kaabo mantis 10 one engine battery 48v 18.2 ah ?
How i can enter in the second menu ? PA / PC ?
Hi, can I please have your advice on 4:55. I bought used one, and the setting for controller shutdown was sitting at 40ish... when I changed it to 53, the battery bar dropped to empty and blinking. Any idea? Thanks.
can you tell me the p sitting for the mantis 1500w limited
Oh, additionally, question: My brand new Mantis 8 was ordered direct from Kaabo and has dual 500W motors. Are the settings discussed in the video still appropriate for my model?
Yes it is
i have a kaabo mantis 10 base and when i hold down the power and mode button it bring me to this page with the number 5 and 4 digit selection, but how do i go to the "p" settings?
My P2 Setting was 30 ???
In P2 i vam only choose 00 20 30 or 88 ther is no 40 option...what do you advice ( mantis plus 2022 model )
my mantis base just arrived anyone know ideal tyre pressure? wheel says max 45 psi, my uncle says he uses 30. help
Same for Kaabo 8h thank you!
Kaabo mantis 500w sport is a base model right? i have a problem with the magnetic they said 40 but i can’t see 40 in the settings. please help
My P2 setting was set to 30... your saying I should set it to 20??
I changed p1 and I don't know if it was configured at 53 v or 43.5 v my skate is kaabo mantis 8 origin (52v 18.5 ah battery)
What about mantis 10 v2
On both my scooter (mantis 8 and 10 lite when i press the 2 buttons to enter p mode i just see “50” and only thing i seemingly can do is put in 4 numbers? Can you help please?
Hi there - please try 9221
@@fluidfreeride it doesnt work. ive this this and nothing happens
Newer models code is 1500
In P8 you are probably wrong. I've checked scoot on a hill and it doesn't seem as regenerative braking but braking only, battery doesn't charge
is there anything else that u could do with the usb port exept charging your phone ?
it is for programming the display
I have a mantis base model and the P2 setting was set to 30 when I got it and it says default is 30 in my manual... your saying to set it to 20 and that the manual is wrong?
how fast dose it go when you put that p9 setting to the lowest in km/h thank you :)
Thanks 🙏🏻❤️🛴🇧🇬
My mantis when I try to go to advanced settings, it says "50" followed by 4 digits that I have to set. Is this some kind of password or something?
Code is 1500 on newer models
Hi my leds from the bottom is not working how do I fix it
Is there any mobile Bluetooth app with mobile
I replaced the controller with LT01 which was the orangil one that came with it can you help down on power
Is this display the same on Horizon?
I don't get those p settings when I hold power and mode. I only get a display that says "50"
same for me. there was a vid that says the passcode is 9921 but it did nothing for me???
Code is 1500
Can you guys create a video for the Horizon display?
No kidding...did u ever find a video?
Ben Pitchford Did not find the video, but did they send you the instructions via email? Or I think it’s on their website. What you do is hold down both power & mode buttons to get into the advanced settings
Is it possible to remember the gear when turning off the display? My always start with 3rd gear and I must always set it to 1 for example after turning on the display.
Yes
i have a 60v scooter, at what percent should i charge it again? tia
Why the red triangule appear when i riding there is any malfunction with the engine?
brake sensor issue. head over to support.fluidfreeride.com and search for "sticky brakes"
Is there a way to reset all values to factory settings???
There is not since factory settings always differ by scooter model. You need to check with your dealer on defaults.
I kindly ask you how you can delete the password 9221 to enter the menu. I see that you don't have the password. thanks
Unfortunately the manufacturer added this in the programming some time ago. There is no way to remove it. Sorry about that.
Did you know how to get the password???
I have a mantis lite it's only running at 26mph can you help please
how to set QS-S4 to P0-P9 settings? mine, is P1-P20...
Your display has a few additional settings but functionality is the same. Check your user manual or contact our support team I. Case you bought from us.
On mantis v2 9o 10 makes it read 10mph faster then im actually going
Good evening! I recently bought Kaboo Mantis 10 Base 18.5ah 60V, not professional. I used it, there is no manual, I found it on the Internet - it did not help. Such a scooter for the first time, in the display settings it is indicated that the scooter turns off at 53V. Today it was 58, I was driving and turned off on the go, although the charge remained, how to solve this problem? If he turns off on the Chinese Kugoo M4 pro because he can no longer drive, then he immediately cuts off. I had to walk home. What is its minimum voltage, if max 67V. Thanks! And it does not show the speed correctly, in the manual in the P2 motor magnetic pole settings - you need to specify 30, but it does not show correctly anyway.
if you bought this scoter from us, please reach our to our support team. Since it did not come with a manual, it probably was not from us. Try 20 for P2. the 53V display setting is not the actual cut off but rather a setting that governs battery bars in the display. the lower you set this, the more charged your scooter shows. actual cut off for these kaabo controllers is under 50V. kaabo keeps changing this all the time. It should also not just shut off but rather reduce power to avoid shut off. best recommendation is to contact your place of purchase.
@@fluidfreeride just answer - is it normal practice that such scooters have a self-shutdown? (Only have Kugoo m4 pro)
and the second is what parameter to put in the voltage? Mantis 10, 48,50V? What’s his minimum?
Hi great video👍 can you help me I have got a Kaabo x plus but can’t seem to get into the set up to change kmh to mph. It comes up with S0 or 50 and has 4 -?
Mph/kmph is usually the 4th setting.. He shows it on here about halfway through the video.
Try 9221 and hold power button
super
Why i cant go to the p setting
WHEN I DO THTA I SEE 50 CAN YOU TELL ME HOW TO MAKE IT FASTER
Mine does not allow me to get in to settings asking kind of password
9221
@@microsoft1665 ouww shii now we rolling thanks
To reset the odo you have to press and hold the adjustment button for about 10 seconds.
ES Rider hasn’t worked for me
I just bought a mantis pro. I held the power and mode button to bring up the setting screen. It however just shows S0 with 4 dashes underneath it . I am unsure how to get past that
ijarvez theres is a code for that one
Try entering this code (9221) & then long press the power button
same issue I had on my wolf base with LT01 display put the pin in 9221 then press power button 3 seconds and you will be in Psettings
@@562jamesj I just got Mantis 10 Custom, I put that code and nothig happened
charging my phone means discharging the scooter
What about in the Mantis X, which is 1500, what do you watch out for? Thanks.
Mantis X sounds like a custom model from a specific dealer. Ask them for instructions.
What’s error 07
Great info. Just sub
Hey just wanna ask some question what is the meaning of blue sign on lcd while im driving
I would like to know that too
My voltage ting says fully charged 5.85 I don’t know when it cuts off only happened once lucky and I don’t want to let it get to that point again Does anybody know the voltage it would
How fast is gear 1
20-25kmh
@@DarthGuitarman Can I change gear to make it less max speed?
I did not understand about p3, what is that?
When will somebody update the display to use words instead of one letter and one number? It would require multiple language options so maybe that’s why...
have a problem with this display when I turn on this screen appears with 4 0000 and I cannot make it work because I do not know the code can you help me please?
please try the code 9221.
whats the name of it
not sure what you are referring to, but this tutorial is about the standard display of the Mantis base (17.5Ah).
Code for setting is 9221
Mine didn’t shoe p2 menu , why ? , helpppp😪
When I’m p5 I want to change it to 0 but when I try to change it just changes to p6 or p4 anyone help me please
When I enter p setting my display shows 50 not p0 ???
Call your dealer to get the four digit code to unlock.
the code is 9221. Same code for all the Manti. I had to call FFR to answer the same question.
When I try accessing my P settings, it goes into an SO mode? What is that?
you hopefully got an answer from support on this. enter code 9221 and long press power to access.
@@fluidfreeride i have the same issue , get to SO Mode , put in 9221 , hold power dow and resets the number, doesn't go into P-Mode
@@bobbyhooper6728 please contact our support regarding this (support@fluidfreeride.com), thanks!
@@bobbyhooper6728 did you get it sorted i got the same problem with mine
@@fluidfreeride I just emailed you guys as well I have the same issue
Mine is asking for a password to change the P settings, does anyone knows the access code.?
1500 on newer release models google is my friend!
Someone knows the error code 08 on the screen what that is?
Hi from Australia. I have the LT01 on my wolf X. I have noticed that this error keeps popping up E10 but I don’t know why. Can find much out there. Any advise. Thanks mate
How TO START CHARGIN THE BATERY? IS BETTER LOCKED?
bro i had my mantis 48v 13ah on 42.5 default. i lowered it to 39. is this ok?
has yours worked okay doing that?
@@cameron09100 yes. im not happy with my scooter. just getting 10 km range :(
Hi guys pls help me ido the code9221 and it not giving me to go in the settings
Like its not giving me to enter the settings
Like i do the code 9221 and its not working
try 1500
@@brrs497 9221 and then hold power button
Did you fix it? I have the same issue
What's the default configuration for the 18,2ah 48v and 8" wheels in P0, P1 and P2?
The default p-settings for the Mantis 8(!!) should be in the manual.
P0: Tire diameter (8 = 8 inch, do not change).
P1: Low voltage limit, default set to 43V, This setting only influences how voltage is translated to the battery bar display.
P2: Motor magnetic pole setting (Default 20, do not change).
@@fluidfreeride thanks! So useful! Nop, the manual that comes I seize the box it’s like a kind of regular one, seems like show me for a general version or idk. In P1 recommended me 53, not less than 48, and it’s kind of weird cause the base voltage, I understand, that it’s 48v, so it don’t make sense a lot to set the “0” percent battery at nominal voltage...
When I push the mode and power button I get a SO or 50 screen. Any idea what I did?
Juan Pablo Juarez the code is 9221 once you enter it in hold down the power button
@@solexdragonz thank you very much.
Don't got a Mantis, but still interesting to watch...
"You have to kick the scooter before pushing the throtle"
So wait... I need to hit the scooter to make it go? DAAAAAAAMN!!!
Gotta go all savage on him huh?
if you kick to hard he will kick back.
haha!! this is a brushless motor why overheating in up hill? they use the dual motor if you want smooth ride in up hill but they not to overheating.. if they can do 1 motor they do
Hi, I'm reaching out to as many people as i can.
I have a mantis 10 DUO 18.2AH 60V scooter SN KBTL121120082331.
I'm trying to find a wiring diagram for these two black ESC's (controller boxes) but no one can help me so far.
Is there anyone here that could maybe supply me with a photo of how the connects are all set up? or a diagram or anything. I have tried the manufacturers and many stores.
No one can help me so far.. Please if anyone has the model with the two black controllers can you please please help me with a photo or anything :( I beg you.