Everything You Need To Know About your Apollo LCD Settings (Tutorial)
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2024
- Tyler walks you through an easy to follow guide on how to use your Apollo Scooter LCD screen and settings.
If there is anything we forgot to cover, leave a comment below.
P1: lcd brightness
P2: miles/kilometers
P3: voltage (depends on scooter)
P4: hibernation timer
P5:
P6: wheel diameter
P7: number of magnets on the motor (don’t change)
P8: limitation on power
P9: kick or zero start
P10:
P11: electronic breaking 1-5
P12: soft or high acceleration 1-5
P13:
P14:
P15: cut of voltage (don’t change)
P16: zeroing the km counter
P17: cruise control (on=001)
P18:
P19:
P20:
As always, if you have any questions or concerns, get in touch with us via email or phone.
E. contactus@revrides.com
P. 360-888-7433
Stay in the loop:
Instagram: REVrides_official
Facebook: www.Facebook.com/REVrides - แนวปฏิบัติและการใช้ชีวิต
Zero 10x LCD settings
P1: lcd brightness
P2: miles/kilometers
P3: voltage (depends on scooter)
P4: hibernation timer
P5:
P6: wheel diameter
P7: number of magnets on the motor (don’t change)
P8: limitation on power
P9: kick or zero start
P10:
P11: electronic breaking 1-5
P12: soft or high acceleration 1-5
P13:
P14:
P15: cut of voltage (don’t change)
P16: zeroing the km counter
P17: cruise control (on=001)
P18:
P19:
P20:
Thanks a LOT for the information. It helped me a LOT💯💯💯
Thanks for the info 😊
I can't get the accelerator to go, what settings do I use
Hi, difference from A and d if you press red button for 2 sec?then p15 voltage setting of mine is 39!it s ok?zero 8 41v 10Ah, thank you!!
Is the settings same on 8x?
My man! This is exactly what I was searching for. Clearly explained and easy to follow. Just set mine up as u recommended. Legend! Cheers!
what if my settings won't save?
You're very tall or the scooter is very small? 🙄👀🤷♂️
Hi i would like to set
P11 and P12 to 5 (electronic breaking and acceleration ) is it can harm the z10 motor or the battery?
Hi Boris, You can definitely up you braking and acceleration! Ride Safe!
Number 8 Power Settings on my 11X only go down to 45.
It's still too fast on take off.
You have to go to P12 in settings and set it to 1,2 or 3. 5 is the fast take off.
Thank you for the outstanding job you did in this tutorial.
You didn't mention USB port, on the Zero 9."on left hand side of the screen" Thanks for the smile,
That's for charging usb devices
@@siiil21 yes it's a charger, only seems to work while your on the scooter and not all zero scooters have them.best .
Mines different. I don't have a p8 it just goes from 7 to 9 and I don't have a few others. It jumps to 99. Im confused
You may have a different LCD
hi, im running two motors and another controller weith this, but I cant work out how to get the speed signal over to the 2nd hub, usually I'd take the signal from a 5v throttle, can this be done
They should read together
I have a winner sky E10 off-road but it only has a few of the settings unlike your video
i just watched
They may be using a different LCD.
My battery on mine always says it’s fully charged any suggestions?
Make sure your P3 is correct for the voltage of your scooter. 48, 52 or 60
Its tha same to X10 too ?
Yes but the setting will vary per scooter. Be sure to look at your guide for exact specifications.
Finally I found a video explaining this. I probably have everything screwed up right now
Is this the same on kugoo m4
Why won't my error 10 stop blinking I've tried everything
Next would be to try replacing the lcd wire.
Hi, i have a question, when i enter the P settings and long push the on/off button, the letter ''A'' on the bottom left changes to the letter ''d'' And I wondered what it does... so if you know please tell me :)
any informations now?
i dont think there is any change with a or d
Hello, from Colombia.
Is this screen and the entire scooter waterproof?
Does the scooter resist use in the rain? Here in the tropical zone, it rains a lot. And we want to know if they have damage when driving in the rain
Gonzalo Gabriel Gonzalez Cano I have an 8 and it says do not use in wet conditions,
but I saw a video of someone attempting to make theirs waterproof with some silicone or something
I want to try it out
Would be really nice if it was water proof out of the box
Yo también soy de Colombia, que tipo de scooter tiene? En general es mejor que ninguna las meta al agua ni siquiera en lluvia o charcos, siempre se terminan dañando aunque digan que son IP54 de resistencia al agua y polvo
When i set P9 to push to start mode, it is ok until i turn unit off then back on it reverts to 0 which means when you touch the throttle it wants to move, any ideas, Thanks.
Try doing this again and after changing the setting, back out of the settings by holding power and mode. Then the setting should save. If this does not work contact us at service@revrides.com . Safe riding!
Thank you REV Rides, solved my problem, 😎👍
I don't have P8 power level. But the P15 is 100. By any chance the power level is P15? Then again i don't have Cut off voltage. Kindly advise.
So how do i set a complete Max speed on my Zero 10X to a complete Max of 30 kmph no matter what gear I’m in?! I’m tired of having to manually keep the speed down with police around
Ii have an Evercross H2 and ordered a compatible size and voltage as my old one. When I replaced the Battery and charged it up, It did not run as fast as before, Like 1/3 power was gone. Then I thought I would re install the old battery to see what the difference actually was and now It did the same thing when i reconnected it. I have two of these scooters so I compared the settings between both P settings and they are still the same. There must be another setting that was lost when the power was removed. Do you have any Idea?
Thanks, man!........I really needed that video......I just bought a Zero 10 and was already trying to figure out all the panel control settings
Good evening, how to remove security please because I have to go with it to work thank you for responding quickly.
Hello, my scooter only moves when I push it, can you help me
Hello please contact service@revrides for assistance!
Why my battery meter shows empty even when my battery is full
Help please
@@carlamor323 Hey Carl, I would check that P3 is set properly for your scooter. This is the nominal battery voltage (ZERO 9 = 048)
Hey! Thank You for the information!
But unfortunately I didn’t find what I need, my LCD display doesn’t show my battery right, just full or empty, any configuration for this?
Cheers
Please hero x8 setting p15 voltage 40.41.42 ??? Someone has sabotaged the settings
Scooter 52v23a
Controller 52v cut voltage 40v
What does it mean when u get an E 10 error on your screen? I have a brand new scooter, got not even a quarter of a km, and then got the e 10 error, the company is sending me a new throttle, they say this should resolve he problem, i hope so. I paid almost $3000 for a 1/4 km, that's pretty steep!! lol. I feel as though I already waited so long, now this!
Hey Todd. Please update me if you get this fixed. I have the same issue and it is proving difficult to get fixed.
i bought now new one..but why not working the accelerator but the power is on .iys not running .can u help me whats the set up to accelerate again
It is possibly on kick start. If so, you will need to kick off i order for throttle to work. If you want to change that setting, P9 will let you enable/disable it.
I would like to limit my Zero 10 speeds from gears 1=28kmh 2=45kmh 3=50kmh to 1=28kmh 2=35kmh 3=45kmh. Is that possible?
What does e 07 mean? If it’s flashing on the screen
Hey Adam, Error 07 is a motor fault code. I would suggest checking the wiring where is enters the motor at the axle. A fault in the wiring harness is more likely than an issue with the motor internally.
Mine does not have most of them it’s only a few of them numbers
Thank god for this video🙌🏼
You said 17 is for cruse control then you said 17_18_19_20 are not used........i understood though great video thanks
Oops :)
Does this video only pertain to yoo or ur brand of scooter?? Just bought an EVERCROSS H5. And only have like maybe 6 P-settings
Hi there , how long before an app like the xaiomi 365 has ? It tells so much useful info even individual parallel cell voltage . a xaiomi bms could be piggybacked and then many of the app functions will work.
Robinson Kevin Taylor Ruth Walker Timothy
How to reset all settings
please the PAS is not working with this controller ? what is the reason , i used 3 different pas and not working , thank you
I have a 60 volt scooter. It came set at 31.5. Do I wanna set it at 60?
It depends on what model and lcd you have
@@RevRides360 I see. Never mind. It’s Under voltage cut off to protect your motors from under voltage. If you let it rip while your 60v scooter is under 48 volts bad stuff can happen. 31.5 is a example the users manual gives. And I’m seeing riders setting theirs to 31.5. Their scooter won’t last long lol
@@RevRides360 I’ve had a lot of scooters, the Fieabor Q08p is the probably the best thing that happened to the scooter community, for $1300 the force behind this thing is INSANE
hey my zero 8 only charges max up to 4 out of 5 bars and =50.2V. I'm talking when the green light on the charging brick turns green. So is it blocked to max 80% charge to preserve the battery life?
Make sure and check your p-settings are correct
Tried. these setting on a iENYRID M4PRO S+ and it does not work on every setting. Unless I did something wrong. Thanks
Hello, can someone find out which percentage of P08 gives what km/h at gear 1,2 and 3
Hello. When I am not accelerating I slow down pretty fast. Is their a way to turn that off so I can cost with out using up power?
P17 set to 1 should set cruise control!
Perez Elizabeth Davis Charles Gonzalez Lisa
Io ho questo computer qs-s4 e monto una batteria Lg 72v 32ah monopattino zero11x P03 - Voltage level of machine 72 giusto ? e P15 - Controller cutoff voltage?
Lopez Jeffrey Allen Jose Gonzalez Matthew
Hello i have my techlife x7s scooter and batery when was new i was going around 50 km.. Now i see how is drain faster now i can go only 40 km... I done on it 3700km..... So my battery gonna be more bad till it die or i will gona have only 10 km range at end?
Thomas Margaret Jackson David Lee Karen
What if the display doesn’t turn on?
is there a setting for battery percentage? I have a scooter with the same Indicator panel, I run about 25km still the battery indicator is still full charge, but then suddenly it wont start and i quess its low bat. is there a way to calibrate the battery bar or percentage?
How can I make it auto gear 3 when i turn it on
when i turn it on it is always on 1¨
Unfortunately they are always set to 1
Ok:)
How i can save the setting’s,mine allways from the start beginning?
I was going to my friends house and when I was going to my friends house, my scooter died right in the middle of the street and I was walking at home. And I cannot even find the battery level because when I turn on my scooter, it’s always fully charged, but it never decrease,
I was going to my friends house and when I was going to my friends house, my scooter died right in the middle of the street and I was walking at home. And I cannot even find the battery level because when I turn on my scooter, it’s always fully charged, but it never decrease,
Robinson Shirley Smith Kenneth Harris Gary
Martin David Brown Sandra Lee Melissa
Hey mate solid video, my speedo isn’t accurate and I’ve done the wheel size to 10 and that’s all good but I’m going 30mph and it says I’m going 3mph just really confused done all the research but I can’t find anything. Thanks
May someone helpe you
Davis Maria Jones Timothy White Timothy
Poland?
Clark Angela Johnson Karen Davis Deborah
beaster scooter bs68 My Spidometer is wrong do you know how to fix that?
what would make my ebike take off as soon as i power on the ebike without the throttle being engaged and the throttle dont work when i do engage it
Unfortunately I crashed and now its playing up. Just wondering if there is any way of reseting the controller.
Can you please explain what p8 actually does? Limitation of power how and why if there’s another parameter for 1-5 setting for acceleration?
We are happy to help you with understanding the settings of the scooter. Please call customer service at 360-888-7433 for assistance
Clark Jason Walker Elizabeth Miller Barbara
Any idea how the cruise control works? Does it require to maintain a certain speed for the X amount of time or the accelerator to be held an X amount of time? I have the LH-100 and assuming its pretty much the same in this one but i havent gotten much sense of it. Certainly not 10 seconds. More like 5. Its just real weird since sometimes it seems to activate after like 4 seconds and sometimes it wont...
Thanks for reaching out! Feel free to reach out to Service@REVRides.com more information and assitance! Cheers!
Some P modes not appear on My settings like the 1st one, brightness set, just skip to P2, You know how to unlock or restore factory settings? Thanks
Hey, we have never seen that issue. Does your LCD say”QS-S4” on the front of it? Where did you purchase from?
@@RevRides360 my turbo lightning plus has a error code e07. I was going down a hill for a while and all the sudden the scooter wouldn’t work. Any suggestions. Thanks.
What happens if you change the amount of 🧲 magnets setting??!!
Earth's Poles Will Flip.
IIISentorIII 😂😂😂
Thank you so much, can’t wait to get one 👍
My Zero 9 comes Friday. Do you set the LCD up to your recommendations before you ship it to me?
Yes, of course. We set the LCD settings for all of our customers. This video is to help you with some of the settings you may want to change based on personal preference.
Mines change to miles then auto goes back to klm it's annoying had it 3 days now only done 36 miles need a place to ride out to and think will get new controller off am locked 🔒 😑 out of settings
Lewis Linda Harris Barbara Moore Linda
My scooter goes uncommanded when u turn it on and turbo mode and rake lights don't work
What is the 48v 500w rear motor electric scooter P15 voltage setting, please I changed it by mistake and now I don't remember.
39 Volts!
I think this thing might be broken on my zero 10x I made a video of what happened, what do you think, do I need a new throttle/display?
Contact your dealer and get a new LCD ordered. They are easy to install.
Lee Maria Robinson Joseph Johnson Laura
I got a new e scooter, it was fully charged. And then i changed the volts from 36 to 60. And after that, the battery sign on the screen keeps blinking and only showing 1 bar.
Do you know why that is?
Also mine skips over some settings in the p menu
The volts of your scooter cannot be changed in the LCD. The Volts are determined by the battery. Please set the LCD voltage to be the volts that match the battery in your scooter.
P11 shoud be turned off at all times because it burns the controllers out if ur battery is full or if ur going downhill so yea
Hello Rev Riders, hope everyones very well, just wanna ask maybe you happened to know about the default settings for Zero 10X, 52V, 23AH (P07 Number of magnets on the motor?) & (P15 what is the Cutoff Voltage? please let me know, thank you very much!
P07 = 28 magnets. P15 = 42V (some say 41V, depends on who you ask).
Thank you very much REV youre Awesome! more power to you guys👌👍👍
Is there actually any benefit of having kick start on or off? does it really make that much of a difference on battery life?
No but it will be sure the scooter doesn’t run away at a stop!
I just buy x1 pro v2 scooter but don’t know why can’t turn it on 🥺
Hi I try P16 to reset the KM nothing happen same KM show me it’s not 0 and now ?
Lol I bought mine from you guys (zero10 x 60v) and it came set to 48v and 8 inch tires
Is it possible to set up the speed to 25Km/H on this Escooter? (STREET LEGAL)
How do you change it to see the speed in mph? Mine shows KM
Pls help me to adjust the speed of my kaboo skywalker 8s
hey my p8 setting is locked it does not show up anybody know how to fix that
THe voltage setting.
I bought a used 10x that has the voltage set to 48. Does that make a difference? What is the diff between 48-52
Hi can anyone help with my 11X please? What exactly is the voltage cut-off and why is it set at 52 V when it's 72 V?? Unsure why and of the cut-off purpose. Also, what should the magnetic setting be set to and why. Thanks for your help in advance.
The “cutoff voltage” is for when the battery reachers 52v to save the battery so it doesn’t wreck the battery. If you haven’t changed the magnet settings they don’t need to be messed around with at all unless you have messed with them
Gear changing does effect acceleration
How exactly? I can't see the difference between any gears, but my dad says that gear 2 accelerates the faster
My display Is Er07 not emtry ti menu click Power and mode number 50 ----
Click 1111 Power Number 51 Is stop play Power return ti face km 1/2/3 and Er07 because?help me please
There could be a loose connection on your motor wires.
Thank you so much man I got my girlfriends scotter going so much fast it went from 19km to 32km thank you so much
Why my battrie pourcentage is allredy in full charge how to fixet to see real pourcentage batterie
not to sure
When you're on any P settings and hold down Power button, it toggles between A and D. What does it mean?
A for Ascending, and D for descending. This changes whether the setting unit increases or decreases when you adjust it with the mode button.
Is lh-100 same as this what u showing?
Are those settings the same for a Kugoo M4?
Try stupid man
Hello, I got the same scooter-same screen, anyways I have a problem in which the underlights when turning on the lights get purple, green and blue. Any idea how to fix it?
Hey! Sounds like there's an issue with the backlight on your display. Usually the throttle ends up needing to be replaced, as the backlight is not repairable.
I dont even have p12