Great guide, thank you. I really like the proportions for this blaster, more so than my Dart Zone MKII. So for my vanity, could I do this conversion without the brass barrel extending from the muzzle? How would a shorter barrel effect the gains in accuracy with the short darts?
Hey thanks a lot ! Glad you found it useful! As long as you have enough brass to create the sealed breech you can have the barrel as long or as short as you like, I have another brassed Knockout that has a much shorter barrel (pretty much doesn’t extend more than normal) and haven’t really noticed any loss of accuracy or power!
Uh do you guys have a video on the conversion kit wich is also sold by ak blastermod on etsy? Since it has a few handy 3d printed parts aswel as pre cut brass wich are also at correct thicknesses..
CJ Wiggins Hey man yeah K&S is where I get mine from, I think it’s about a tenner for 12’ of 9/16 and 17/32. If you use 6’ of each brass tube you have enough material for two mods! Definitely better doing this mod yourself! Some kits are very expensive and not as good. Hope this helps!
Zane Snyder Hey man thanks for the comment, so I use short darts which are more stable and accurate over long distances. Rival is much better than elite in terms of range and accuracy. But at really long range you want short darts.
any chance of some amazon links? everything is in mm when im searching.. thanks!
Great guide, thank you. I really like the proportions for this blaster, more so than my Dart Zone MKII. So for my vanity, could I do this conversion without the brass barrel extending from the muzzle? How would a shorter barrel effect the gains in accuracy with the short darts?
Hey thanks a lot ! Glad you found it useful! As long as you have enough brass to create the sealed breech you can have the barrel as long or as short as you like, I have another brassed Knockout that has a much shorter barrel (pretty much doesn’t extend more than normal) and haven’t really noticed any loss of accuracy or power!
@@foamflinger9521 guess I'm gonna have to build one then. Thanks for your response!
@@SethHershey Wahey do it! Only tricky bit is cutting the breech, and lining it all up, a worthwhile mod though!
Very helpful, great video! Can’t wait to give this a try!
Uh do you guys have a video on the conversion kit wich is also sold by ak blastermod on etsy? Since it has a few handy 3d printed parts aswel as pre cut brass wich are also at correct thicknesses..
Hey there I do have a video on the AK blaster mods kit! The kit is pretty good overall but you can get similar results without spending the money.
@@foamflinger9521 oke
nice guide.
Thanks! Such a simple yet effective mod love it
Hey there, was the brass tubing made by k&s? That’s the only company that I can find that makes 17/32 and 9/16 tubing
CJ Wiggins Hey man yeah K&S is where I get mine from, I think it’s about a tenner for 12’ of 9/16 and 17/32. If you use 6’ of each brass tube you have enough material for two mods! Definitely better doing this mod yourself! Some kits are very expensive and not as good. Hope this helps!
Foam Flinger Yes it does! Thank you so much
CJ Wiggins Check me out on Instagram and Facebook as well! We host nerf games at Beauchamp college Oadby:)
Why switch to darts?? Aren’t the rival rounds better?
Zane Snyder Hey man thanks for the comment, so I use short darts which are more stable and accurate over long distances. Rival is much better than elite in terms of range and accuracy. But at really long range you want short darts.
Foam Flinger gotcha, thank you for the reply!