How to Remove an Engine | Honda K-series
ฝัง
- เผยแพร่เมื่อ 26 ส.ค. 2024
- Here's how to remove an engine and transmission from a Honda Accord with the K24 4 cylinder engine.
Removing the engine or transmission is most easily accomplished by removing it as an assembly and then separating them outside the vehicle. This must be done if rebuilding the engine or transmission, or swapping them for an upgrade.
To remove the assembly the following items should be removed: shift cables, coolant and vacuum hoses, battery & tray, air box, wires connecting to the body, exhaust, axles, radiator and engine mounts. Once its clearly disconnected, the engine/transmission assembly can be lifted out the top of the vehicle with an engine crane / hoist.
Engine and transmission can be done with common hand tools that can be purchased here:
Impact Wrench:
amzn.to/3qO1r69 (US)
amzn.to/377Xguj (Canada)
Engine hoist
amzn.to/2W4FFgj (US)
amzn.to/3ngx5XW (Canada)
Impact sockets:
amzn.to/2IFrpaQ (US)
amzn.to/2JXognl (Canada)
Breaker bar:
amzn.to/377mCIF (US)
amzn.to/3nfHEdY (Canada)
Angled needle nose pliers:
amzn.to/3oNZo03 (US)
amzn.to/3oWImxd (Canada)
This car in this video is a 2003 Honda Accord with a 4 cylinder engine and manual transmission. Removal procedure should be similar for the Acura TSX and RSX, Honda CR-V, Civic, Element and Accord from the mid to late 2000's.
This is the Camera I use:
amzn.to/2Y24ixX (US)
amzn.to/2Yhb3eo (Canada)
Link to Etsy shop where you can purchase speedkar99's brother's socks, t-shirts or hoodies:
www.etsy.com/c...
Check out the speedkar99 Facebook page:
/ speedkar9
Check out the speedkar99 Linkedin page:
/ speedkar99
Follow speedkar9 on Instagram for behind the scenes coverage:
/ speedkar9
Subscribe for more videos just like this:
www.youtube.co...
![ง้อ (ALRIGHT) - FOURTH Prod. by URBOYTJ [ OFFICIAL MV ]](http://i.ytimg.com/vi/Qs8ZeV6Dqj8/mqdefault.jpg)
nice job on AC lines! Quick end environmentally friendly :))
Vey impressive,an entire engine removed in four minutes.
It was more like 6-8 hours of a Saturday
That's pretty cool seeing how an engine come out. Alot of connections to remember to reconnect :)
Thanks for the video
How to remove a Honda K-Series engine in 5 minutes! 😉👍🔧
Yep it's like they were meant for K-swap
@@speedkar99 How long didi it actually took to remove the engine?
@@Avalon491 not sure if you saw it since you posted this,
he responded that it took 6-8 hours for him to remove it in another comment.
man im so glad i dont live up north with all that rust, my civic would probably be the cleaning 160k car you will ever see lol
Watch today's mechanical Review and then tell me about rust
Florida, 2003 CRV here. Had it since new. Zero rust on the bottom/
It's a 6000$ whip at my local used car dealer. I love the color it's usually found on the magnificent Element.
Thank you for the video, my 04 Accord also have K24 and 5MT. Brought new and now almost 290,000km already. Just burn a litre of oil every 1200km. Not too bad.
These weren't known to burn oils like Toyota engines
Looks pretty simple. I like that extra hole to get the hood vertical so you don't have to remove it.
I loveeee my 2003 Accord EX-V6. got it from an old couple that babied it and maintained it it’s whole life. only had 150,000km when I bought her, in amazing shape 😍
Do you have the stick shift?
Liked before even watching. Quality content guarenteed 😀
I agree. The best videos on TH-cam.
Great video, clear explanation how to remove an engine from Honda vehicle. Thank you!
You are welcome. Probably s common thing now with everyone upgrading these to better K-series
I really think your video's are the best, because you hit every point. Thank you so much for teaching me.
Awesome! Thanks
A+ for realism. No one ever vacuums out the ac refrigerant responsibly 🙏🏼
🤣 I was wondering if to edit that out. In honesty the system wasn't full when I got the car anyway.
@@speedkar99 I ain’t no snitch🤣
@@speedkar99 That used to be a big deal with R12, is it still forbidden with the new stuff?
Great short highlight tutorial. Seems simple, I might monkey branch from toyota to Honda for my next project
Bruh…is that strap you used to pull the engine out a fukking seatbelt? You are LEGEND. 🙇♂️
“WE’RE NOT WORTHY!
WE’RE NOT WORTHY!”
😂 Bravo, son. Bravo. 👏
Can't wait to see a tear down video!
It's coming soon!
I have this exact same engine out of an 04 Accord coupe, even same exact color, can’t wait to see a tear down of what my engine would like inside!
I cant wait to look forward a mechanic review on new Honda cars
Your going to get a mechanical review on old Honda's before new ones! Video coming tomorrow
@@speedkar99 I love both. Can't wait to see them.
Now I only wish that removing everything as fast as this video!😁 Good stuff my friend as always!!!! Catch you later.👍
Yeah this took a day to do
Hi, good evening
Good morning
@@speedkar99 Hey there handsome 🤤
Awesome Video. That engine has seen more miles than the Voyager 1 and Voyager 2 space probes.
No...it only had 196,000km
Barely broken in.
My mom had the same generation Accord, and her engine got to 435,000 km. And even then, it didn't stop working; it got stolen by a meth addict.
Your channel is so underrated !
One day I'll make it
I have the exact car in San Marino red. Always garages. No rust and all the bolts still have the zinc plating. It’s an EX-L with 5 speed
That thing is in great shape!! 😯
It's seen better days
Can you remove the engine without removing the transmission ?
Appreciate the enormous effort you go through in bringing us car videos, thanks :)
Thanks. It sure is alot of effort working in the cold
@@speedkar99 beast
3:58 something I never know that Honda Accord has, the extra hood hole.
Most Honda have it.
Not the hybrid Accord
Yeah that hole is helpful
@@speedkar99 peeking holes are more useful for dirty handed guys.
I was thinking only the Germans had to have a dedicated service position.
That toothbrush throw was dope.
Something new to learn every time. Thanks
Yep, this was pretty straight forward
Like your videos, straight to the point, no filler
hell yeah thanks man. Might be getting a CRV 5 speed and then swapping a lower mileage engine in.
Good video , to the point
Glad it helped
So the ac has been drained? Anyways to pull the whole system without draining it?
You can leave the AC compressor in the car without draining it. This one had next to nothing left
@@speedkar99 thanks man, unbolt the compressor, got it!
Thanks for posting this!
I like your videos, they are very educational and interesting... Keep up the good work!!
Thanks
You make it look so easy.
It wasn't too difficult. Especially that the exhaust wasn't Rusty
Love your videos. Any chance one day you could make a video for newbies like myself getting into cars that just opens the hood and walks through what each of the things in there is and how it all fits together? Maybe throwing in some common maintenance/things to check? I'm an IT guy and my drea is to one day be able to open the hood of a car and understand it as well as I do opening a computer. If you already have made that please let me know! Thanks a lot.
Check out my Mechanical reviews. I point and explain each part of the car and how it works.
@@speedkar99 cool thanks man.
Huge fan from india 🙏🤟🏻
Thanks
Acha
Most useful video to this day ive been robbing all the ks!
Ok
Wow so easy to remove an engine👍👍👍
This one wasn't too bad. The V6 hybrid I just took apart had so much rust...
That kobalt gun tho
i have driven k24 once, not mine though but hell of a tuned car civic 2000.
Nice! You make it seem easy
The 4 cylinder was easier than the V6 I removed yesterday
This guy is the GOAT
Back when you could get front double wishbone suspension on an Accord.
Typical Japanese car; body rusts out before the mechanical bits wear out.
Thanks for making this video. Love the brush.😀
Very well done video
Thanks
The starter hick up noise sounds just like a old mitsubishi 2.4L engine
Yeah this was a slowpoke
How are you supposed to get the refrigerant out of the AC
You can leave the AC compressor on the car. Otherwise take it to a shop to get discharged.
You the best
Made it look easy. Gracias
Why would you separate the inboard joint like that on the driveshaft if you didn’t have too? There’s no pins or clips like a suby, you coulda just used a pry bar on the assembly and popped it out.
It was stuck!
@@speedkar99 sorry I shoulda been more polite in my phrasing. Just for reference I don’t usually comment but I’ve been stuck at home sick and bored to heck.
For future reference you can knock out the axle with a long bar and hammer, I use a 24inch (sorry standard not metric cause us is backward) and a 36 oz hammer. Takes about 3 blows and pops right out.
Again i apologize if I was disrespectful, I’m so bored and tired here at home.
Hell yea dude love this channel
How come you don't capture the AC system refrigerant before taking the system apart? Is it not illegal to leak that stuff into the environment?
How do you remove the axles like that? Always see them at the junk yard like this, always wondered how to do it?
what's the plan for the otherwise healthy powertrain?
I see you used a Gorin 2T hoist and coordinating engine leveler. The leveller comes with chains but you switched to straps. What size and length of straps did you use?
Where do you get all these cars to take apart? And what do you do with them later?
Appreciate it
Nice 👉👊! Thanks 👍
How long did that take you?
Good morning
Morning
awesome!
Next we should see the engine replacement right?
That's a lot of rust.
Wait until you see my next Honda
Very common in most cars up here in Canada (Central and to the East Coast), where we salt the roads in the winter or have salty ocean water up in the air. Rust proofing is a must on all cars if you want to keep them for a long time.
Not as bad as the rust on my New York car, so does this mean I get to buy a new one now?
@@chrisfreemesser5707 He did say 200km which is 124,000 miles. Very low in my opinion.
EPA has left the chat
👍. Next up, J series swap!
Wat falling apart????
Ok, but how long to install into a 99 crv? 10 minutes?
Any new vehicle review comes next?
Man, u make great videos. Why using this toothbrush?
It's my teach brush
I have seen him use the toothbrush on his other videos. The tooth brush is his trade Mark. He should use market his channel using the toothbrush as a trade mark.
@@speedkar99 ok thx
I think that was the only video of yours I've ever seen we didn't use a piece of family members clothing to clean up a mess
Trust me ...alot of clothes were used to wipe up spilled coolant
The toothbrush throw was unsatisfying because it didn't clink against a bunch of engine parts before hitting the ground. I enjoyed everything before that, though~
It just went right through an empty engine bay
That's where my car went. When are you going to bring back my engine?
Can you go over a 2020 Elantra moter. You did a kia ,is it the same .
Exact same car and engine as the Forte he did before
Ah called it.
Great video. What was wrong with the rest of the car? From what I could see in the video it didn't look like rust had gone through the floor. I have the exact same car with the same mileage. Only difference is I got it undercoated every year to prevent corrosion. The engine still has another 100,000 km to go easily. It runs and shift like when I drove it off the dealer lot 15 years ago 😁
The car looks new tbh from outside.
Some body damage on the side, bumpers, exhaust leak, windows busted and more...it wasn't worth putting it back on the road
That things clean as fuck compared to my honda lol
Would you do a video how to remove fender on this particular car, can't find it anywhere
My 06 TSX now sounds like an old diesel car.
Title should be more specific. You cannot remove the engine and trans through the top of the engine bay from a civic si the same way as this accord. The title is misleading
Why did you remove the engine if it only had around 120k miles on it?
Swap it into something else?
Do a tare-down on a V8 engine
That's why you buy a Honda
Hey boss
Hi
Honda always want to make sure engine swaps are easy for the rice boys.
👍🏽
Sorry, but a speedkar99 video is just not the same if it is less than 5 minutes, and the toothbrush does not make a "clang" when tossed into the engine bay. Just sayin'
👍
What about the shifter cable that goes into the transmission how do you get that mf out
Doesn't it just unbolt and you leave the cables in the car?
@@speedkar99 thanks for responding so fast I'm working on it right now but I undid the 3 bolts holding the plate that came off fine but I'm assuming the actual rubber boot around the cable is still stuck somehow 😅
Ladies and gentlemen!! I will now remove this engine from the car in 5 minutes using only this beat up toothbrush!
Good title for this video
I am available on weekends if you need help:) Simplicity Japanese engineering👍🏼
New here
Did some one say KOBALT GANQ GANQ GANQ
tear apart a stick shift transmission to see how it works
Yep I took the transmission apart already. Coming soon
Leave my car alone! ;-)
That engine sucks tho. It's not a 3 Lobe vtec like the TSX or k20a2
Poor job removing the Freon from the system before you did this. thumbs down.
There wasn't much than a psssht lol
How to remove Honda from your engine.
Do you mean “from your brother’s Honda”? 😛😛😛
That's another way to say it
Never listen to amateur !
E.g.
just releasing the AC like he does is a felony in many western countries.
People like him are destroying the reputation of the industry.
Boo-hoo call Captain Planet. This isn’t 1980s Freon anymore, it’s R134a which is completely benign by comparison
Completely disappointed with k 24 series, noisy VTC And unacceptable oil consumption 💩