Antique Watchmaker Vise - Restoration
ฝัง
- เผยแพร่เมื่อ 17 พ.ค. 2024
- In this video i'm restoring a very rusty and stuck antique watchmaker vise.
Sometimes I spend a lot of time just scrolling through the antique section of eBay without seeing something not even close to be interesting. It was exactly this case a few weeks ago, but then all of a sudden this little watchmaker vise appeared. I knew right away that I want it. I really like the small size of it with all the details and the old school design, so I bought it for $20.
It had really a lot of rust and I was sceptical at the beginning if I could get rid of all the pitting and put a nice mirror polish on it, because it is very thin at two spots. It turned out to not be a problem and it worked very well. The jaws themself looked still very good after removing the rust, I've only pu a little bluing liquid on them and that was it. The bolt and the wing nut on the other hand was a big issue on this project. The thread had way too much play, the thread in the nut was not straight and it was a non standart thread size. That means I had no tools to cut this exact thread. So I need to make at least a new bolt and put a same size metric standart thread on it. With this new thread the nut doesn't fit anymore on the new bolt. If I want to repair the wing nut, I'd have to close the old thread with welding and cut in the same metric thread as on the bolt. I talked to a professional welder to close this thread, but he told me that the diameter of the hole was too small compared to it's lenght to be able to close it, or it could be that he melts the whole nut while trying to weld it. For that reason I decided to make a new one. Even though it is just a simple wing nut, this part was one of the most complicated parts I've done for this channel so far, but it turned out perfectly. I also had to replace the wooden handle because it had some cracks and the holes have become too big.
At the end it turned out very great in my opinion. With the polished steel, the polished brass and the stained wood it has a very classy look and I really like it.
I hope you like my work and the video.
Huge thank you to all of my Patreon and PayPal supporters and specially to:
Noelle Sophy
Armands Satrovskis
Afreeflyingsoul
Bryn Gilbertson
Adel AlSaffar
Alan Hanson
Amanda Taylor, Esq
Andreswara Hermawan
Andrew Phillips
audi4444player
Courtney Maleport
Dan Williams
Gregory
Hunter R.
Jonas Richartz
LVE
Mellissa Marcus
Nick Cannon
Paul Ambry
Paul Mampilly
Shawn Daniels
Trevor Kam
TRG Restoration
Vince Valenti
Zachary Grimes
Timestamps:
00:00 preview
00:42 disassembling
01:52 showing all the parts
02:07 cleaning the parts with the parts washer
02:32 removing the rust
03:05 removing the bolt
03:29 restoring the main part
04:55 bluing the jaws of the main part
05:16 polish the inside with selfmade tool
05:41 explaining the issue with nut and bolt
06:16 making a new bolt on the lathe and milling machine
07:45 making a new wing nut on the lathe and milling machine
10:58 restoring the small washer
11:22 making a new wooden handle
12:37 stain the wooden handle
12:47 apply linseed oil on the wooden handle
13:02 restore the brass ring
13:30 restore the eye screw
14:05 showing all the parts before reassembling
14:19 reassembling
15:16 showing the finished restoration
16:08 final test
Time and costs of this restoration:
I was working on this project for 1 week
$20 watchmaker vise
$2 ash wood for the handle
My camera:
Panasonic HC-V180
If you have any questions about the process, machines i'm using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, it's not my language. I try my best to improve my technical english.
Subscribe for more of my content. I'm uploading videos about mechanical stuff, as new creations and buildings and also restorations.
Thank you for watching :-)
my mechanics T-Shirts:
teespring.com/stores/my-mecha...
My Second Channel:
/ @mymechanicsinsights
My Patreon Page:
/ mymechanics
mm : bolt has too much play
me : just say it
mm : the nut is slanting
me : just say it!
mm : size is not standart
me : just say it!!!!!
mm : unfortunately i have no tools for that size
me : just say it please!!!
mm : i make a new one (with a standar bla bla )
me : YES! YES! YES! Thank You! Thank You!
omg my first pinned comment is from mm
Same! I actually started clapping 😶🤣
Exactly! Cheers
When I first saw the tool I thought, there’s nothing to make. Ha! I couldn’t wait for him to say it.
My first thought too
That "I make a new one" makes me smile everytime
- DnCiak I love this part too
Makes me giggle like a schoolgirl lol
Me too lol
The ability this man has to recreate/duplicate those parts it’s amazing
Yep, I wait for it each time, myself!
Even before watching his videos I’m asking myself, what will he have to make for this project?
I feel this comment thread has confirmed that we all want a “I Make New One” T-shirts.
Absolutely!
sure
I'd buy one!
Agreed
Car has a scratch, I MAKE A NEW ONE
It is actually a jeweler's hand vise. The purpose of the hole in the tension bolt is to allow wire to be passed through it. If you notice during the cleaning process, the base, inside curve has a hole that extends all the way through the long bolt that goes into the handle. The hole that had the hanging screw on the other end of the handle was there for that purpose, not to hang the tool.
I was thinking the hole must have a purpose. I hope he reads your comment and drills the hole.
The real LPT is in the comments. I knew the hole had to have some purpose, and that /someone/ would point it out.
THIS
respect! he is a real professional))) - he just ignored your comment)
@SP Various gauges of precious metal wire are used during the making of jewelry.
I love the fact that he took the time to polish a single original washer, instead of replacing it for the cost of probably one cent.
Making that wing nut is one of the most impressive things I've ever seen
James W right when I saw he was going to make a new one I was like I need to see this haha my hat off to this dude he is Talented
I agree. Very creative.
Unbelievable right??
Insane.
@Yale Baker I don't think he custom made it, these cutting tips are made of carbide you can't make them easily they're meant to cut you need diamond tipped cutters and they are very very expensive.
i know "i make a new one" is everyone's favourite thing, but i for one really respect that he always tries to use as much of the original as possible and only makes new parts if he really has to and there is no other way
For MM, this is a hobby. I've found that for them, something like this is a labor of love. I also highly respect his desire to re-use as much of the original as possible; but I was eagerly anticipating those five magic words: "I make a new one."
Well yeah, that’s kind of the point of restoration.
@@Silver_Turtle very well written. I agree
agreed, he could've bought a new screw eye but he restored the original
mMeFlora agreed
I just want you to know the amount of off-camera work you do is so appreciated because I know this takes a lot and takes up most of your time but it’s really helped me relax. Especially going under chemo treatments this legit takes my mind off of what I’m going through thank you for taking the time and effort into doing what you do. I love it! keep it up!!
i hope you recover❤️
Bon courage!
I hope it goes the best for you.
Healthy and happiness too you. Best wishes!
I hope that 2 years later you are ok! 😉😉😉
I’ve always known your process is so much more work than traditional manufacturing, but it hit harder watching you make one wing nut.
I love how the process of 'making a new one' for the viewer involves: 1. bewilderment, how the heck is he going to do that?? 2. amazement at the steps, which all by them self seem so logical and straightforward once underway. 3. marvel at the endresult. 4. the realisation you just saw magic before your eyes, all shown in simple easy to follow steps.
simply amazing.
By far the best restoration channel. Just wish he uploaded more often. 🤔
It takes so much time to do everything perfectly.
Bruce Wayne
Yeah that's a fair point. Imagine if he restored a car we'd be waiting years.
@@danielknight84 I make a new one
In the great words of Toy Story 2.... YOU CANT RUSH ART
I'd rather wait longer for the high quality work.
I was raised in the wholesale watchmakers and jewelers supply business and the technical term we used for this tool was a "pin vice". They come in mighty handy for polishing pins. Some of these tools have a matching grove in the jaws that line up with the hole in the cross pin.
Thanks for the info!
It sparks joy when he says "I make a new one" 🥰🤩
My Mechanics: "Thank you for watching."
Me: No, "THANK YOU for restoring!"
I love his work, never cuts corners, very meticulous. Love watching.
Thank you very much :-)
He does cut corners! Didn't you see the part with the end mill?
@@mymechanics please never cut corners, its never worth it.
@@brucewayne4585 Was gonna say.
He cuts so many corners.
@@Oldy87 How else is he expected to make things round. LOL
I’m incredibly impressed by the wingnut manufacturing you did, that was amazing
Man, if I had all the tools this guy had I’d still be terrible!
this is why engineers have a constrained budget, give them unlimited resources and they go and make wing nuts
I was wondering is this the suggested way to make those things? It seemed pretty wasteful, in terms of work and material.
The old style wing nuts are not what can be found at a general hardware store now a days . Current ones are smaller ,they work but don't have the mass .
Thokari the mass produced wind nuts are drop forged, drilled and tapped. Not machined. no mass produced parts like these are machined as my mechanic would do it. It takes way too long and wastes a ton of materials.
@@balthazarnaylor5874 Thanks! Indeed the wastefulness of the process shown in this video had me wondering about this.
Material is not wasted@@balthazarnaylor5874, soap like this, surely if it is sorted, is like money, it goes by the kilo and it will be sold. If I buy a tube of stainless steel the store will weigh it for the price. Way bigger costs, I'm just making an estimated guess now, is the price of the machines and men hours...
G'day MM, I enjoy your restorations and the level of finish you bring things to :) I thought you would like to know that the hole in the bolt does have a function. It lines up with the hole in the bottom of the clamp, where it screws into the handle, and normally the hole would go all the way down through the length of handle so that you can feed long pieces of wire into it, just having the end you want to work on sticking out past the jaws.
This was for filing tapered pins to hold old style clocks and watches together, and it meant that you didn't have to cut the wire into short lengths, file them, and then cut it to the right size and waste wire, you could just feed a long piece of wire up through the handle, file the pin, cut it off, feed the wire through a bit more, make the next pin etc.
The hole in the vice bolt is also handy with shaping shorter things, like a long screw, as having the end of the piece in the hole in the vice bolt means that as you file or grind the item it can't wiggle side to side, and means the jaws don't have to be tightened up so much.
Hope you found this interesting, and keep up the good work.
Cheers
Duncan
i was going to tell him the same thing about what the hole in the bolt was used for, but i didn't want him to start crying . . . . just say'n.
I figured it had a purpose for the repair process but I didn't know what that might be. Thanks for educating me!
This should be the pinned comment
Exactly... Even someone like me knows that every feature present in a tool has an use... Specially in old tool. Even more so in watchmaker's tool
I came to say this, but you've said it perfectly. I suspect the eyebolt at the bottom of the handle may NOT be original, and that the handle may have been through-bored for long pieces.
I have a similar vice, but solid metal (all one piece). The handle is bored right through
It saddens me that I will never be this talented.
I swear I get a hit of serotonin every time I see, “I make a new one”
You know what they say: When you've got a lathe, every problem looks like a cylinder, lol.
What do they say when they have a milling machine?
can do without machine tools
@@valentinkassimov7555 Nothing, there are no problems at that point.
"this is as close as I can get on the milling machine"
*finishes polishing a superior copy*
He meant that's as close as he could get on the lathe, then he continued with handheld files to improve it.
When I watch these videos at night, I fall asleep instantly🙂
More people should watch this cause it's actually pretty cool to watch a person take something that looks unrepairable and makes it into something good again like dang it's kinda inspirational to
I'm new here and I love "I make a new one" but would love to know if anyone else gets absolutely GIDDY when he polishes something? Every time, I think to myself "no way am I gonna be surprised with how extremely shiny it's gonna get this time" and each time, the shininess explodes my brain. I'm a simple crow. I see shiny, I lose my mind.
I think that would make you a magpie
totally can relate. i feel like a very human shaped niffler sometimes
I see him touch anything metal and i just scream OKAY BUT POLISH IT
I used to watch restoration videos and every time I see blueing or blacking with oil or painting I cringe and I'm like "but whyyy you ruined it Polish it!!!" 😬
Yes totally! So satisfying to watch the amazing skills
These are like a bed time story.
Once upon a time there was this great thing, but over the years it was neglected and eventually set-aside. Then, our hero finds it, fixes it, and all is right with the Kingdom again.
Every time I watch the rusted, dilapidated and damaged tools get new lease of life with the toil of your hands, I say Thanks to God! I appreciate your meticulous and committed work! God bless you!
Very good to give new life to old tools which are often better than the new ones!
The hole in the bolt does have a function! You nearly found it at the end of the video, when you put a long thin part in the vice (like the bolt you ground) it stops it twisting in the jaws!
Great video!
This needs to be higher. Makes complete sense now.
@@green4green Glad it helped, do replies make it higher?
@@grannyflatgarage7599 not sure ... Hopefully?
Funny how your comment hasn't gotten a "heart", yeah? Of course, the hole had a purpose. Otherwise, why would it be there in the original? He did zero research for this tool. Fact is, he now knows this and is embarrassed to give you a hearted comment.
@@Rickbearcat LOL you're upset that he didn't get a heart on his comment? Are you serious?
Watching you remake that wing nut was amazing.
The best part if the videos is watching him manufacture nuts, bolts, washers and screws. Even when you watch it, you can't believe it!
That wing nut truly left me speechless. Great job
Thanks a bunch!
Imagine how My Mechanic restores a vintage car. The Best Series for HBO or Netflix.
It'd by a 10 year long series.
This car doesn't run. I make a new one
S McCartney lol
i already saw someone like mymechanics do it once. He then called it " Delorean " ...
"The flux capacitor is broken"
"Honey, my car won't start !"
"I make a new one"
Lol
Its going to be a meme now lol
😂
Honey, where are you going? I'm talking with you! I'm not done yet!
I make a new wife
😄👍
Incredible!
Rust to piece of art!
First time I see a handmade wing nut!
Made of iron!
It will last forever!
👏👏👏🏆🏆🏆 fro Brazil 🇧🇷
The way you "make a new one" of those wing nuts was a sight to watch!
Everyone talking about how exciting "I make a new one" is and I'm over here getting pumped every time he countersinks a hole
Countersink is the best invention ever...
@@adambingham1986 eh I can think of a few better than a countersink lmao
@@bastiatboi4510 to true
bmfg, wait until you see a back countersink tool! 😜
@@caedes5728 is that the name of that crazy poke through tool he uses in the coffee grinder video?!?
Terminator: "I ll be back"
my mechanics: "I make a new one"
Hahahahaha...
The hole you excluded from the original allows longer parts to pass through the main bolt. You do absolutely beautiful work I am jealous of your talent! It’s a wonderful thing to bring an old tool back to life!
You have no idea how satisfying it is to hear you say "I make a new one"
Well done on that wing nut! Congrats on 1mil as well!
It is just a nut, but this was for sure one of the most complicated parts i've made for this channel. Thank you very much :-)
You could gave easily bought one
but where is the fun in that
In Polish, this screw is called Butterfly.
@@szpynda Same in Spanish "tuerca mariposa" = wing nut
I am waiting for him to get a smelt and start processing raw ore, then casting the steel bars. Love the channel!!!
Your Milling Skills alone are sublime.
DEFINITELY! Without words! You are the best in TH-cam talking about restorations! CONGRATS BROTHER from Mexico City!:).😎
I love this channel. No unnecessary music, no excessive explanations, just to the point and in exceptional detail. Every video, I wonder how he is going to fix certain parts and everytime he blows me away.
"He can't possibly fashion his own wing....well, hello, mickey mouse!"
И по правде микки маус
Всё видео об этом думал)
Prander5x5 my thoughts exactly when I saw the wing nut at first 😂
Exactly! I thought he would be insane to make his own goddamn wing nut but alas, I have to eat my words
😳
This video showed up several times on my start page, but I hesitated to watch it, figuring it would be boring. Instead, I witnessed one of the finest bits of precision milling and restoration work I've ever seen! Bravo young man, and thank you for your incredible work! Rev. D.
It is unbelievable... this guy is much more than mechanics. He turns tools into master pieces.
“This is as close as I can get” ...
I'm speechless, I have no speech. (George Costanza)
@@zoltanurmosi1143 haha all in the edit
It's far from exact, if you ask me...
But, after sanding... looks good.
This is out of context. He finishes the statement "...with the milling machine"
That's the most beautiful wing-nut I've ever seen in my life
It wasn't until this that I remembered my paternal grandfather was a watch repairman, and somewhere we have an amazing little cigar box of tons of fascinating assorted wrist and pocket watch pieces! Some even still tick a little if you shake them... lol
The wing nut replacement was perfect 👌
My Mechanic: "I can't use the wing nut. So I'll make another."
- proceeds to make a wing nut out of stock steel -
Show off.
Let the man flex bruh haha
Not just any wing nut either, it’s like he went back in time and brought an identical one back with him. It’s bonkers.
I would have thought..wing nut....pick one up at Home Depot. This man makes an identical nut out of cold steel. He is truly an artist on the metal lathe.
Me: "My son just scratched his knees" My mechanics: "I make a new one"
Son: *confused happy screaming*
Or polish until it shines
I'm just wondering to what "I make a new one" refers to...🤔
That really is one of the selling points for me personally. Attention to detail and doing all of the work necessary really does make a difference.
He'll make you a new son with your wife. 😉
everytime this guy "makes a new one" I get excited cuz its better than the original
This man's skill and attention to detail is out of this world
Me, curled up in corner, hugging knees and rocking back and forth:
*He... He made a wingnut out of a doorknob... Of course... It's all so obvious now...*
LOL. I thought he was going to make a knurled knob, but no he being MM had to make a wingnut.
Hahaha this is so accurate
If you think that's impressive, you should watch the video where he made a combination lock from a bolt.
@@Anonymous-vh6kp Yes I have seen it as I am a subscriber to this channel, the running thing here is the "I will make a new one" when a part is beyond recovery or is missing. He made a standard tread bolt, and he could have bought a new wingnut. No he made a new one
A solid billet wingnut no less.
This guy is the embodiment of the word “precision”
Well, he is Swiss, I believe. It's in their blood.
Sometimes I don’t believe he does as best as he could to restoring things. For instance the hole in the bolt. There was a reason it is there. We may not know why but there is a reason.
Also, I hate how he polishes everything. Machined metal is how this stuff came. Leave it that way. Just my opinion.
@@Sak-zo1ui I like it. Whether it came that way or not is irrelevant. The point is that he shows care in his restoration efforts. Anyone can just leave it. He doesn't. Like it or not, his attention to that sort of detail has garnered him a sizable following, and that's a good thing.
Yakov Gaudofshmansky i understand. My point is he was not very precise/accurate in his restorations. Yes he is more precise than accurate but still you get my point.
Fabrication of that wing nut- 😮 🔥 !! Most impressive as per usual. 🤘🏻
your work is absolutely fabulous! I look at all the craftsmen who do like you (well they try) But even when you change your name, I recognize your work! You are the best, thank you, it's a pleasure. I would love to see some news. Thank you
If My Mechanics will start selling t-shirts with "I make a new one" print on it, I'll be first in line!
But it better work this time
But are not allowed to wash it, you have to make a new one every time, friend :)
Is this a tool to restore the sandblaster button?
That is part of folklore, it can't be replaced.
Sandblaster button is the true final boss. So far, it has only been mocking us with its presence. We're not strong enough to take on this challenge yet, but we're making great strides by fighting all of his unrefined evil minions.
@@_Killkor A truly great metaphore.
Sadly not. But he could make a new one.
Nothing wrong with that button. Perfectly functional.
È di una esagerata bellezza guardare la passione che mette nel trattare gli oggetti,ridona la vita ad oggetti fantastici...
My brain overloads when i watch any of your repairs...
... I'll make a new one
"unfortunately it's not a standard thread size"
you KNOW that's not unfortunate
MM " unfortunately it's not standard thread size "
You, me and most people watching this channel going YES YES YES he make a new one.
@@Super4017 There is EU metric,Chinese metric and Americano. Is there a Witworth thread?British standard?
That’s the most beautiful wing-Nut ever made.
Your restorations are next level, like to watch how you turn old rusty tools into a modern art 👌👍
Glad you like them!
I just wanna say, these videos teach without talking and are so damn calming.
Totally totally agree - I really appreciate the lack of voice over - as is the case on so many You Tube channels - where the channel moderator thinks he has to explain a process over, and over, and over . . . blah, blah, blah. My Mechanics - way cool!
It only has 7 parts, I thought the restoration is going to be a fly to the pictcher, so wrong. The wing nut deserves its own video. I was mesmerized by the process.
That little tool to polish on the inside is the bomb. I would have never thought aboout it.
Man, you never cease to amaze me. I learned new things today! 😊😊 Congratulations on the million subs!
7 pieces, 3 “I make new one”. I’m waiting for the day you just make a replica. 😆
I’m surprised you didn’t touch up the texture in the vice jaws.
👍👍👍
I'm sure he was thinking about it...
I thought the same thing. Woulda been easy too.
I wondered about that as well.
Ok that bolt removal method was genius! 🙌🙌
Your talents amaze me! Thank you for sharing all what you do!
“This is the close I can get on the milling machine”. Sends a probe to Mars...
Corrected the quote.
The dimensions of his new wing nut were off by 0.0003 mm. Totally ruined the restoration.
Kevin K he has to delete his channel now, he has brought shame to his family
Small, simple yet precious one. ✨✨ ✨
Congrats on your 1Million subscribers, glad to be part of it! 😊
Agreed mate :D
Thank you very much :-)
Oh wow, he crossed the threshold when I wasn't looking.
Veri Nais!
@@mymechanics We need an epic restoration for the 1 million sub celebration.
.where you completely "make a new one".
If I could describe this channel in 2 words, It would be "restoration 100"
Engineers, mechanics, scientists, carpenters, jewel crafters, technicians, blacksmiths, and historians, this channel is highly recommended for you.
Can’t even imagine, how long it take, to handcraft eared nut with files. This is masterpiece!
Watching him make the wingnut on the milling machine was breath-taking!
No he couldn't. The seller would claim that the returned device wasn't what he had sold, it had been altered and had different parts... :-p
That is the prettiest wing nut I’ve ever seen. Beautiful job recreating it.
Glad you like it :-)
You know, I've watched quite a few of your videos and I believe this is my first time commenting. Firstly, i just wanted to say thank you for sharing your wonderful talents with us. Secondly (and most importantly to me) i really enjoy the idea of turning things people have thought useless and dead into lively useful objects again. With a little love, persistence and ingenuity you show us that just because something is broken, doesn't mean it's garbage. I'd like to think this applies to people as well. That's my take away anyways. Thanks again.
"My Mechanics has upl..."
*CLICK*
Imakeanewone senses are tingling
I am so impressed and in awe by your craftsmanship and skill to reproduce parts that cannot be salvaged
Love this channel, but once I started watching on 2x speed, love it even more
Old tool part : *is broken and isn't made anymore*
my mechanics : "I'm gonna do what's called a pro gamer move"
Someday I want to see a joke restoration where someone goes "I make a new one" on every single part, ending with effectively a replica, rather than a restored piece. :P
And instead of the replay for the side-by-side comparisons he just shows them next to each other.
Today's restore was simple enough, I was hoping this was it. But he did manage to "make new ones" for more than half the pieces.
I always get a kick when I read that part of the video. I think to myself at what perfect of the restoration make it a restoration or a replica lol. But I still enjoy watching him out so much time and effort into it.
Lol I would have just bought a screw from a hardware store
@@armourandre7 - yes, me too, but he's apparently got too much craftmanship for such shortcuts!
April 1 next year, perhaps?
You find the coolest antique tools.
I am considering taking a vow of silence for a year and go apprentice with this guy!!!
"This is as close as I can get on the milling machine." It doesn't look good. He grabs a file and it ends up looking exactly like the original, but better. Amazing!
7:50
the function of the hole is to allow you to hold a long part with the middle of the vice by feeding it through the hole. so the bolt doesnt get in the way
Robin Steel I came here to say this, But knew in my heart it had already been said.
Also came to say this. It has a function. Everything in older tools has a reason.
WOW! 16+ minutes of utter entertainment ... thank you!
I am 100% addicted to these videos- what a master! You do this in a way that we all wish we could. The only suggestions I would have to offer are around some of the woodworking choices you make. Try plasticizing with wood restoring fluid or filling wooden pieces with epoxy/fine sawdust and re-machining. If you need to replace the wood, perhaps try to find antique wood or old-growth wood so that the grain pattern is closer to an antique. And finally, the choice of stain you usually use is a matter of preference of course but it seems to have too much black in it, which drowns out the grain, and try tung oil for final coat! Anyway-keep going- You are awesome!
2020 Me: "Our world does not work properly anymore..."
my mechanics: "I make a new one"
I thought, No way he’s making a wing nut, right? But then there it was, and I’m not worthy. Amazing videos, once I start watching, I can’t stop watching, addictive. Thank you for sharing your expertise, just amazing.
I love it when he says 'I make new one' awesome videos👍
Thank you for your channel. I think my humble restorations have improved by watching your fine skills!
I love how you take what most would see as scrap and return it to life.
THREE "I make a new one" in one video
And one of them was the wing nut!
DAMN
The man with golden hands.
I see a T shirt for sale soon.. The logo with captions under .." I make a new one...."
I'm pretty sure I would buy that one. :)
I'll buy one
There you go! The people have spoken...You should really make one in euro colors as well. Love grey and orange.
I’m in!
I'd love one of those.
This is definitely cheaper than go to therapy.