DIY Motorcycle Maintenance: Engine Oil Change Step-by-Step

แชร์
ฝัง
  • เผยแพร่เมื่อ 15 ม.ค. 2025

ความคิดเห็น • 7

  • @10GearVlogs
    @10GearVlogs  3 หลายเดือนก่อน +3

    Step by step process: diy if you are alone and on a ride and reached the km for oil change. Best is to visit your nearest service center and get it done.
    1. Keep the plastic cap open so air flow pushes the oil out of the drain plug.
    2. Unscrew the belly pan screws (4 Numbers).
    3. Unscrew the oil drain nut and remove completely.
    4. Remove the oil plug inside and old oil flows freely.
    5. On the other side you have oil filter. Remove the 3 screws and change oil filter after placing the oil filter in new oil, so it soaks some oil already and can work well
    4. Screw properly the drain screw and the oil filter area.
    5. Pour new oil through the inlet area upto the level as mentioned in the owner manual. See the level in the level checking window.
    6. Double check if all the screesbare tightened well.
    7. Start the engine and see if all is smooth.
    8. Go on a short ride and check if things are ok. No leak etc.
    That's it. You have successfully changed oil.

  • @RWSGerman
    @RWSGerman 3 หลายเดือนก่อน +3

    Very good bro. Nice. 😊

  • @KrishnaRama-g6y
    @KrishnaRama-g6y 3 หลายเดือนก่อน +2

    Very very needed.

  • @BN-ot5rd
    @BN-ot5rd 3 หลายเดือนก่อน +3

    Great piece of info. Do it again while next change. Would be helpful wth two videos.

  • @rd1448
    @rd1448 3 หลายเดือนก่อน +4

    Very useful diy. Must know the process. Thanks 😊

    • @10GearVlogs
      @10GearVlogs  3 หลายเดือนก่อน

      Most welcome 😊

  • @JasminD-nj7tr
    @JasminD-nj7tr 3 หลายเดือนก่อน +4

    Very good. But I do not do such thnigs :D