@@marcelhustleassel8776 I’ve been using carb cleaner to pour into the cylinder head. It’s pretty good in stages at breaking down the carbon build up too. Beyond that... if it’s a complete rebuild, stripping the head and popping all the carbon built up bits in an ultrasonic cleaner worked beautifully for me. Took a while but no carbon remained!
Hello can you tell me from which side should I install small camshaft bearing ? As I understand it have meaning, it is not same from both sides, its greased and have sealing from one side, on my motor it was totally destroyed, I took it out by peaces. Maybe it was installed by wrong side that's why it broke and broke every thing in head 🤔
Hey, what about the roller arm bearing, when it is worn out should it do some ticking sounds or something when engine is running? I have a 09 450exc and have a ticking/slightly knocking sound at idle. Any recommends what should I check?
maybe check the valve tolerances if you havent already, also ktm uses hydraulic cam chain tentioners so after starting the bike the oil pressure needs to build in the tentioner, until then its possible that the chain makes a knocking, ticking sound. after a few minutes it should go away
Note to any 690 owners if you are in the top end the rocker arms are a major point of failure in the earlier models. If you’re in there change them with newer model ones. Could save you a lot of money.
My 2012 just blew at 14,000. Was well maintained all along. I don't have the time or space to rebuild it myself. Know any good rebuilders in California?
Great series of videos, thank you from a 701 owner
Hello can you tell me how many KM has this engine before rebuilt please?.
Why am I watching this, I don't even have a bike.
Nice work guys 👍
Same.
I actually have a horse 🐎 but it's intresting to see 👀😅
Потому, что ты хочешь купить его
Justo lo que necesitava, gracias bro👌
i have a svartpilen 701 2019 does my camshaft look like this or its the gen 2?
Great video series.... What is the solvent you are pouring into the cylinder head and which carbon cleaner are you using? Thanks
Came to the comment section for exact same questions. No answer?
@@marcelhustleassel8776 I’ve been using carb cleaner to pour into the cylinder head. It’s pretty good in stages at breaking down the carbon build up too. Beyond that... if it’s a complete rebuild, stripping the head and popping all the carbon built up bits in an ultrasonic cleaner worked beautifully for me. Took a while but no carbon remained!
Any chance we could get a shopping list of parts and tools for this!?
what year is this? wow I have a 2018 and man is the cam different
Hello can you tell me from which side should I install small camshaft bearing ? As I understand it have meaning, it is not same from both sides, its greased and have sealing from one side, on my motor it was totally destroyed, I took it out by peaces.
Maybe it was installed by wrong side that's why it broke and broke every thing in head 🤔
@1:26 what size hex is that plug?
Good morning friend, can you tell me the diameter of the piston pin please
What's the valve guide size limit?
@27:06
@@chrisherndon7045 The valve guides new should be 6.004-6.016mm. Wear limit is 6.050mm.
Hey, what about the roller arm bearing, when it is worn out should it do some ticking sounds or something when engine is running? I have a 09 450exc and have a ticking/slightly knocking sound at idle. Any recommends what should I check?
maybe check the valve tolerances if you havent already, also ktm uses hydraulic cam chain tentioners so after starting the bike the oil pressure needs to build in the tentioner, until then its possible that the chain makes a knocking, ticking sound. after a few minutes it should go away
Brother can you help me for ktm duke 690 piston ring 101.95 mm
Note to any 690 owners if you are in the top end the rocker arms are a major point of failure in the earlier models. If you’re in there change them with newer model ones. Could save you a lot of money.
My 2012 just blew at 14,000. Was well maintained all along. I don't have the time or space to rebuild it myself. Know any good rebuilders in California?
👍👍👍👍