To save all that work they could have just machined the hole in the 2 original parts, fixed up the metal insert, press and the weld the two bits together. Same result, less time, just not so dramatic.
Did not even try to set the broken piece to run true in the lathe and then it got worse as the FAUX "Repair" continued. When reset in the lathe @17.40 there is a good 60 though run out that was not corrected.
Interesting change from some videos. Rather than boring out both halves and creating a threaded insert to join the two halves together with weld, manufacturing a new end piece - I wonder why - perhaps the diameter of the piece at the break point ???
Curtis gunna love this one .
This "repair" will be sufficient for a child's sand box .
👏👏👏❤️👍Hi professional job you guy’s made so easy 💯💯
Your still up to that nonsense of "breaking" parts to "fix" them again!😢
Keep it real - BTW I still gave a thumbs up to help! 👍
I give a thumbs down to mark having sat through this pantomime .
That was pretty ingenious to use a mag drill for the end mill work... 😊😊
Super jest i przepiękne jest to odrestaurowane pozdrawiam serdecznie. 👍👍👍👍
nothing breaks that clean, that thing was "fix" ed before lol
@ttinnovations3310 Si è rotto perchè da quelle parti caricare 10 volte la portata massima è ritenuto normale...
Good job man
Mejor que nuevo , exelente mis amigos.
To save all that work they could have just machined the hole in the 2 original parts, fixed up the metal insert, press and the weld the two bits together. Same result, less time, just not so dramatic.
Needed somewhere to leave the high strength welding slag .
This "repair" will be sufficient for a child's sand box
As it's all cast iron (???) no cutting oil or lubricant needed for precision lathe working results... ):-)
Актеры у которых никогда не будет оскара
Legal 👍👏👏👏
Did not even try to set the broken piece to run true in the lathe and then it got worse as the FAUX "Repair" continued.
When reset in the lathe @17.40 there is a good 60 though run out that was not corrected.
عمل ممتاز،ماشالله
Interesting change from some videos. Rather than boring out both halves and creating a threaded insert to join the two halves together with weld, manufacturing a new end piece - I wonder why - perhaps the diameter of the piece at the break point ???
Oohh what a surprise!!!! 😅
Hi, Bro ! I learned a lot of skills from you
No final do video , até a mosca foi comferir a precisão.
🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣 Se si può saldare si può riparare,niente di più sbagliato.
Sir ma ap sy milna chata hun
👏🏻👏🏻👏🏻👍🙏
Немее за първи път направил сие представка!
Големи железа!
Это не на долго
فلسطين حرّة
And so should these "repairs" be .
1:43 😏
Мне кажеться они ради контента уже всякую херню чинят😂
ขุดดูประเทศสงครามเพียบส่งโรงหลอมเหล็ก😮งานใหม่ต่อยาวๆผลิตไม่มีขาดในตลาด😮
Sir please mery msg ka jawab dena
Another fake video