Homemade firewood processor
ฝัง
- เผยแพร่เมื่อ 17 พ.ย. 2023
- Homemade processor with a mere 19 hp kubota d950 engine may surprise you. Running fresh cut hickory logs through the 6 way wedge in this video. The splitter cylinder is 4" bore and the prince auto cycle valve I just replaced and have not adjusted yet, so it's at the factory default 2000 psi. Clearly I need to take a few minutes and tweak it, as you can see the detents are too low and I could use a few hundred more psi occasionally.
It works great! I have noticed that in America they make big machines with a lot of hydraulics and in Finland they try to make machines as simple and light as possible🙂
Nice machine. Did a great job building it. Wish I had one.
Thank you!
Awesome job on making this processor! Looks like it works great!
Thank you! It works really well for us so far!
I can honestly say I'd rather buy yours than any Eastonmade processor. Very nice.
I'm a mega fan of Eastonmade, just too poor to buy one haha... I take that as a major compliment, thank you!
Thats very nice. Seems to work dang good.
Thanks! It does very well overall!
Very nice. The poor old Kubota is definitely putting in it's all.
It sure does lol. I think I'm going to turbo it...
@@BigBlue12VHave you thought of getting a VW diesel or even a VW Tdi? 4 cylinder 60 to 100hp.
@@HuckThis1971 alternative brand power sources have crossed my mind, however I believe reconfiguring the machine would be pretty difficult to accomodate a physically larger engine, cooling system, etc. Also, the hydraulic system size doesn't require any additional engine power currently, the only time it needs a slight boost is when cutting while retracting the splitter cylinder. Just a couple of extra ponies would put it in the sweet spot I believe, and a turbo addition should be much easier and more cost effective than trying to shoehorn a larger engine.
Machine is working awesome, you've been a long while tinkering with that thing. All of it well worth your investment, looks really smooth overall.
Thank you! Very happy with it overall. Next mod will be adding a turbo, it could use just a little bit more engine power at times. It has been a long journey to get to this point for sure. Lot of learning, trial and error. It needs cosmetic work, smooth up some edges and cleaned up and painted. Already dreaming of the next one, if I ever build another... will be running a 6 cylinder turbo diesel and a circle saw I think. I wanna go fast!
@@BigBlue12V You gonna use a 12 v cummins 5.9 ? That would pretty much cover your power needs I'd say. 48" saw blade would be an awesome project, that'd be stepping right up with the big boys.
@@Tonnsfabrication why stop there? Maybe a 466 or 8.3 lol
A cote of paint and it will look like a bought one!! Runs great!
@@TheTorkerman Thanks!!
Slick. I have plans on building a processor of a sort. I have built a fair few machines. Allen family firewood’s Ole Buster and our Orange crush are here on TH-cam. Buster is billed as the fastest vertical splitter on TH-cam.
Thanks! I'll have to check those out!
I think Buster is a bit slower than the Russian splitter in video linked below. It's probably safer and a bit more controllable.
th-cam.com/video/sc7msdntlI4/w-d-xo.html
Really now set up, I’ve got plans to build one myself but I haven’t quite figured out how to get the saw operational, would you mind doing a walk around so others can get ideas on how to build their own?
That’s awesome!
Very well done! Were you able to run all of the hydraulic functions off of 1 pump? If that's the case, are you using a power beyond port out of the Prince valve to run the saw, conveyor, log deck, etc?
Thank you! It is a two section pump. One section is 15 gpm dedicated to the splitter. The other section is 7 gpm and runs everything else. The saw is direct drive via a clutch and belt.
@@BigBlue12V Nice! You've managed to keep it fairly simple, but still has all the functionality you need.
Nice machine, it might help to have higher gpm's on your pump. The saw really pulls hard on the hydraulic system, but that is really an impressive machine!!!
Very nice setup. How about a roof for when the snow, rain and intense heat come? Just a thought.
It's been on my mind to add a roof!
NIce job. it seems like the hydraulics on the saw may need some tuning. Was the conveyor a diy or home crafted ?
Thank you. The only hydraulics on the saw is the cylinder that feeds the saw. The saw is direct drive from the engine via a clutch and belts. The conveyor is a hytrol brand industrial conveyor, with the electric motor and gearbox removed and a hydro motor driving it via chain and sprocket.
Wow be a good video if it worked