How to Replace a Fuel Filter on a MK6 GTI
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2024
- We show you how to replace the fuel filter on a MK6 GTI. While this video is specific to the MK6 GTI, this also applies to most 2.0t VW and Audi engines. Take a look at the list below of vehicles it applies to.
2.0t VW and Audi Fuel Filter
www.shopdap.co...
4 piece Pick Set for this Install
www.shopdap.co...
8 piece Magnetic Tip Screw Driver Set
www.shopdap.co...
Mounting Screw for Fuel Filter Bracket
www.shopdap.co...
Applications for this OEM VW/Audi Fuel Filter
Audi - A3 - 8P 2006-2008 - 2.0t FSI and TSI
Audi - A3 - 8P 2009-2013 - 2.0t TSI
Audi - TT - MK2 2007-2014- 2.0t TSI
Audi - TT - S 2009-2014 - 2.0t FSI
Audi - TT-RS - MK2 TTRS 2009-2014 - 2.5t
Volkswagen - EOS - VW Eos Parts - 2.0t FSI and TSI
Volkswagen - GTI - MK5 2006-2009 - 2.0t FSI and TSI
Volkswagen - GTI - MK6 2010-2014 - 2.0t TSI
Volkswagen - Jetta - MK5 2005.5-2010 - 2.0t FSI and TSI
Volkswagen - Jetta - MK6 (Facelift) - 1.4t, 1.8t, Gen 3 2.0t
Volkswagen - Jetta - MK6 2011-2014 - 1.4t, 1.8t, Gen 3 2.0t
Volkswagen - R Models - MK6 Golf R - 2.0t FSI
Volkswagen - Sportwagen - 2009 - 2.0t TSI
Volkswagen - Sportwagen - 2010-2014 - 2.0t TSI
----------------------------------------------------
Shop for VW and Audi Parts Here
shopdap.com
VW AUDI Specialty Repair Cornelius NC
www.daprepair....
VW AUDI Specialty Repair Kent Ohio
www.daprepair....
More info on DAP Reward Credit
shopdap.com/st...
- We appreciate your Support and Purchases! -
2.0t VW and Audi Fuel Filter
www.shopdap.com/make-model-year/volkswagen/vw-audi-2-0-t-fuel-filter-1k0201051k.html
Mounting Screw for Fuel Filter Bracket
www.shopdap.com/n-904-968-02.html
Thank you for the video to reference when I did the job. One thing I did different was I disconnected the 2 first then unscrewed the housing and dropped the filter down, then I unclipped the single one which was much easier to get at that way.
That’s a really good tip, thanks for sharing!
Good tip thanks for sharing 👍
I thought the same thing as soon as he said the clip is on the top side, thank you!
Wonderful tip!
YOU SAVED MY LIFE! My fuel line retaining clip on the black fuel line also got stuck just like yours did in this video. I didn’t realize it wasn’t locked in place and tried to start the car, when i cycled the key i heard a “pop” but didn’t think anything of it. Turns out the black line popped off and spewed high pressure gasoline EVERYWHERE. when i went to turn the engine on, the car sputtered infinitely and wouldn’t start. I panicked. this is my only car, not only that, i had only 2 hours left before i had to be at work and i’m also planning on taking a 6 hour drive to meet my girlfriend’s family TOMORROW! By chance, I decided to rewatch a filter replacement tutorial. I got SO LUCKY that i found this one by Pauly D. When he explained about popping the clip back into the armed position, i lost my mind with happiness. Earlier, to ensure i could get to work, I secured my loose fuel line onto the filter with ZIP TIES and was just hoping and praying that the thing would hold strong until i could replace what i thought was a broken retaining clip. Apparently it’s just stuck. Can’t wait to try that “pick trick” later when I get home from work. THANK YOU PAULY D!! Life-saver!
Thank you!!! Only took me 20min to change filter thanks to your video!
Thank you for doing these diy videos it’s a huge help !!!!! I’ve learned how to do a fuel pump and filter keep up the great work !!! Especially with 2 tsi engine’s 👍🏻👍🏻👍🏻🔥🔥🔥💯💯💯
Good tutorial, was the same filter and setup on my 2017 Jetta 1.8T, used MANN part WK69 (6.6 bar). Just had one stubborn hose on the intake side that had to be pressed in first in order to get the clip/tab to press in. Did it at 50k. The plastic bracket where the screw goes in also had a plastic tab that had to be broken from the factory in order to open the filter bracket mount.
SUGGESTION/IDEA: At new or after a replacement, cut a small section of tubing to surround the connection to act as a debris boot to ease future service efforts. Use zip ties(no rust potential) to GENTLY compress the tubing into place on each side of the connection so the tubing doesn't slide. You could also slice the length of tubing to wrap it around the connectors to save disassembly effort. Won't be as protective, but. .
Also, maybe a DROP of soapy water into the clip depression section to loosen debris during clip depression to ease removal. Clean the clips with a rag before re-install.
Use brake clean to clean the dirt the spray silicone lube they come of real easy
8:21 "aaand I would just give it another tug real quick; make sure everythings good before you get finished up here"
So my mk6 went into limp mode and it popped a code p2293 for the fuel filter/pressure regulator, if I replace that should it go back out of limp mode?
How often we have to change this filter??,
once a day.
Hey Paul great job as usual. Can you guys please make a video on how to fix the rear washer line break issue with the mk6 cars? Mine is broken and leaks into the trunk and interested in DIYing it soon.
Thanks for the help..appreciate
You can tell fuel is cheap in the US @4.20. If that was in England it would be OMG SAVE IT CATCH IT.
I have heard its bad to save fuel from filter because they could have some dirt and debris in them
Thanks for the video now I know how to release those pesky fuel line connectors!!!
Is this method the same for CHPA EA211 Golf mk 7 (2013)? Other models from the same year have the fuel filter in the front which can be changed by opening it from the top. But the service manual from ErWin doesn't show this.
Does this also Apply on 2019 models.... I'm trying to find but I can't. Appreciate ur help on this . 🙏 🙌
Is it still on the rear right side for right hand (UK) drive VWs?
I have a Skoda superb III 1.8 TSI. Could it be the same setup?
Good knowledge, thank you!
I found much easier to remove 2 connectors first, then the screw, then pull down the filter, and finally remove the third connector
...same same. That's basically how I did it.
my GTi mk6 has fuel leak problem near that position, I guess it's the fuel filter. thank you!
Do you have video on doing this fuel filter change on 2.5L SE Passat 2013? or is it pretty much the same?
Pretty much the same for all of these cars except the few models that may have it inside the gas tank.
I just did the filter on my 2016 jetta 1.8t & now it wont start. Im thinking i need to prime the system, does anyone know of an easy way other than probing the fuel pump?
Does the Golf 7 have a fuel filter that can be changed regularly?
MK6 Golf R Stage 2+ here
Replaced this with the MaNN filter i purchased, and ever since I've been getting code "Fuel Pressure Sensor Malfunction" P119A - already replaced both pressure sensor and low pressure sensor. Could it be i got the 6.4 bar filter and cause this engine light to come on?
Help!
So i have a 2010 VW Jetta 2.5 engine currently @ 125k miles. My maitenance schedule has never once reference me to change the fuel filter. Does that mean I do not need to change it at all unless given issues? Isnt that bad to leave the fuel filter in for that long? Please can anybody help???
Is it a problem if the "push pins" are partly broken? I mean my buddy tought it's a pull pin, so he pulled the fuck out all of em. After the filter replacement he secured the fuel lines with the remaining pin parts (I saw the process, it remained in palce). Is it possible to replace the push pins or the fuel line ends only, or do I have to help him install a brand new fuel line?
I couldn't see any clips and busted off the pipe coming out of the old filter. What a stupid way to connect a fuel line. I'm going to try again after looking at the video several times. Seems like all the connectors are fragile and hard to remove and if you screw up it takes major work to fix it. No way as simple as it looks.
Use your fingers to press instead of screwdriver, worked perfectly and quicker for me
My mk6 wont start last time it was on it sputtered and died then engine wouldn’t turn. could this resolve my problem ?
Adrian Ruiz Arriaga sounds like an electrical problem not fuel delivery
did you resolve this? my mk6 is doing the same thing. takes 3-4 tries before it actually starts after dying.
@@Avreyy what resolved it?
glibaudio crankshaft sensor between the transmission and the engine. Took about a month of dealing with it shutting off until it threw the code. Sensor was about $60. I did the camshaft sensor on top of the engine too which was also $60.
Where is the fuel filter located on a Mk7 GTI? I peeked under and nothing was visible.
Part of the fuel pump so not really replaceable unless you have a diesel
M yeah, its just odd they went that way with mk7 golf, my 2017 jetta with 1.8t gen 3 engine had the cartridge under fuel fill side of car. I’m assuming it is just a cost cutting measure?
Changed filter now vehicle won't start!!!??? Help
you need to look at.... battery, start, engine chain
Some problem, nobs here and there, still ok, Thanks, Johnny D Bergh
Does a MK7 GTI have a serviceable fuel filter?
Only the diesel ones
My Mk5 GTI doesn't always start smoothly.
Video: f.maxkoning.nl/IMG_2504.mp4
Could this be caused by a fuel filter that needs to be replaced?
Spark plugs & battery are already replaced.
HOW MANY DIYERS HAVE A LIFT, MAYBE 1% , JUST SAYING IT ISN'T THAT EASY
Broke all 3 FML 💀
There are a lot of DIY auto repair videos on TH-cam. Yours are the best.
4:58 the little hanger holding the black line is the tool to release the upside down clamp
Thanks
Just did this on my 17 Jetta 1.4t
No issues . I didn’t need any tools as well
I have VCDS so primed the system but you don’t really need VCDS for this.
Thanks
Just used my fingers to gently remove the connections
Push the lines toward the filter and then push down on the tabs and pull back on the lines away from the filter
Car has 40k miles
how did you prime the system i have obd11 I'm wondering if I can also do that to make less fuel leak out
Great video the perfect tool to release the upside down clamp is the cable bracket which can easily be unhooked from the chassis
Have you tried the Schwaben P-648 Fuel Line Pliers? I'm just wondering if they're worth it and would reduce the risk of breaking the fuel line. Cheers from Switzerland! :-)
This took me 2 hours . Paul did it in 8 min ! Good job and video .
Great video! The Filter is in the same position and has the same Part No on 1.4 tsi engines in europe.
Same for CHPA 5G1 EA211? How can I know the fuel filter is the problem in regards to high fuel consumption?
Just thought I would say this video helped me change my 2.0 TSI scirocco fuel filter in 10 minutes! Took longer to get the petrol cleaned off than to change the filter
Great video - I did however hear you say Em-Kay :)
VAG connectors, no matter where and what they are used for are the absolute worst engineered things I have seen. It’s as if they don’t care about people needing to change these things 7-8 years down the line while the car sees salt and snow for sometimes 3-4 months of the year... Everything from electrical connectors to clips to these...
I am wondering why VW CC 2.0 TSI does not have this filter. The power train is very similar to all MK6
Would a blocked filter cause a P0171 code?
I just did this but the car won't start now, I think there is air in the fuel lines. Any tips? Turing the car onto accessory mode won't prime the filter enough or get rid of the air in the fuel pump. edit I had the hoses switched like an idiot.
Why not just pull the filter b4 undoing the last hose?
Because it is way easier to push in the damn clips when the filter is mounted rather than it flopping around or holding in your hand. Keep it mounted until all the hoses are off.
Can somebody help?? I replaced the fuel filter on mine and primed the car and the car wont even crank when i turn the key. I dont know what i did wrong, i know youre suppose to prime the car before starting and i did that but i cant even get a crank. I turn the key as if im starting the car regularly and get no crank at all.
VW South Africa completely ignores the petrol filter and never changes it. I recently bought a 2nd hand A4 2004 model with 220 000 km's and the fuel filter that was in there was produced in 2003... Spoken to many ex-techs from there and they just say that VW doesn't bother with it D:
I’m covered in gas😭
Instead of what you did i had to push that clip more in and then it clicked. Just to be sure removed it and it clicked back in but it does move a little bit back and forth not seeing any leaks so far
Thank you for your help and your time it’s same to 2015 Jetta 1.8 turbo?
Hi!
The mk7.5 (restyling), tsi 110kw, have the fuel filter?
For the service the filter is integrated in the fuel pump... bah
for that third little clip on the fuel line from the front could you not just unscrew the plastic bracket to get at the clip from the side instead of on top?
This worked for me. The fuel line can rotate a little just enough to get a good grip from the side. Working on jack stands isn't really handy for this repair...
Thank you for this well done video.
2015 Passat limited edition 1.8l turbocharged . They’re telling me the filter is on the fuel pump?
check underneath the rear passenger side door. should be near the frame of the car. i have a mk6 also
how many kilometers do you recommend to change fuel filter?
4 years/60,000 kms
I didn't have a pick for the front line. I put sturdy wire around it instead and pulled from the bottom with one hand, and wiggled it out with the other. Worked pretty well
"passenger rear of the vehicle this is ganna be in front of the rear wheel right at the rear of the rocker"
WTH? lol where is at?
How do I depressurize the fuel system before starting to take mine off?
Open gas cap
No, remove pump fuse and stall the car. Opening your gas cap will give you more spillage
@@D3nn1s lmao no it doesnt you have no clue what your talking about
@@usa5046 go ahead and explain then. Stalling your engine will pull the pressure away from the pump so theres no fuel pressure at the filter. Opening your gas tank has no effect at all, that would be the best case. In the worst case you allow the gas to flow freely towards the fuel line that used to be connected to the filter. Not opening the gas cap may still leave a slightly negative pressure which will reduce the pressure the fuel has at the filter.
Hope you were able to follow me. Now go ahead and explain why im wrong and why your right. Looking forward to that, tho i dont expect a reply...
@@D3nn1s listen junior you have no clue what your talking about removing the gas cap alone relieves the pressure you do not have to stall the engine to do that junior
Do you need to bleed the system for the car to start or does it run like normal after changing it?
Thanks for this video, you potentially save me a lot of grieve by knowing how to unclip the lines!
Mk7 Gti/R and 8V a3/s3's don't have serviceable fuel filters right?
Hey Paul is this the same process and filter for the 2.0 NON turbo novel mk6 2011 Jetta?
Will this work on a gen 3 mk6 1.8t Jetta?
Thanks for this video?
This works also for MK7 GTI?
How much of a difference is it on the MK7?
We will talk about on AskDAP 119
Great video. It took me a lot to remove the upside down connector! Make sure you don’t kink the fuel lines ;)
Very useful info! Thanks! 👍💪
Thanks 👍
Will this be the same on a Scirocco 2.0 tsi? 7 months and still no reply. Make that 8 months.
Almost no one replies to comments. They want to let the viewers comment, get hits. And the Scirocco is the same car, just prettier.
Have an 2009 GTI heavy modded, TTE420, bigger Injektors, HPFP u think it's time to change my Fuel Filter? BTW I never have problems with Fuel or with the system
Hackl George You don’t want to wait until you have issues to replace the filter. It is a part of basic maintenance.
@@OriginalBrett610 lmao right
I’ve just changed the fuel filter on my mk 2 Audi TT and now it’s misfiring.
You installed it incorrectly?
고마워요 GTI 6 운전자 인대 떙큐 ~
Hey dude I have an Audi TT mk2 2L tfsi and for some reason it keeps leaking petrol... it's like exactly under the center of the engine bay so kinda at the 4 th piston from the left any idea on what that could be my car has been in and outa the shop several times now and when i prime the fuel pump it makes a weird blowing sound... just a general answer would be appreciated!
well if it is leaking by the engine bay it could b leaking from the fuel rail, or fuel injectors. That would be my first guess. but if it has been in and out of the shop, i dunno because I would assume any mechanic that knows what he is doing would catch that?
When this is done, in a new filter is air. Do I need something else more to do before I start the engine? Thanks
Here’s another argument why electric cars make so much sense...