NO. he put them in first then made the video so he could talk and brag up his car that nobody cares about but himself. He probably shows this video at his family reunions to everybody.
I used the same tool. First time. No instructions. I did get it centered, got it all in. Had a lot of trouble getting center pin out. Unscrewed it from block w/ hook arms. Got the hook arms out through the side of the spring. Used two pry bars to get the 19mm hEad of the center screw of the compressor to pop out the edge of the spring. (Twenty minutes trying to make that happen btw) Ended up I underneath using a spot point of iron and hammer to slowly hammer that center pin up and out the top side gap of the spring. I thought about those holes to at the top and bottom. My 03 WJ 4x2 4.0 6cyl doesn’t have those lower holes to come out through. That would have been awesome! Thanks!
Would have been nice to show the tool in the spring. you can put the fork in two different ways... Also you will have 4 neutral gears with that 700r4 soon after bolting it to a 454. not a good tranny to use with that engine unless youre driving like an old ass man. You need a 4L80
I AGREE 110%.. with you J 206 .ppl wanna see how YOU Used the tool!!..Step by step video....Not PRAISE THE TOOL!! ...what a useless -informative video! !!
Also you said it was hard to get the hook out when you was done? What is so hard about it. unscrew it all the way and open the hook up and it falls right out the bottom. I have a 64 Impala with the exact same A arms. There is all kinds of room to get it out
Damn here I am looking for coil spring compressor how to and I come across this video so I was like sweet. I have the same exact coil spring compressor and I kept fast-forwarding waiting for you to do something. All you did was talk you didn't even show how to do anyting. Thumbs down
What a waste of time you didn't show how to do anything yap yap yap its pointless to explain something and now show how its done total lack of common sense
8 minutes and 32 seconds of my life I'll never get back. Title should say "how to talk about coil springs".
Lame Video . 🤦♂️
I can't wait to see this guy's videos about how he's cured cancer, found the Holy Grail, and flown to Pluto - and back.
Nice you got the springs in after doing the video then named it how to; reallllllllll smart.
NO. he put them in first then made the video so he could talk and brag up his car that nobody cares about but himself. He probably shows this video at his family reunions to everybody.
I used the same tool. First time. No instructions. I did get it centered, got it all in. Had a lot of trouble getting center pin out. Unscrewed it from block w/ hook arms. Got the hook arms out through the side of the spring. Used two pry bars to get the 19mm hEad of the center screw of the compressor to pop out the edge of the spring. (Twenty minutes trying to make that happen btw)
Ended up I underneath using a spot point of iron and hammer to slowly hammer that center pin up and out the top side gap of the spring.
I thought about those holes to at the top and bottom. My 03 WJ 4x2 4.0 6cyl doesn’t have those lower holes to come out through. That would have been awesome! Thanks!
Didn't show me anything about installing a coil spring
godtar01.... did it occur to you that a video titled "how to install coil springs" should, well, show how to install coil springs?
... just a thought.
Thanks for telling me what you did....wish you would have showed me!!!
Lol. Im glad i fast forward everything
Same issue with my tube arms on my 68 impala. I decided I wasn’t fighting the fitment so I ground out the shape to a square
I bought it at oreilly auto,,,,they rent tools for free but i opted to purchase $50.00. good quality
good luck
I can show an engine in my car and talk about how I did it. I won't need a video. It will be just as informing as this.
Is the compressor broken or did you cut the end off the fork?
You can take a pipe wrench and a twist the spring into place. Another trick to save some time.
Would have been nice to show the tool in the spring. you can put the fork in two different ways... Also you will have 4 neutral gears with that 700r4 soon after bolting it to a 454. not a good tranny to use with that engine unless youre driving like an old ass man. You need a 4L80
Not helpful at all. Didn't even show how to use the tool. Fail
I AGREE 110%.. with you J 206 .ppl wanna see how YOU Used the tool!!..Step by step video....Not PRAISE THE TOOL!! ...what a useless -informative video! !!
Perhaps next time you can actually do what the title of your video says, "How to install coil springs".
The comments saved me from watching this….
What model is that compressor? I'm doing this on my vette and rebuilt the control arms but now I need to install the coil springs.
Show us how to use it. Spare me the rest
Dope.😊
Also you said it was hard to get the hook out when you was done? What is so hard about it. unscrew it all the way and open the hook up and it falls right out the bottom. I have a 64 Impala with the exact same A arms. There is all kinds of room to get it out
damm. u got me
Damn here I am looking for coil spring compressor how to and I come across this video so I was like sweet. I have the same exact coil spring compressor and I kept fast-forwarding waiting for you to do something. All you did was talk you didn't even show how to do anyting. Thumbs down
What just happened?
You didn't even show how to use the tool, thanks for nothing.
I compressed mine by hand... def a pain in the ass use a power tool for the love of christ
I'm tired of watching videos that claim to show you how to do something, and turn out to be just a big waste of time.
you didn't even show how to use it? WTF
Probably because he didnt do it. He probably had somebody else do it and he just watched.
Put me to 😴 sleep
dude you need help.
This isn't a how to video. It's a "see what I did today before I found a camera?" Video title misinformation for clicks i guess
Thanks for wasting my time
what a waste of time
Useless fkn video
I don't give a shit about the car. You didn't show a damn thing
TOO MUCH WORK, DO IT JACK WAY
Why hasn't this useless video been removed from TH-cam for its misleading title?
Never showed how to use tool. Wasted my time.
These coil spring compressors are garbage.
What a waste of time you didn't show how to do anything yap yap yap its pointless to explain something and now show how its done total lack of common sense
Blah blah to much rambling get to the point