Energetic COSTCO L.E.D Light Installation
ฝัง
- เผยแพร่เมื่อ 20 มิ.ย. 2020
- GET THE LIGHT HERE +( AMAZON )
amzn.to/3R2hVns
NOTE : YOU CAN CHOOSE BETWEEN DIFFERENT SIZES AND HOW MANY
Hey Everyone if my Channel Helps you save some money, please consider a small donation via this paypal link.
Paypal.me/GearmoAuto (link in comment section)
Need Professional Art? check out www.lopanart.com/
(Retro / Anime / Video game + more) - murals, paintings, Prints & more
ABC Kids Vehicle Book-(Letter Book For kids) (Helps Support the channel)
www.amazon.com/ABC-Vehicle-Bo...
Check out my Music Channel for Free Music for videos or Projects (And Tutorials)
th-cam.com/channels/941.html...
Also I have a Gaming Channel
th-cam.com/channels/AOC.html... - ยานยนต์และพาหนะ
GET THE LIGHT HERE +( AMAZON )
amzn.to/3R2hVns
NOTE : YOU CAN CHOOSE BETWEEN DIFFERENT SIZES AND HOW MANY
Thank you for this video. Just picked up this light. I found it easier to screw the ring on the flexible stud, let it hang, then put the glass diffuser on, and tighten. Also the copper and bare wire for me was wrapped around a nut. Thanks again!
Thank you so much. I was having a hard time trying to read the installation guide. After watching your video I realized it was easier than I thought. In my case I had to connect the black wire to a red wire.
Exactly what I wanted. Just installed 2 of them.
Thank you so much.
Nice tutorial, thanks. I would add that sometimes the power is fed through the fixture box, then split off to the switch. Always turn off the breaker.
There is almost zero downsides to turning off the breaker (other than a slight inconvenience). The downsides to leaving it on can range from discomfort to bankruptcy due to medical bills to disability to death.
I just bought 4 of these - thanks for the tutorial !
Thanks for the tutorial 👍
Great tutorial. Exactly what I needed to know.
This was very helpful. Thank You !
That green wire had me stumped, it's basically the bare copper wire. Thx for the video
My leds shorted on a power outage. Where can I find the led panel that goes inside so I can change it. Wouldn't want to buy a whole unit.
Same here. Any luck?
Me too
Thanks man!
Perfect
I have a light similar to this that came with the house when i bought it 6 yrs ago. It's burned out, how do i replace it? Do i need to buy a whole new one?
In a lot of reviews on the COSTCO people say the screws are to short, I just used the screws that was holding the fixture that I removed which were longer and everything went well , and I agree with pksangavaram with putting ring on flexible stud, then attach the glass and lift up from the ring and get the other 2 studs to go through the holes in the ring and while holding put on the other nuts
Thanks for tip on using existing studs from old fixture. Saved me a lot of aggravation .
From my ceiling fixture, I have a red, black and ground/bare coming out. Which ones would I connect to the Energetic wires?
If I connect the Red(ceiling) to the Black(Energetic), where would the Black(ceiling) go?
Gracias
The bare wire is the ground. LEDs will still work but then the install is not up to code I believe.
How bright is this light
Can you add actual connection of all the wires the video skips right through and I feel like cutting up all the wires in my house right now
Hi, I installed the same lamp but the little leds stay on like low dim. Should I need to check the ground cable?
Could be a loose neutral (white wire)
How do you dim the light of you don’t have a switch?
You'll need to replace the switch with a dimmer switch.
Connection is the same as a switch.
What if I have 2 black wires and 2 white wires? Do I only use one of each, or do I use 2 black/white wire to connect to the wires for the light?
Make sure that all two black wires to white ones are all connected together
What made it easier for me, was to partially thread the two screws and then line up the fixture. The screws will easily pass through the cutout and then you twist the fixture to keep it from falling. Instead of trying to blindly find a screw hole through the fixture. It can be very frustrating!
Hey bro , nice review. I been meaning to buy it at Costco. My only question is , is that white led light or yellow led. Because o don't have any yellow led at home. Everything is white led bright !
It's white light
Fuk i only have black and white from ceiling.. money back ON
Shoot. I only have 2 wires... black and white : (
must be an older home, you seem to have no ground wire
@@paulrobilotti9294 I know, what a bummer!
Any support Appreciated. Small donations help the channel grow.
Paypal.me/GearmoAuto
VENMO- @Gearmo-Auto
CASH APP - $GearmoAuto
CRYPTO- 34d49fai2nN4LzACynSjRhnbmugP6AuExD
I would love to make more content with better quality to help everyone save money and time. Thank you!
Dislike for having so many ads
Try an adblocker.