+R Fox We'll cheers to that! Any other viewers interested in these parts please visit the link down below. www.1aauto.com/shock-absorber-pair-monroe-32296/i/mnssp00085?TH-cam&CTA%20Comment&
Thank you for this video. My shocks are definitely bad, because I can shake the truck back and forth with one arm. And after i stop it continues rocking for about 2 seconds
Is there a torque spec for those fasteners? I also noticed that you did not use a cordless or air impact wrench to remove the fasteners. If there is heavy scaling or rust on those fastners won't hand cranking on them with a rachett have the potential for stripping them?
If you are replacing all suspension components( upper and lower control arms, front and rear tie rod ends and shocks) is there a recommended order of operation?
are the shocks and suspension the same for the sport trac and ranger? i have an 01 sport trac 4x4 and i am trying to lift it but i can’t find kits for the truck
+David M I have attached a link for the Front Shock Absorber Pair for the vehicle in this video. www.1aauto.com/ford-mazda-mercury-front-shock-absorber-set-trq-sba60197/i/1assp00321?f=1399576&y=2004
I got a 2001 4x4 sport trac I love it! But I got this affil squeak I think it the shock but man I can’t fined out we’re it is it’s driving me bananas 🍌
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Took me 30 minutes. My mechanic said ball joint had to be popped to do the job and a strut compressor was needed. You saved me $100. Cheers.
+R Fox We'll cheers to that! Any other viewers interested in these parts please visit the link down below.
www.1aauto.com/shock-absorber-pair-monroe-32296/i/mnssp00085?TH-cam&CTA%20Comment&
This video was extremely helpful for my 2003 explorer sport trac.. 1A.. Thanks!
Thanks for this video. I replaced the shocks on my 2000 Explorer, wouldn't have done that without first watching this. Thanks
This video is perfect for me. I need to replace my shocks on my 2004 Ford sport trac. Thanks for the video.
+red0means0go Thank you for watching. Please let us know how the repair comes out! 1aauto.com 888-844-3393
Thank you, i snapped the top end off the old driver side but was able to get both done in about an hour!
thanks for the perfect video replacement this shocks.
Thank you for this video. My shocks are definitely bad, because I can shake the truck back and forth with one arm. And after i stop it continues rocking for about 2 seconds
Is there a torque spec for those fasteners? I also noticed that you did not use a cordless or air impact wrench to remove the fasteners. If there is heavy scaling or rust on those fastners won't hand cranking on them with a rachett have the potential for stripping them?
If you are replacing all suspension components( upper and lower control arms, front and rear tie rod ends and shocks) is there a recommended order of operation?
Great video
Thanks for all the great videos. I will check out the website
Thanks for the informative vid! Keep 'em coming😄
Did you replace struts because of the inside wear on tire also?
are the shocks and suspension the same for the sport trac and ranger? i have an 01 sport trac 4x4 and i am trying to lift it but i can’t find kits for the truck
Thank you
Great video, thanks...
+Jim Johnson No problem. Thank you for watching. 1aauto.com 866-403-3393
Happy New Year
I got rear ended I noticed my left side rear strut is higher then the other . What can I do to fix it
+joel rivera You may want to have a local auto body shop take a look at it for you. Hope this helps you out. 1aauto.com
How much It cost pice of shock absorber ??
+David M I have attached a link for the Front Shock Absorber Pair for the vehicle in this video.
www.1aauto.com/ford-mazda-mercury-front-shock-absorber-set-trq-sba60197/i/1assp00321?f=1399576&y=2004
I got a 2001 4x4 sport trac I love it! But I got this affil squeak I think it the shock but man I can’t fined out we’re it is it’s driving me bananas 🍌
I cut all three of them I didn't waist on time