I took your advice from a while back and ended up upgrading my burner, and I may have possibly also bought a whole new devil forge along with the burner. And that forge is amazing, it melts copper and brass so fast.
Simple tip to keep your bottles from freezing off, use only approved propane lines and fittings... but if you use brass hardware for propane, you can create whatever setup you like... what I’ve done with my burner is feed the torch with one high pressure reg, fed by a tee that is fed from two 20 lb tanks. This way you draw less volume per tank, and cut flow rate to half.. rarely do bottles freeze off for me unless I’m near the end of a cylinder, but you get double the firing time on 2 full 20 lb bottles. Usually good for a minimum of 6-8 smelts before bottles need a change. Cuts time losses. Cool looking molds btw, I bet the c&c opens whole worlds in production of whatever you dream up. Glad there’s people out there that still make things as cool as any production line. But more unique 👍
Great work on the molds. That one had me a little worried cause it had some deep parts on it, it seemed a little hesitant to release. I had one that was a bit tall that broke after a few pours. Might have to look at getting 1 or 2. You plan on maybe doing some custom, Custom molds?
Just a question. What have you found to be the best crucible for melting in a 10 kg forge. Looking at building my own 10 kg forge soon. Building up supplies.
Artbyadrock you have seriously inspired me to start smelting and get more crafty in my garage. Thank you SO much flr your awesome videos. Question for a beginner like me, where should look to find scraps like you do? Alleys, junk yards?
Nice! Judging by how many people ask me to make molds (which I have no interest in doing lol) , I'm sure you'll do well at this venture! That deep socketed skull one won't last long though..I had one half as deep and after about the 5th or 6th pour I lost some of the details :(
Hello Artbyardock i watch every video of yours i saw your video in which you mould the statute of the indiana Jones movie model so can you please made make the statue of The Oscars award because oscars are coming. Thank you
AWESOME viddy once again you never disappoint, those new molds r FREAKING AWESOME good job on them so WHAT IS THE TIN FOR r u planning to do a mix of metals I know other people use tin to make stuff 🇨🇦😎👍🇨🇦😎👍🇨🇦😎👍
When making the mold are you using the V bit or a different bit? Also how long would you say it took to cut one mold? They look awesome and these are gonna be a great addition to the channel!
@@ArtByAdrock Could you perhaps hint at a price here, including shipping to NZ. Just so I know how much to put aside for it. Can not afford much on the dole, but would really love to have a great serpent coin, made by you. ☺
You could make a 3d t bookwo sides coin using tinkered then sandwich between two blocks then make the coin a hole insert pegs between the blocks not touching the coin then make a copy of the peg. Make the pegs a hole and put a cone as a pour ing hope just touching the coin then make the cone a hole. Pull the blocks apart and insert the pegs into one of the blocks make that block a joined piece then make the other block a separate join piece and now you have a mold to cast a two sides coin easily.
Awesome video bro! I watch your mate big stacked, that’s how I found your channel. Awesome work. I’m really interested in the molds that you made, I have a diving channel on TH-cam that does OK, but recently got into melting metals.✊🏼. Do you make custom molds? I would love a few coin molds that said “Polishmafia928” with a skull and crossbones... If this is something you would be interested in doing, maybe we could exchange emails and see what it would cost. Thank you for your time. And keep up the hard work!
Thanks for watching everyone! These molds and others will be on my website to order soon 👍🏻
I will be watching for them
What website?????
@@Sniper.925 his website, read the description section
donnie brown Yeah that was pretty dumb of me thanks
T34 strong
First time watching you pour I just found your page and plan on ordering some molds just fixing to get into making copper coins
Dude, these are f-ing AWESOME!!! 👍👍
Yeah... Like bigstackD....
Keep make treasure ...
I love it
I love the big skull coins🤩🤩
Great looking coins man .
Have you ever seen bismuth crystals made? That would be cool to do a metal melting video with bismuth.
Great pour with those molds. Thanks for posting today. It's been so dang cold and snowy. Melted copper warmed me right up. 👍👍👍
Sandwich the two molds together, drill a hole from the top and pour in the mixture, then you'll have a double sided coin
it's always fun watching copper melt, especially rusty copper, adds a nice green color to the flame :D
The design of your molds is really cool. Congratulations!🤜🤛
Another satisfying video to wind down to. Keep em coming! Always look forward to these.
That piece of all thread is strong! Love the coins bro.
excellent pours my friend!!! You are getting to be a pro at it!
Very nice. Definitely like the new molds
Those coins turned out great pal! And as always great video. Can't wait for next week!
Great job on the molds they look awesome!!
Those rounds are great, can't wait to order.
6:00 The gradient of the coins is really pretty.
Your work is great quality!
Outstanding looking coins. Love the color of the copper as it's being poured. . Cheers🍻🍻
Great video and quite a unique collection you have there! 😊
Beautiful coins! That's great, keep it going!
ah, midnight on friday and a new melt is here :)
Great video, I really like those molds !
I took your advice from a while back and ended up upgrading my burner, and I may have possibly also bought a whole new devil forge along with the burner. And that forge is amazing, it melts copper and brass so fast.
The new molds are awesome!! Great job! Got to share with BigStack
The pour technique is strong in this one.
Those turned out nice.
Man, those came out sweet!
Could you please do a little bit of nordic gold? It´s absolutely awesome.
Simple tip to keep your bottles from freezing off, use only approved propane lines and fittings... but if you use brass hardware for propane, you can create whatever setup you like... what I’ve done with my burner is feed the torch with one high pressure reg, fed by a tee that is fed from two 20 lb tanks. This way you draw less volume per tank, and cut flow rate to half.. rarely do bottles freeze off for me unless I’m near the end of a cylinder, but you get double the firing time on 2 full 20 lb bottles. Usually good for a minimum of 6-8 smelts before bottles need a change. Cuts time losses. Cool looking molds btw, I bet the c&c opens whole worlds in production of whatever you dream up. Glad there’s people out there that still make things as cool as any production line. But more unique 👍
That shelf is all and good, but you should really do a nice medium sized pirate chest, or a smaller one to put on that shelf...
I like your molds 👍👍👍
And great job on the coins
Man those r so freaking cool when I finger out a design for my channel I'll b hitting u up most definitely
Great work on the molds. That one had me a little worried cause it had some deep parts on it, it seemed a little hesitant to release. I had one that was a bit tall that broke after a few pours. Might have to look at getting 1 or 2. You plan on maybe doing some custom, Custom molds?
Yeah I will down the road when I have more time
Those coins are cool
Got directed over here from your buddy’s TH-cam page!
Very cool!
Wow them rounds are the $h!+, nice!
wow nice job!
I like the full skull cast! I want to buy! It will make my silver ingots look COOL! HOW MUCH?!
About time. It's still barely Thursday
What drill bit did you use on the CNC? Love the detail. Did you have to use a fan to blow out the dust when carving?
👍🏻
Hi, I'm a new subscriber. I found your channel from bigstack.
Great video bro
Thanks buddy 👍🏻
Very cool 😎
Just a question. What have you found to be the best crucible for melting in a 10 kg forge. Looking at building my own 10 kg forge soon. Building up supplies.
Definitely know your craft much respect brother working on petitioning to be accepted
Do you have a video for the large Aztec/Mayan Skull on your shelf? That is so awesome! thanks.
you did good on the molds you Should send your friend bigstacks some molds
I will be when I get more made 👍🏻
Artbyadrock you have seriously inspired me to start smelting and get more crafty in my garage. Thank you SO much flr your awesome videos. Question for a beginner like me, where should look to find scraps like you do? Alleys, junk yards?
Awesome
Super!!!
Awesome!!
You should cast some of these coins in silver like bigstackd
Very nice work right there m8 :)
I love your work! What CNC machine is that?
Sweet
Do you have any pointers on machining graphite molds with the cnc? Or an informational video about the process? That would be awesome!
What kind of feed/speed/etc settings do you use to CNC the graphite? I have a 3018 CNC and want to make a mold for a small project.
Amazing job man. A big Like from me!
Where do you buy crucibles....and that small molds?
Make a video casting a Viking sword.
Thank you.
Nice! Judging by how many people ask me to make molds (which I have no interest in doing lol) , I'm sure you'll do well at this venture! That deep socketed skull one won't last long though..I had one half as deep and after about the 5th or 6th pour I lost some of the details :(
Shoot me an email as I wanna ask you a few questions 👍🏻
Do you make yout own coin molds?!? I'd LOVE to see some "Hero's Guild" (From Fable) coins!!😋
Great job. Do you have a pet like bigstack?
Hello Artbyardock i watch every video of yours i saw your video in which you mould the statute of the indiana Jones movie model so can you please made make the statue of The Oscars award because oscars are coming.
Thank you
Hey. Can you tell me what kind of material you use for molds?
AWESOME viddy once again you never disappoint, those new molds r FREAKING AWESOME good job on them so WHAT IS THE TIN FOR r u planning to do a mix of metals I know other people use tin to make stuff
🇨🇦😎👍🇨🇦😎👍🇨🇦😎👍
Yes when I do Nordic gold I will be using it 👍🏻
When making the mold are you using the V bit or a different bit? Also how long would you say it took to cut one mold? They look awesome and these are gonna be a great addition to the channel!
Yes a v bit. They took about 5-6 hours for each one
oh a new chanel ?
Very nice :) Have you had the CNC for a while? I don't remember seeing it.
Great video! Do you know you will have coin molds available?
Omg can you make drachmas??? I would pay for it
Sick! Is there any way you can take requests to make and sell graphite molds? I want some custom ones!
Love the coins they look fantastic. Will moulds be available to the uk .
Yes but shipping could get expensive to ship there
Since you have a CNC have you ever tried a 2 sided coin by clamping 2 shallow sided molds together?
Hey how much do you sell your coin molds for. I've made a treasure chest and I want to make pirate coins. I'm interested in buying the molds.
Have you ever thought of trying to make some double sided coins? Two piece mold.
I thought one looked like the logo for hydra. Wasnt sure if you were a fan of marvel and doing some shield stuff haha
going to need to order those monkey island molds 🤘🤘🤘🤘
Please, please, please. How much do you want for the Serpent Coin? Would totally love to have one.
Another great melt from Andy.
I’ll put a couple up on my website soon 👍🏻
@@ArtByAdrock Could you perhaps hint at a price here, including shipping to NZ. Just so I know how much to put aside for it.
Can not afford much on the dole, but would really love to have a great serpent coin, made by you. ☺
You could make a 3d t bookwo sides coin using tinkered then sandwich between two blocks then make the coin a hole insert pegs between the blocks not touching the coin then make a copy of the peg. Make the pegs a hole and put a cone as a pour ing hope just touching the coin then make the cone a hole. Pull the blocks apart and insert the pegs into one of the blocks make that block a joined piece then make the other block a separate join piece and now you have a mold to cast a two sides coin easily.
Sorry about the spelling I'm using a tablet with auto correct.
Great work,how do i purchase molds from you please.
Awesome video bro! I watch your mate big stacked, that’s how I found your channel. Awesome work. I’m really interested in the molds that you made, I have a diving channel on TH-cam that does OK, but recently got into melting metals.✊🏼. Do you make custom molds? I would love a few coin molds that said “Polishmafia928” with a skull and crossbones... If this is something you would be interested in doing, maybe we could exchange emails and see what it would cost. Thank you for your time. And keep up the hard work!
Send me an email and we can talk 👍🏻
Hi, well done!! Where can I go to find out how much it will cost me for you to make a mold for my animal foundation? Thanks!
Contact me on my website, artbyadrock.com 👍🏻
@@ArtByAdrock Thank you!!!
Where did you buy you CNCmachine?
Hello sir love the videos so i was wondeeing if i made a design can you make a graphite mold i own a tavern and would like to make coins for drinks
I would like to have one of those coins how much are they
Those were the copper pipes from holland
Yes they were 👍🏻
Mail unboxing video please
Some of the coins that looked good before you polish them up it gave them some shadow affects
Could you make some mike the tiger coin molds for LSU fans and Trump 2020 coin molds as well
I need a metal made into a coin can you do that for me and what do you charge
Were is your guard dog?👍😀🤔🤔
How much for the molds?
Esta forma você vende
I'm like
Can you sell those molds in ebay?