Brush Arrow Rest, added to the bearings will eliminate the dust from entering the bearings, thanks for the video, I will be adding some of your idea's to my build. I've been researching for the flattening sled, to get the best sled possible, there are so many builds going on with lots and lots of idea's. thanks for what you do.
You should replace those linear bearings with bushings instead (McMaster calls them 'sleeve bearings'). They'll be much more tolerant of dust and debris, and they're cheaper too!
Thank you! Yes for me it just became tricky to mount and secure it using bolt as they would have to be inside the tube. It gave me a little more clearance and ability to adjust/align it as well.
Brush Arrow Rest, added to the bearings will eliminate the dust from entering the bearings, thanks for the video, I will be adding some of your idea's to my build.
I've been researching for the flattening sled, to get the best sled possible, there are so many builds going on with lots and lots of idea's.
thanks for what you do.
thank you very much, glad you enjoyed it and I could help!
You should replace those linear bearings with bushings instead (McMaster calls them 'sleeve bearings'). They'll be much more tolerant of dust and debris, and they're cheaper too!
Sweet.. ..thanks for the input for sure!
Is there a materials list ?
Sorry its not here but Ill add one for at least the main components
😁👍
Nice work. But why these supports ? Couldn't you mount the upper rails to the lower bearings?
Thank you! Yes for me it just became tricky to mount and secure it using bolt as they would have to be inside the tube. It gave me a little more clearance and ability to adjust/align it as well.
way too much work
ty
😒😒😒
What size machine screws fit the bearing blocks?
I used M6 1.0mm that matched mine though i took the block there to make sure. Hope those work for you!