RGB20SX Analog Stick Delete
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2024
- Printed some spacers for my RGB20SX. These were designed for the RGB30 but fit great. Download the file here created by NLD Design Shop www.printables....
I have heard reports of issues if you remove the left stick, but I chose to keep that one anyway.
Do you have the files for the back case without triggers? I'm thinking about using this solely for Pico8.
Everything is available on my Kofi
ko-fi.com/johntriger
Take a look and see what thickness you want based off if you are willing to mod the console. I recommend v1 or v2 for ease of Install as v3 requires Removing the rear triggers and finding a suitable battery to replace the stock one. I used a blackberry priv battery and still do to this day. One of the largest and thinnest I had in my collection.
1:26
Wow I see the battery's height is almost the same as the front housing when you paste it like that.
Any chance you could do a super thin back plate? As thin as possible!
Do you mean have it step down like the stock one? Or just keep it flat but make it as thin as possible while fitting the stock battery? Personally don't like the stair step look of stock. Maybe make a cartridge slot on top where it feels like you are playing a game haha.
@@Johntriger
No stair step, make it exactly like yours but thinner, (Like a smartphone), I'm not sure how thick the battery is, since I don't have one on hand, Possibly touching the back of the battery.
Better yet, by making a flat plate (flush with front bracket) with countersunk screws + changing battery to a "long flat" type like smartphones. I wonder how thin it will be.
Okay I'll mess around with the design and see how thin I can go with the stock battery. I have a couple of old Motorola z battery things maybe I can rip something out of that and use it.
@@Johntriger
That would be awesome!
Check out my latest short. Was able to get it to about 9mm thick vs the 11.5mm you see in the original model.