I was using the old guide and that step with the foam was seriously derailing the build. Like, I was certain that the contacts wouldn't meet properly if I actually followed through with that. Really glad I saw this on the sidebar. The old video still comes up first in search results, you may want to add 'outdated' to the title, and link to this one in the description.
After year of using the eXtremeRate Silver Real Metal Buttons I can say it was the beast upgrade i used for my controller man itis working with out any problems and i liked
I installed it a year ago. Works well up until a few months ago it would work then not work all of a sudden. I wonder if it's a bad connection or the ps5 update killed it.
Unless I’m mistaken (I’m on mobile) or somehow it isn’t available on my device, ExtremeRate absolutely needs to ensure these tutorial videos can be available in HD. These kinds of videos should never be stuck at SD resolution of that is the case.
Love your products and I was wondering if you guys had considered adding the SAX buttons that the Scuf envision pro has next to the triggers. I know that your remap kits have supported up to 6 remappable buttons since the DS4 version so you’d only need to add a bit of extra plastic to the back plate to hold the buttons in place. Possibly even button covers that work as a blanks like the envision has for the SAX buttons when one isn’t needed
Hardest part of mod was screwing the 2 small screws for the back plate they just didn't want to screw in all the what were your guys hardest part or a part you got suck on?
Pin me 0:38 start 4:04 Soldering the toch pad (if you dont wanna Solder dont take it out of its shell and skip to 9:20) 6:50 Soldering R3 & L3 9:20 instaling fpc cabel
this has nothing to do with paddles but the white button for L1 won't click for the mouse click triggers and i wanted to know if you had an idea how to fix it?
Possibly the main flex cable or the back paddles main board. Please contact our customer service via email at retail(at)extremerate.com for the replacement
Everything checked out passed every test but when i pair it says paired and does nothing at all,? Nothing couldn't figure it out Until i turned my controller off and then back on then it worked heads up with this issue
So I have to press super hard to get the k3 & k4 buttons to click any fix to this? So I found out that if you put some the eva tape over the k3&k4 it will make the buttons way easier to press. Also when putting on the back plate make sure you snug those screws pretty tight you don't wont that thing shifting when you press buttons.
I've successfully done this for my BDM-020 controllers. But for my BDM-030 controler, i followed the steps here (skipped all soldering since i dont need touch pad and L3R3), But the back buttons won't turn on. The red light won't turn on no matter what i press and hold. The only step I wasnt able to do was the sticky foam pad tape on each of fhe 4 corners of the main board. Is it realy that important that, without it, the back buttons won't receive power and turn on?
It worked for 2 Minutes and then nothing i tried to reconnect the Paddels in the back but After i hold the Button in the middle for seconds nothing Happend . What should I do ? I just sat Their for an Hour just for it to be broken After a Minute
Extreme rate. I thing your products are perfect but there is a problem. You see I took of my bumpers on my ps5 controller and tried to put on the Crome red, but it did not fit. It was to big on the inside of the bumper. And I customize my other one with gray bumpers and it was still to big. I’m not sure if this is my issue with my controllers.Thank you for your products
I have had this for 2 months and now it wont work on the first click on cod and I have to click it multiple times for it to work but it works fine with out playing a game ? has any one els have this problem
Thank you! finally i find someone with the same issue i have. mine worked really well even after i also installed the clicky trigger kit in addition to the back paddles. after a month or so the paddles wont work in call of duty. but they work in the ps5 menu and also in fortnite. i thought maybe the clicky kit was causing this and i wanted to find more information before i start removing the components and redo the whole thing or ask for replacements....
Thank you! finally i find someone with the same issue i have. mine worked really well even after i also installed the clicky trigger kit in addition to the back paddles. after a month or so the paddles wont work in call of duty. but they work in the ps5 menu and also in fortnite. i thought maybe the clicky kit was causing this and i wanted to find more information before i start removing the components and redo the whole thing or ask for replacements....
Do you mean the K1 cant't be press down and click (if so take apart the back paddle part and check) or it can click but can not activate (if so then you have to take apart the paddles part and re-plug the ribbon cable, and if the issue stand still, then please contact us info(at)extremerate.com for help)?
Hello, regarding the grip for the controller, do we have to take a rear shell with the integrated grip or can we add it afterwards? At least add a grip before installing the paddles?
Hi all, my English is weak, can I ask a couple questions to make sure of a couple points: 1) if I don't need the touchpad, can I skip soldering the small wire at the beginning without touching anything at all? 2) second point with the soldering can I not solder at all, but do it for a more secure fit? Does this apply to buttons r1, l1, r2, l2? Or in general for all buttons up to our future buttons (all buttons except touchpad)? OR if it is r3, l3 only, and I don't need r3 and l3, this wire is not needed at all and everything soldered in the video can be skipped? 3) Honestly, I didn't understand why the 4 black squares in the corners are needed. Thanks a lot for the video, could you please add the questions at the end in the “description” so I can throw them into the translator.
Hi, 1) Yes. 2)You can do not solder at all, only L3 R3 will not mappable to the back paddles. 3) The 4 black square plastic is required because it will help to secure the main board of the controller.
At around 9:30 when you "alilgn the connection points of the PF Rise FPC with with the controller conductive film and fix them together" do you remove the original film that is there? I can't get the back buttons to turn on and that is the only step I wasn't sure about so I just put the piece on top of the original film.
i recently bought the rise 4 kit with rubber grips but i was thinking of moving over to the rise 2 instead. if i buy the rise 2 standard will the rise 2 remap kit fit onto the rise 4 grip version instead of buying a whole grip version again?
Only difference between the old way and this way is that you don’t need to use the foam pad underneath the ribbon on the bottom of the board and you put those hard plastic pieces on the corners which they never tell you what they are for so not really a huge difference. Also just a personal opinion but the so called rubberized grips are just a different color texture plastic! Not a rubberized grip at all but atleast it has enough texture to make a difference I suppose.
Thanks for clearify for us. And for the rubberized grips, we can make them softer and then they will become really grippy but they will become undurable at the same time :(
@@Aaron6791ae yes I did use the little foam pieces to keep the noise down but also to help lessen the wear on the joints that it pivots on. Also may just be my personal preference but the slight resistance it gives the paddle feels better than it moving completely free. I will say that you should take your time to make sure and compress the squares and bend the paddle like in the video until it clicks freely with just a slight resistance shouldn’t be so hard to click the paddle that you can’t do it with a single tap of your finger. I prefer the rise 4 metal which is what I use on my controller but my son preferred the rise 2.0 metal which is what I installed on his controller. Both are great additions depending on your needs.
What happen to the ps4 paddles. I was so much easier to plug and play. Doing all this bullshit steps seem to be lot of work just to get slight advantage. You think technology would be getting easier
They did it this way just to get more ppl to but the dualsense. I assume that’s the reason they released official ps4 paddles 6 years after the console launched just to test the market for paddles
@@mohammada9715 I agree. There's just simply no way I'm going to spend $200 on a DualSense Edge just for the back paddles. That's the price of half a PS5 💀. I'd much rather buy this back paddle modification because even if it takes patience to install, it will save me a lot of money, will look cooler, and it's also a nice little fun project for me.
It's actually not hard u can skip most of the steps unless you really want to remap the TouchPad button and the r1 r2 L1L2 buttons. I felt like an idiot after finding this out.
Hey there! I am not able to find your PS5 great wave plates on your website I wanna order them and might as well some other things to make my ps5 creative can you please either send a link or restock if not in stock
The touchpad and L3 and R3 will work like normal of you skip soldering. You only have to solder if you want to remap one of those specific buttons to the Rise buttons.
I was using the old guide and that step with the foam was seriously derailing the build. Like, I was certain that the contacts wouldn't meet properly if I actually followed through with that. Really glad I saw this on the sidebar. The old video still comes up first in search results, you may want to add 'outdated' to the title, and link to this one in the description.
Thank you for pointing this out. We appreciate your suggestion!
After year of using the eXtremeRate Silver Real Metal Buttons
I can say it was the beast upgrade i used for my controller man itis working with out any problems and i liked
Just put the whole clicky kit, the led kit and the rise 4 paddle kit in mine today and it all 100% works.
I installed it a year ago. Works well up until a few months ago it would work then not work all of a sudden. I wonder if it's a bad connection or the ps5 update killed it.
Not sure but mine is still going strong 1 month later, so far so good
plz my friends , if i skipped L3 , R3 and touchpad soldering , will they work as normal after installation or will be completely dead , thx guys
@chokz9342 i did the r3 and l3 on mine and skipped the touch pad. The l3 and r3 is optional. Should still 100% work
@@t2dagg304 is the touch pad still working properly after skipping
Unless I’m mistaken (I’m on mobile) or somehow it isn’t available on my device, ExtremeRate absolutely needs to ensure these tutorial videos can be available in HD. These kinds of videos should never be stuck at SD resolution of that is the case.
Love your products and I was wondering if you guys had considered adding the SAX buttons that the Scuf envision pro has next to the triggers. I know that your remap kits have supported up to 6 remappable buttons since the DS4 version so you’d only need to add a bit of extra plastic to the back plate to hold the buttons in place. Possibly even button covers that work as a blanks like the envision has for the SAX buttons when one isn’t needed
Hardest part of mod was screwing the 2 small screws for the back plate they just didn't want to screw in all the what were your guys hardest part or a part you got suck on?
Pin me
0:38 start
4:04 Soldering the toch pad
(if you dont wanna Solder dont take it out of its shell and skip to 9:20)
6:50 Soldering R3 & L3
9:20 instaling fpc cabel
this has nothing to do with paddles but the white button for L1 won't click for the mouse click triggers and i wanted to know if you had an idea how to fix it?
Wat to do when no back light instaled correctly and buttons from controller working correctly 😢
Possibly the main flex cable or the back paddles main board. Please contact our customer service via email at retail(at)extremerate.com for the replacement
Everything checked out passed every test but when i pair it says paired and does nothing at all,?
Nothing couldn't figure it out Until i turned my controller off and then back on then it worked heads up with this issue
thx me and my cousin mount it in 25-26 hours
and no, we are not dumb
Ggggg
So I have to press super hard to get the k3 & k4 buttons to click any fix to this? So I found out that if you put some the eva tape over the k3&k4 it will make the buttons way easier to press. Also when putting on the back plate make sure you snug those screws pretty tight you don't wont that thing shifting when you press buttons.
I have a BDM 20 kit from my old controller, will this kit work on my new bdm 40 controller?
The back paddles light turn off after 10 seconds… how can I fix it.
The left bumpers and d pad doesn’t work for some reason any reason why on my part?
Got mine together and the red light (settings button) blinks 3 times fast. I’ve rebuilt it twice with same thing. How do I fix it????
I've successfully done this for my BDM-020 controllers. But for my BDM-030 controler, i followed the steps here (skipped all soldering since i dont need touch pad and L3R3), But the back buttons won't turn on. The red light won't turn on no matter what i press and hold. The only step I wasnt able to do was the sticky foam pad tape on each of fhe 4 corners of the main board. Is it realy that important that, without it, the back buttons won't receive power and turn on?
Same issue no power
It worked for 2 Minutes and then nothing i tried to reconnect the Paddels in the back but After i hold the Button in the middle for seconds nothing Happend . What should I do ? I just sat Their for an Hour just for it to be broken After a Minute
Ohh, my red light is only blinking 3 times, so this means I have to out everything out together and install it new?
Is it compatible with the bdm-050 revision?
Bro they gave me the wrong pins for the k3 an k4 I thought I was going crazy thinking there’s no way the other one could fit
Please contact our customer service for help at info(at)extremerate.com. The problem may not from the pins.
Is this also for BDM-050?
Extreme rate. I thing your products are perfect but there is a problem. You see I took of my bumpers on my ps5 controller and tried to put on the Crome red, but it did not fit. It was to big on the inside of the bumper. And I customize my other one with gray bumpers and it was still to big. I’m not sure if this is my issue with my controllers.Thank you for your products
How would you use the led light if they connect in the game place just sandwich the 2 connectors?
I have had this for 2 months and now it wont work on the first click on cod and I have to click it multiple times for it to work but it works fine with out playing a game ? has any one els have this problem
Are you pushing hard on the L3?
@ExtremeRate not really I hear It click so ik the buttons not the problem
Thank you! finally i find someone with the same issue i have. mine worked really well even after i also installed the clicky trigger kit in addition to the back paddles. after a month or so the paddles wont work in call of duty. but they work in the ps5 menu and also in fortnite. i thought maybe the clicky kit was causing this and i wanted to find more information before i start removing the components and redo the whole thing or ask for replacements....
Thank you! finally i find someone with the same issue i have. mine worked really well even after i also installed the clicky trigger kit in addition to the back paddles. after a month or so the paddles wont work in call of duty. but they work in the ps5 menu and also in fortnite. i thought maybe the clicky kit was causing this and i wanted to find more information before i start removing the components and redo the whole thing or ask for replacements....
@@violent_Vin ever find a solution?
I installed mine and all of the buttons click except for the k1 trigger. Am I gonna have to take the whole thing apart again to fix it?
Do you mean the K1 cant't be press down and click (if so take apart the back paddle part and check) or it can click but can not activate (if so then you have to take apart the paddles part and re-plug the ribbon cable, and if the issue stand still, then please contact us info(at)extremerate.com for help)?
Hello, regarding the grip for the controller, do we have to take a rear shell with the integrated grip or can we add it afterwards? At least add a grip before installing the paddles?
it does not work. I've done everything now and it does not work. blinking rapidly only, no steady light . jdm.030
Is that just a regular piece of paper he is using to help take out the ribbon cables?
I installed this on the bdm 050 but the vid should be updated so it will say it works
Its works?
So it works on your BDM-050 Controller?
@@T0m341 yes
Hi all, my English is weak, can I ask a couple questions to make sure of a couple points:
1) if I don't need the touchpad, can I skip soldering the small wire at the beginning without touching anything at all?
2) second point with the soldering can I not solder at all, but do it for a more secure fit? Does this apply to buttons r1, l1, r2, l2? Or in general for all buttons up to our future buttons (all buttons except touchpad)? OR if it is r3, l3 only, and I don't need r3 and l3, this wire is not needed at all and everything soldered in the video can be skipped?
3) Honestly, I didn't understand why the 4 black squares in the corners are needed.
Thanks a lot for the video, could you please add the questions at the end in the “description” so I can throw them into the translator.
Hi,
1) Yes.
2)You can do not solder at all, only L3 R3 will not mappable to the back paddles.
3) The 4 black square plastic is required because it will help to secure the main board of the controller.
Are you guys working on DTC for ps5 controllers?
Can you make a scroll wheel attachment for controllers
Can you install a BDM 020 on a 040 controller? I accidentally bought the wrong one
No
plz my friend , if i skipped L3 , R3 and touchpad soldering , will they work as normal after installation or will be completely dead , thx
At around 9:30 when you "alilgn the connection points of the PF Rise FPC with with the controller conductive film and fix them together" do you remove the original film that is there? I can't get the back buttons to turn on and that is the only step I wasn't sure about so I just put the piece on top of the original film.
Yes
No need to put it on top just replace the one that’s there
Sorry, reviving this. My paddles don't turn on either. No red light. Were you able to fix this problem?
Can i install this with the P5 BDM-030 Light Version Whole Clicky Kit?
Sure
Why is this installation tutorial uploaded after the rise4 v3 which is the latest model??
My BDM-40 controller got different touch pad then all of the touch pads you showed in the video. How can I find solder spot?
It is the upper golden touch point on the right. Directly next to the little numbers. Found the solution in the extremerate reddit sub.
What is the touch pad part for?
What do you do if the setting button doesn't work?
Did you ever figure it out?
Any updates on the mouse click triggers for the bdm-040 PS5 controller?
Soon
@@ExtremeRatelesss gooo
i recently bought the rise 4 kit with rubber grips but i was thinking of moving over to the rise 2 instead. if i buy the rise 2 standard will the rise 2 remap kit fit onto the rise 4 grip version instead of buying a whole grip version again?
Why do you want do that?
Only difference between the old way and this way is that you don’t need to use the foam pad underneath the ribbon on the bottom of the board and you put those hard plastic pieces on the corners which they never tell you what they are for so not really a huge difference. Also just a personal opinion but the so called rubberized grips are just a different color texture plastic! Not a rubberized grip at all but atleast it has enough texture to make a difference I suppose.
Thanks for clearify for us. And for the rubberized grips, we can make them softer and then they will become really grippy but they will become undurable at the same time :(
Omg I was panicking so much thinking I had lost that part thank you so much for clarifying
Wanted to ask you did you use the eva tape to make them less noisy or did you go without this part 24:10 in video?
@@Aaron6791ae yes I did use the little foam pieces to keep the noise down but also to help lessen the wear on the joints that it pivots on. Also may just be my personal preference but the slight resistance it gives the paddle feels better than it moving completely free. I will say that you should take your time to make sure and compress the squares and bend the paddle like in the video until it clicks freely with just a slight resistance shouldn’t be so hard to click the paddle that you can’t do it with a single tap of your finger. I prefer the rise 4 metal which is what I use on my controller but my son preferred the rise 2.0 metal which is what I installed on his controller. Both are great additions depending on your needs.
Are you guys able to make bdm-040 mouse click triggers and bumpers, with clicky face buttons as well?????
Very soon
I did this and now my controller does not vibrate anymore. It makes a sound as if it want to vibrate but it is stuck. Anyonye found a fix?
U probably destroyed the green and yellow wire on the motherboard
Has anyone else’s have trouble getting the metal bars into the metal paddles at around the 25.56 mark I’m stuck 25:56
I am! Its so frustrating. They are too long and the spings inside wont let me push both pins down.
for some reason when i installed the kit my controller would turn off everytime i pressed L3 (i got real metal buttons)
Please contact our customer service info(at)extremerate.com and we will send you the PC plastic pads and then install them as we did at 11:29
For when Clicky Hair Trigger Kit for bdm40?
Soon
Can you make a mouse click triggers for bdm 030/040
It exists but from another company don’t know their name though
th-cam.com/video/Xk4ki0JYxmA/w-d-xo.htmlsi=osUcvSKpbxT5hDSk
What happen to the ps4 paddles. I was so much easier to plug and play. Doing all this bullshit steps seem to be lot of work just to get slight advantage. You think technology would be getting easier
They did it this way just to get more ppl to but the dualsense. I assume that’s the reason they released official ps4 paddles 6 years after the console launched just to test the market for paddles
@@mohammada9715 I agree. There's just simply no way I'm going to spend $200 on a DualSense Edge just for the back paddles. That's the price of half a PS5 💀. I'd much rather buy this back paddle modification because even if it takes patience to install, it will save me a lot of money, will look cooler, and it's also a nice little fun project for me.
It's actually not hard u can skip most of the steps unless you really want to remap the TouchPad button and the r1 r2 L1L2 buttons. I felt like an idiot after finding this out.
Yep they are not going to sale back paddle attachment when they got the dual sense edge they are trying to sale for a lot more money. $$$
What can i do If Red light never appear??
Is it possible to map 3 buttons to one paddle?
Hey there! I am not able to find your PS5 great wave plates on your website I wanna order them and might as well some other things to make my ps5 creative can you please either send a link or restock if not in stock
Do you mean the console plate?
if I just want to map X and O - what do I do?
My new PS5 touch pad does not match any of those pads
Basically it doesn’t require soldering if I only need figures button or dpad?
correct
Why soldering I looked in the Amazon description and it said nothing about that
If you don't need the touchpad button and L3R3 mappable, then you can skip the soldering process
If I didn’t get very part delivered to me can I get refund, I order for bdm10 and Bdm 20 and I don’t believe I got the foam pad that’s needed
So the foam under the FPC cable is no longer needed?
How come other tutorials don’t show the touch pad part I am so confused now
Bc it’s unnecessary, unless you want to map your back paddles to the touchpad specifically, same for l3 and r3
Hello ExtremeRate, can you tell me if you have a picture of where the additional buttons and backlight are installed in the Dualsense(BDM 20)?
quick question if i were to skip soldering . will my touch pad still function the way it does? and i just wont be able to remap it?
The touchpad and L3 and R3 will work like normal of you skip soldering. You only have to solder if you want to remap one of those specific buttons to the Rise buttons.
Can u solder l3 r3 later when u feel like it? Or do u have to do it the moment u install the rise 4 kit?
Whenever you want
Thanks expert!
Are metal less sensitive to press? Like harder to press? I got the normal ones and their too soft/easy to press for my liking.
Yes, the meal version need more force to press when compare to the plastic version.
I bought the regular on amazon. Can I exchange to metal? @@ExtremeRate
What can I do besides soldering?
I have a question can i put the paddles kit and this kit together amd what should i put first and whhat sre the complications
I mean clicky kit
Tienen tutoriales en español?
I didn't get the the pins for the buttons
Dose it work in dualsense edge ?
no
No
Why would you want to put a $50 dollar mod, on a $200 controller anyways.
when is the new face clicky v11 for ps5 available?
For the BDM040? It's about to come.
Can the bdm-030 kit be used for the bdm-040
Puedo instalar las luces led y las palancas juntas?
What is the touch pad part for
Mouse click triggers for Bdm40?
Soon
Does anyone know If it applies to Europe because it is made in China.i order BDM-030 and i m in Europe.pls someone to answer…
Yes, please check the description
What description???
Installed and k1 is really hard to press, did everything as shown, any tips???
goddamn dude why didn't they just take the old video down and give us the new link in the box. wtf is wrong with them....😮 holy fuck
Ok nvm im fine with my disadvantage
Why?
@@Aaron6791ae too much work too much lazy
So it has become harder to do
Oppose to when?
man this music is annoying
Why is there so many useless steps?