ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2022
- Buy YOUCANIC Pro Scanner
www.youcanic.com/scanner/
Get Factory Service Repair Manuals & Specs
www.youcanic.com/manuals
Ask Car Questions & Get Help
www.youcanic.com/forum/ This video is a comprehensive guide on replacing the 2009-2016 Volkswagen Tiguan water pump. The tutorial is presented clearly and easily, making it suitable for both experienced mechanics and DIY enthusiasts. The presenter takes you through each step of the process, from accessing the water pump to removing it and installing a new one, ensuring that viewers understand what's required. With helpful tips and guidance throughout the video, this tutorial is an excellent resource for anyone looking to replace the water pump on their Volkswagen Tiguan. Whether you are experiencing issues with your vehicle's cooling system or simply looking to carry out routine maintenance, this video will be a helpful resource.
The video is based on a 2014 VW Tiguan equipped with a 2.0 L TSI four-cylinder gasoline engine and automatic transmission.
For more help with this vehicle, visit:
www.youcanic.com/volkswagen/t...
To troubleshoot Volkswagen Tiguan problems, check out this article:
www.youcanic.com/diagnose-veh...
Applicable to model years 2009, 2010, 2011, 2012, 2013, 2014, 2015 and 2016. May also apply to other models equipped with the same engine.
This video may apply to other models equied with the 2.0 L TSI engine inclduing:
Volkswagen / VW:
MK5 GTI 2008.5-2009
MK6 GTI 2010-2014
MK5 Jetta 2008.5-2010
MK6 Jetta 2011-2014
B6 Passat 2008.5-2010
CC 2009-2015
Eos 2008.5-2014
Tiguan 2009-2015
Beetle 2012-2015
Audi:
A3 2008.5-2014
TT (MK2) 2008.5-2014
If you need help with your car questions please visit YOUCANIC then click on the Support tab. 👉 Buy *Powerful Diagnostic Scanner*:
www.youcanic.com/ucan2
A Full System Diagnostic Scanner that works on all vehicles. Can read and clear codes from any system, module, control unit including engine, transmission, airbag, ABS, traction control, climate control, blind spot monitoring, air suspension, door modules, immobilizer just to name a few. Bidirectional support.
🆘 Get help with your car questions:
www.youcanic.com/support/
📧 Contact Us
www.youcanic.com/contact/ - ยานยนต์และพาหนะ
Thank you for putting this video up. This video helped me replace my water pump on my VW Tiguan.If it was not for this video, I would have to go to a shop and get it fixed. This was, instead of spending a lot of money, I was able to get a new pump and fittings for $60, and get the job down. Thank you so much!
We're delighted to know our video contributed to your successful DIY water pump replacement on your VW Tiguan! This is exactly why YOUCANIC exists - to empower car owners, help them save money, and instill confidence under the hood. Check our site (www.youcanic.com) to explore more guides, free resources, and use our beneficial YOUCANIC scanner. We even provide factory repair manuals for more complex tasks! Feel free to reach out anytime you need assistance, we're here to make your car ownership journey a bit easier.
Really good video, just replaced the water pump last week. On our 2013 Tiguan, we could not take the intake off, we found a intake support bracket that needed to be removed. Its hidden, it connects between the throttle body and fuel rail on the intake and the other end bolts onto the engine. Its also tough to get at. Once we found the support bracket, everything else was per the video..
Is there any way you can take a picture or describe better? I have the manifold loose but can't get it all the way off.
Awesome, was quoted $1500 by the dealer, that didn't sound right so I looked into how to do it myself. They were also trying to talk me into getting a new car due to mine being at 150k miles and being paid off for awhile. I had only ever changed my oil before and was nervous to really take anything apart. I was shocked by how easy this process was, with the hardest part for me just being how to unclip the electric connectors without damaging them. Bought an aluminum pump for $70, decent ratchet and the needed bits for $80, new manifold gasket for $20, new coolant for $30. This learning process was great, bought the repair manual as well. I am going to keep my Tiguan going as long as possible, forget about a new car!
Thank you for your comment and congratulations on the successful repair! At YOUCANIC, we are all about helping car owners like you feel confident with DIY maintenance and repairs. Do make use of our free guides, resources and the YOUCANIC scanner to facilitate your future fixes. Continue to explore www.youcanic.com and get in touch for any assistance. Remember, we are here to empower and support you throughout your car ownership journey. Keep going strong with your Tiguan!
Excellent instructions! Don’t attempt this without watching this video.
Thanks for the video, but you forgot about a bolt that stabilizes the intake that will not allow you to take the intake off. Killed me figuring it out. I was pulling my hair out man lol.
Having same problem, how do you get at that bolt?
@@brucewilcox4135 there is a bolt that connects the stabilizer to the engine block. Thats where I was able to get to it. Be careful when you take the intake out. I ended up yanking the thermostat wires out of the sensor in the water pump. Had to replace the sensor harness lol.
@@russellburgan9023 thanks for the quick reply and then warning!
@@brucewilcox4135 I don't get notifications for TH-cam comments for some reason. I just happened to go to the tube and see your comment. Hope you get it fixed.
This is where I've been stuck too. From reading on forums, a lot of mechanics and even dealerships will not put that stabilizer bracket back on because it's a pain. On mine there is a nut that I could reach under the manifold, but that doesn't do any good because the bolt won't pull out of the bracket. I need ot use a #10 square d bit to pull out the bolt at the bottom of the bracket, which looks like it will be something I'll have it do from underneath when I get the right bit. Some people also said that they have ripped the coolant wires unintentionally by having that bracket snag then when pulling out the intake manifold. Hopefully it comes out smooth whne get the #10 triple square. The but under the top of the bracket is 1/2 or 13mm, but i think you can just remove the bolt at the bottom of the bracket.
Thanks for this video.
I have a friend with a 2014 Tiguan that has just done a water pump.
This video was great.
Very helpful.
Thank you guys is the best video ever and the details are accurate.DIY
Thank you for sharing your knowledge sir. Bless you
Wonderful job!
This is one of the best videos I have seen on this. I don't understand the four bolts on the bottom of the manifold. In photos of this part it only shows the 5 holes at the top.
2 10mm studs on the ends and 2 t30 torx hidden best access point is through the upper sides where the throttle body meets the manifold
Thanks for the video... don't try changing the waterpump without watching this first!
graciasn por su video muy bien explicado.
Are there o-rings on the fuel rail where it connects to the engine. I am going to attempt this repair and I am concerned about a fuel leak after I reinstall the intake manifold.
The coolant system diagram shows the hoses attaching to the water pump reverse of how you installed?
Anything needs to do after the replacement? For example, using software to match the new pump to the car?
Engineers couldn't have put this in a tighter spot if they wanted to
Right? Typical German engineering.
For a wearable part, they sure put that thing in the most difficult place possible. Dealer wants $1,900 to replace!
Dealer wanted $600 for waterpump and $1,500 labor🤬 I got the whole metal pump on ebay for $100 and labor $500😂
Thanks for the video I really appreciate it. Remember to take of the manifold support bracket. Wasted a lot of time wondering why the manifold didn't come off after I watch the video. Center bottom of the manifold 13mm nut top of the bracket. Bottom of bracket connected to the block by torx bolt.
Hello and thank you for your valuable feedback! We're glad to know that our video was helpful and we really appreciate your additional tip regarding the manifold support bracket. Sometimes it's these small but vital details that can confuse folks, so your contribution definitely matters to us, and to all our viewers who will be reading this comment.
Our primary goal at YOUCANIC is to assist users in their car repair journeys, and we take on board all the comments to improve our future content. Should you require a professional diagnostic scanner for advanced auto troubleshooting, do consider our YOUCANIC Pro System Scanner. You can check it out here: www.youcanic.com/scanner. For those seeking access to Factory Repair Manuals and Torque Specs which are incredibly essential for DIY car repairs, you can access them here: www.youcanic.com/manuals. Again, thank you for your support and for choosing YOUCANIC!
Once the water pump was back in,and the injectors where connected, was there a plug from the wiring harness that plugs into the water pump?
Thanks so much for this video, instruction very clear and I was able to do the whole water pump replacement and assemble everything back in my Tiguan 2017, nevertheless after finishing and trying to start the car, it cranks but it does not fire up, no matter for how long I tried the car does not fire .
I have checked all connection and pretty confidence everything is plug back correctly,
Does anyone went through similar experience or do you have any tips, thanks!!
Thanks for reaching out and glad to know the video was helpful! If your car isn't firing up, there could be a multitude of causes. We'd love to help you troubleshoot this on the YOUCANIC website where we have more resources and our powerful YOUCANIC scanner tool.
Our goal at Youcanic is to empower car owners like you with the right resources. We offer comprehensive guides, factory repair manuals, and a community of car enthusiasts ready to help. You can find all these resources on our website at www.youcanic.com. We are here for you every step of your car ownership journey. Keep us updated!
@YOUCANIC Thanks so much for this well documented and thorough walkthrough ! Saving the wife, newborn, and me $1,500 from PepBoys! Chapmen VW Dealer didn't even have the courtesy to return my 2 calls for parts and labor, pathetic! Plus I got a quality cast aluminum Dorman part for $200! Four questions please. 1) What/How to clean the injectors? 2) Rub. Alcohol ok to clean gasket mating surfaces? 3) Vasolean ok as lube for good gasket seal? 4) Is my 2017 Tiguan 2.0 TSI even diff than 2016 (I haven't noticed)?
Thanks!
Thank you for your comment! We at YOUCANIC are passionate about providing resources for car owners to feel confident managing their vehicle's maintenance. We provide helpful guides, a powerful YOUCANIC scanner, and even factory repair manuals for all your needs. Visit us at www.youcanic.com for more information or if you need any further assistance. We're here to empower and support you throughout your car ownership journey!
NICE JOB！
Hello, thank you for your positive feedback! Our aim at Youcanic is to empower car owners like yourself with useful guides, resources and tools like our powerful Youcanic scanner, allowing you to tackle car maintenance with ease and confidence. Visit our website, www.youcanic.com, where you'll find all these resources and more.
If you ever need any assistance or require factory-level repair manuals, don't hesitate to ask us on the Youcanic site. We're here to support you throughout your car ownership journey!
Thanks so much for the detailed explanation. But will ask. How much man hour did you put to this?
Hello, thank you for your comment! It's great to hear you found our video helpful. The time it takes to create our detailed guides varies, but our primary goal at YOUCANIC is to empower you, the car owner, to feel confident working on your vehicle.
We offer many resources including free guides and a powerful scanner tool on www.youcanic.com. Additionally, we offer factory repair manuals for those needing an extra level of detail. Don't hesitate to reach out if you have any further questions. We're here to support you on your car ownership journey.
why isnt just the impeller and bearing housing changed why the hole housing
I bought a new pump and it does not have that sensor included. Very informative video though.
thanks for video In my case we are going to replace the chain set the pump is still fine. Is it wise to replace the entire pump with housing or just the pump itself?
And is INA pump ( 130$) a good one for replace it ? Or need to pay 50 dollar more for Hepu ?
Thanks for your question! We recommend replacing whatever parts are needed to keep your vehicle in the best condition. As for the brands, both INA and Hepu have their own strengths, it's crucial to consider which component suits your car best. You might want to explore our website www.youcanic.com where we offer tools such as our YOUCANIC scanner and a plethora of free resources to assist you with your queries.
Remember, we're here to empower you throughout your car maintenance journey. Feel free to visit our site for detailed repair manuals and additional support.
@@YOUCANIC Thank you for answer .
than i will replace it with the housing. And i think Ina and the hepu will both oke
Was that clear water? Sure didn’t look like coolant.
Is that a stretch timing belt?
The video doesn't clearly specify whether it's a stretch timing belt or not. However, we at YOUCANIC provide extensive resources to diagnose and repair your vehicles, you can use our Full System Scanner to get more detailed information: www.youcanic.com/scanner.
Also, feel free to ask any car-related questions on our platform: www.youcanic.com. We aspire to make car repairs understandable for everyone. Let us know if you need further assistance, we're here to be your reliable source for all things automotive!
Does this car have 2 ECT sensors
I need to know
اين يوجد حساس الحرارة اخي ...
Be lucky, cause if your 6' tall, your back is going to fatigue about half way through this process. Lol
Thanks for the feedback! Our aim is to make the car repairing process easier for everyone, regardless of their height. As you pointed out, diagnosing modern cars can be a challenge which is why we developed the YOUCANIC Full System Scanner. You can learn more about it here: www.youcanic.com/scanner
To ensure you get the job done right, you might also need help from our Factory Repair Manuals and Torque Specs. These resources give you professional advice and tools at a reasonable price. Find everything you need at: www.youcanic.com/manuals Enjoy your car repairing journey with us!
that pump came with new belt and he forget to replace
No need to replace original belt if not damaged!!!
should have changed out the water pump belt since you already took everything apart! Never leave old belts when changing these components! Thats my rule of thumb
I've done probably 25 water pumps. I've never changed that belt. It is such a pain to replace it. If it's not cracked and broken looking. I leave it. It's not a high tension belt.
thanks for the video. just helped me decide not to buy a used tiquan
Thank you for your comment! We're here at Youcanic to empower car owners like you with helpful guides, free resources, and tools like our advanced Youcanic scanner. Our aim is to help you save money and maintain confidence when dealing with car maintenance. Feel free to explore www.youcanic.com for more resources.
If you need further assistance, reach out to us on our site. We have factory repair manuals available for in-depth understanding. Remember, Youcanic is here to support and guide you on your car ownership journey!