Flashing Lights on Washing Machine How to Repair Hotpoint, Ariston, Indesit & Creda, Plus many More
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- Get your appliance fixed faster! Click the link below to browse our supplier's huge selection of appliance parts and support the channel at the same time! (repairpartstea...)
Tutorial: www.how-to-rep...
680uf 10V capacitor www.how-to-repa...
We are working on a tvm570 but this is usually the fault with most boards flashing like this.error faults are available at our website for all makes. You should always discharge capacitors before handling them, uf stands for micro farads and the % stands for tolerance level either side of the uf
If your appliance has individual flashing lights or combination of lights see our website for different tutorials.
Important update I have put an update on at 4 minutes
While doing the voiceover on this video I made a mistake and said the white dot is the positive it’s the other way round!! The white dot is the negative the positive is clearly marked.
We all make mistakes and I am sorry to our viewers plus it was obvious to see.
Please remember to subscribe to our channel
www.youtube.co...
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or the website on your timeline. This helps us a lot and if we really helped you can always buy us a beer how-to-repair.c...
Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going.
TH-cam. / apart4u
Facebook. / how.to.repair.appliances
Thank you so much Sir! I also managed to repair Hotpoint WF541 Aquarius washing machine with all lights flashing, i took the board out, same bulging cap, I replaced it with a 1000uf 25v slightly bigger than original cap and the cover fitted OK, the machine now works like new, many thanks indeed, saved my self a fortune and the cost of this cap 25p, plus about an hour of my time. Brilliant!
Iam Glad we could help you. If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel
th-cam.com/users/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
TH-cam. th-cam.com/users/Apart4u
Facebook. facebook.com/how.to.repair.appliances
Thank you! I spent so much time interpreting fault codes and looking into a pressure sensor replacement etc. After watching your video, I took the board out, and behold! two blown capacitors. Replaced them and now the machine is working!
I posted a comment about a week ago so now the update. So pleased with myself followed your instructions to the letter. Plus your great tip to take photos of were the wires should be when reassembling. Capacitor was dome shaped unlike the others, it cost 59p at Maplins to buy replacement & it sorted out the flashing lights. Will now concentrate big time to see if I can muster the courage to change the bearing as the spin is noisy. Thank you so very much. Kindest Regards Fran
That's great. I followed the steps and I fixed my washing machine for the first time in my life. Thank you really appreciated.
Heads up it did work and I just done it again. that's made my mothers machine last just under 5 years since last fix.. and saved her buying a new one again !! lol many thanks for the great vid
Just fixed a Hotpoint WT721 - same fault, C17 & C20 domed, bought replacements locally, despite not having soldered anything for many years, managed to get the old ones out and the new ones in, put it all back together and it works!!!
Thank you for leaving a comment, I would love you to leave your opinion on our poll about manufactures building in obsolescence to appliances. th-cam.com/users/postUgkxygHomnUySd_bYjaJBdEHPO6T4dYo9Ahm
and this is for you th-cam.com/users/shortse432SAb2g08 please remember to subscribe as that's is what keeps this channel going. Thanks 👍
Yet another revitalised machine, many thanks!
I have just replaced all three caps on the board of my Indesit WITL 105 (this is a top loading model, but it has the same board as described here). No flickering LEDs anymore, and it is washing again :-)
Although I had to buy a new soldering iron (my old one doesn't get hot enough for the lead-free solder used on the board), this was still much cheaper than having it done by a service technician.
+Pascal Le Bail I am glad I could help you with this problem.Please remember to Shop with www.how-to-repair.com and it would help us by posting the
video or website on your social media timeline & remember to mark us to
your favourites. This helps us a lot and if we really helped you can always buy
us a beer how-to-repair.com/help/buy-paul-a-beer/TH-cam. th-cam.com/users/Apart4uFacebook.
facebook.com/how.to.repair.appliances
Thanks, Paul. We got the capacitor from our local TV shop, just like you said and repaired the machine for 2 euros. Brilliant. certainly going to buy you a pint.
+Glynis Thomason I am glad I could help you with this problem. thanks for the beer GlynisPlease remember to Shop with www.how-to-repair.com and it would help us by posting the
video or website on your social media timeline & remember to mark us to
your favourites. This helps us a lot TH-cam. th-cam.com/users/Apart4uFacebook.
facebook.com/how.to.repair.appliances
Thank you so much for this tutorial video. I was at the point of through away my washing machine and buying a new one. After watching this video i ended up buying a 30p capacitor and it worked the magic. Tutorials very simple and easy to follow. Saved me some money.
This is a great channel and I 've learned several tricks of the trade.
It is advisable to check all the components ( pump, valves, motor, door lock etc) before replacing the circuit board ( new or repaired). Usually, things blown in the circuit board are due to short circuits in some of this working parts. Cheers!
Thank you to this video !!!
Was getting charged £100 as told needed new circuit board !
Found this and noticed same problem I was having !
Can't believe the small part needed was 99p !!!
And followed this video and machine is now working !
Much appreciated .
+bambi96677 I am glad I could help you with this problem.
Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going.
TH-cam. th-cam.com/users/Apart4u
Facebook. facebook.com/pages/How-to-Video-Tutorials-on-Domestic-Appliances/129280853751256
Google plus.
plus.google.com/+How-2-repair/posts
if we helped you can always buy us a beer how-2-repair.com/buy-paul-a-beer/
Great video and very simple repair, even for people with no experience of soldering/circuit boards etc.
Followed the instructions and hey presto my washing machine lives🤟😎 was quoted £130 with call out to replace the board. Thank you Paul.
ace...worked a treat :-) got a capacitor for £1.39 on eBay...followed your instructions and now have a working washing machine again ...Thank You!
Beer or even Beers on the way Paul...cheers
+q10a I am glad I could help you with this problem.
Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going.
TH-cam. th-cam.com/users/Apart4u
Facebook. facebook.com/pages/How-to-Video-Tutorials-on-Domestic-Appliances/129280853751256
Google plus.
plus.google.com/+How-2-repair/posts
if we helped you can always buy us a beer how-2-repair.com/buy-paul-a-beer/
Brilliant video thanks. We purchased the part from you, it arrived within 2 days (and that's over the Christmas break) its been fitted and my washing machine is now working!!!! We were going to buy a new machine...thanks
Fantastic video! I'm clueless with this sort of stuff and never soldered in my life, this video made it easy! Saved me a fortune too.
Great piece of information
Two of the capacitors were swollen on my board the 680uf
and 470uf replaced both and machine faults cleared and ran perfectly. Many Many thanks
Thank you so much. Using this video I have fixed my washing machine. Fantastic service. Enjoy the beer.
Excellent video, glad you re-published the correct capacitor polarity, it did confuse me at first. Your tip to photograph connectors was good. I put a bit of coloured tape around each connector loom and took a photo every time I disconnect a connector. At the end it's probably a good idea to test the flashing lights go out before putting back and securing all the components. It gave me a little more confidence before reconnecting the washer to the water supply & drain.
Thanks.
Thank you so much. My dryer (Ariston) had the same symptoms.. This video made me brave enough to do all steps and... my dryer is finally working as never before :) Anyway, there were 2 exploded capacitors..680 and 470uF, 10V. I replaced them with voltage of 16V but in accordance with electronic parts seller, it does not matter. THANK YOU SO MUCH for that video.
Just like on your video the same capacitor was bulging at the top (10v/680μF/105 C). I replaced it and the wachine machine works fine (Indesit WIXXL 86).Minimum cost 140€ for the circuit board plaque plus about 50 € for the technician fee. I only bought a capacitor 0,123 cents. THANK YOU SO MUCH.
Nick DouralisI won't forget to stand you for a beer
Brilliant tutorial, great clear voice when giving instructions. I have flashing lights Indesit model wil 123 so certainly feel confident to have a go. Also been told bearing may need replacing as spin is noisy. But I guess that's another tutorial and maybe this female will resort to some hair pulling in sorting that. Thanks again
Thanks for posting it worked a treat, capacitor was domed as you warned and I ordered capacitor from RS at 5:30pm and it arrived 7:45 next morning (couldn't believe how fast ) 5 units, I went for the 16v ones incase the voltage is spiking which caused the breakdown to occur as the size was the same.
The only thing I couldn't work out was how to remove the top. I unscrewed the 2 screws at the back and tried pulling and lifting but seemed well stuck. I noticed a crack on the top front plastic so didn't want it to travel any further so just went direct to the circuit board. Cheers.
Thank you for explanations. In 20 minutes my washing machine was alive again. Thank you again.
I am glad I could help you with this problem.Please remember to Shop with www.how-to-repair.com and it would help us by posting the
video or website on your social media timeline & remember to mark us to
your favourites. This helps us a lot and if we really helped you can always buy
us a beer how-to-repair.com/help/buy-paul-a-beer/TH-cam. th-cam.com/users/Apart4uFacebook.
facebook.com/how.to.repair.appliances
Excellent work Paul! Capacitor didn't look blow but replaced anyway. Working like new now! Beer coming your way as soon as the cheque cleared.
Thanks a lot mate.
😆
glad i could help saved you buying new board or pcb. they are hard to tell if there blown
I have just carried out this repair. I have never previously attempted soldering so it was a bit of a gamble. My big mistake was to buy a soldering iron that did not get hot enough to DE-solder the lead free solder on the PCB (Duratool soldering iron from ebay), So after a bit of struggle removing the old capacitor I thought I might have damaged the PCB. I re-installed the PCB with little faith in it working,plugged in the machine,loaded a test wash and - Da Daaaaaaa! it worked....Knock me down with a feather!!!!!!
Wow !!! This worked perfectly on my hotpoint aquarius wf541 washing machine. THANK YOU VERY MUCH GREAT VIDEO SAVED ME A SHED LOAD OF ££££££££££££...👍👍👍😉
Hi Paul
Have done the Facebook and Subscribed to your TH-cam and commented.
Thanks again, the video was perfect for our needs and detailed enough, even the advice about where to buy the capacitor - and we usually have difficulty finding parts as we live in Spain.
Best regards
Had to use a 25v version of that cap but I'm sitting here now, listening to the sweet music of the laundry being washed. Brownie points for me. Thanks
(Hotpoint Aquarius WF541) Very useful video. Easy repair that saved a big repair bill. Make a note of your capacitor orientation re Pos and Neg connections. Video seems at odds with my repair. Photograph/mark all mother board connections before removal. Many thanks
Works perfectly but I used 16v capacitor because 10v one I couldn't find anywhere but it's works and thanks to you it's really helped this video 👍
Great video. Repaired our Hotpoint and saved a fortune.
Iam Glad we could help you
Please remember to subscribe to our channel
th-cam.com/users/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
very useful repair tips. Highly professional. Strongly recommend to see.
Great video Paul, thanks. Love the typo ‘Diagonse’ - very GOT!
Thanks for the video, you have made the steps very clear. I followed your instructions until I removed the control board. I realised the (green) board is fused with its (white) base. I cannot seperate the board (your video at 2:33) The manufacturer probably does not want anyone to repair these boards - what should I do?
Thanks for the video, you have made the steps very clear. I followed your instructions until I removed the control board. I realized
the (green) board is fused with its (white) base. I cannot separate the board, the manufacturer probably does not want anyone to repair these boards - what should I do?
Iam Glad we could help you. If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel
th-cam.com/users/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
TH-cam. th-cam.com/users/Apart4u
Facebook. facebook.com/how.to.repair.appliances
I am unable to fix the board as directed because the circuits are submerged in a resin
We need to report to trading standards why if you bought a new PCB for a particular washing machine that it then requires to be programmed by an engineer, all such items should be supplied preprogrammed, this is a rip off things, manufacturers who use such technology we should stop buying their products, because they want to monopolise everything and charge arm and leg. Expose all such manufacturers so that consumers are protected against these ugly breed of con merchants.
This video is excellent and breaks up the monopoly of rip off merchants and engineers.
i totaly agree but its all about money.
Iam Glad we could help you. If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel
th-cam.com/users/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
TH-cam. th-cam.com/users/Apart4u
Facebook. facebook.com/how.to.repair.appliances
Are you sure you are putting the capacitor in the right way around? Just next to the outline is a + symbol (on all the electrolytic cap outlines, in fact). I suspect the white ring actually denotes the white stripe (-ve pin) on the capacitor. Maybe with is why they blow so often! - just saying.
Thank you. The repair cost me 21 kr. DK = 2.5 £ . saved ny machine 5000 kr. dk = 600 £ . super . only 15 min repair .
Can you do us a favour and please share this video on your timeline.
This will help other people who can’t get engineers out to help them.
th-cam.com/video/rFyGAHVFUW8/w-d-xo.html&t
Stay safe
Great video, a bit of a fiddle to get the circuit board box out of the machine (our Hotpoint aquarius washer/dryer has the motor in a more intrusive place than on thevideo), otherwise straightforward, and we now have a working machine again. Many thanks!
Cheers fella brought cap of ebay for a couple of quid just fitted it works 100%
Iam Glad we could help you. If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel
th-cam.com/users/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
TH-cam. th-cam.com/users/Apart4u
Facebook. facebook.com/how.to.repair.appliances
IS that correct at 4.23,,,,,he said positive to white dot ? on the right .... but on the board you can see positive is on the left ? the long arm on the cap is pos +
Excellent vid, sorted my machine for a few quid. Many thanks!!
+John Cousins I am glad I could help you with this problem.
Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going.
TH-cam. th-cam.com/users/Apart4u
Facebook. facebook.com/pages/How-to-Video-Tutorials-on-Domestic-Appliances/129280853751256
Google plus.
plus.google.com/+How-2-repair/posts
if we helped you can always buy us a beer how-2-repair.com/buy-paul-a-beer/
Thank you for this video. It's brilliant. I could do all of this myself except for not knowing how to solder. I wish I knew someone...
Thank you, Excellent vid, sorted my machine, hope to get some more years out of it.Nice one!!!!
+peter brown I am glad I could help you with this problem.Please remember to Shop with www.how-to-repair.com and it would help us by posting the
video or website on your social media timeline & remember to mark us to
your favourites. This helps us a lot and if we really helped you can always buy
us a beer how-to-repair.com/help/buy-paul-a-beer/TH-cam. th-cam.com/users/Apart4uFacebook.
facebook.com/how.to.repair.appliances
thanks so much for uploading. my Ariston has exactly the same problem now been fixed by following your video.
glad we could help www.how-to-repair.com/buy-paul-a-beer
at 4:33 you said it wrong. the white dot is the negative and the positive has the plus sign on the board. you also inserted it wrong. did it work like that?
Thank you verry much. I followed the steps and I fixed my washing machine. Appreciated!!
Iam Glad we could help you. If you ever need help please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
If have a question please use our site for 24 hour response www.how-to-repair.com/help/contact-us/
Please remember to subscribe to our channel
th-cam.com/users/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
TH-cam. th-cam.com/users/Apart4u
Facebook. facebook.com/how.to.repair.appliances
Thanks a lot great video it worked a treat cost my 2 pound to fix and bout 10 minutes to do thanks to your great video
Hi I have the same machine as in video and I am working on it right now fingers crossed everything will well thanks you
Great video! Currently working on my Ariston Washer Dryer. It has an Indesit S.p.A IDD0211.7 marked module with looks like 2 blown transistors. Would you know where to check the schematicc diagrams so I can find specific transistor replacements?
the little circular symbol is the negative polarity as you can see clearly the positive is marked +
it is nice explaining.and very usefull things for the people. how ever i have problem with my ignis lop60 machine. its all lights onbut not working.please give me reply .good luck
Thanks I have the flashing lights I’ve cleaned the filter ,still the same, so I have to inspect the drainage pipe for blockage, if that’s ok I’ll try to get the board out. And check out your site
Can you do us a favour and please share this video on your timeline.
This will help other people who can’t get engineers out to help them.
th-cam.com/video/rFyGAHVFUW8/w-d-xo.html&t
Stay safe
Thank you for this! Brilliant!
Glad you enjoyed it!
Good video, just a small point; capacators are actually measured in microfarad not microfaran, after Micheal Faraday who was a pioneer in the electrical world.
This smart card port for processing the board to the wash cycle... 0:48 does this mean if I bought a second hand module (which works) even if i swapped it over I could not get the washing machine to work because I have no smartcard reader or knowledge? Or is it ok as long as you get the same control module from the very same model machine?
Working my Indesit WIDL106. All lights blinking as in the video. However, all capacitors are flat and good.They hold a charge - tested them with a multimeter.
Where should I look next?
Just taken my hotpoint bhwd129 apart to try this. It seems like hotpoint have deliberately made it 10 times harder to get to this the stage of getting the board out. The board is totally different with different capacitors. Non are obviously expanded so I’m lost what to do next. I’ll have to take the board somewhere to get checked as he suggested in the video I guess.
Anyone that’s got the same model as me, I’d be hesitant to try this unless a new updated video is uploaded. Wishing I’d called a local independent repair guy now to be honest.
keep it up, please I have a problem, the motor is ok , but is not turning and display F1 . tanx
Thank you. The repair cost me 79p with a capacitor from Maplin.
Maplin is no longer in business, you can try many other outlets one such being Rapid Electronics, Farnell Electronics, R S Components etc etc and may be you can also get a similar size cap 680uf 10v you can use any higher voltage like 1000uf 16v or even 25 volts cap. when fitting observe the white vertical mark it should face the small square chip with about 6 legs, it is an optocoupler, so this cap should go right way around, wrong way it can blow up like again and ruined
Great repair video and clear instructions. Just ready to do mine as above and found the top is bulbous and not flat but no break through however the one next to it the C20 470uf capacitor is the same with what appears very small light brown insulation coming through the centre of the cross. Will change this one too. Is this common for both to be blown?..Many thanks. Nigel
+Nigel Bottomley I am glad I could help you with this problem.
Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going.
TH-cam. th-cam.com/users/Apart4u
Facebook. facebook.com/pages/How-to-Video-Tutorials-on-Domestic-Appliances/129280853751256
Google plus.
plus.google.com/+How-2-repair/posts
if we helped you can always buy us a beer how-2-repair.com/buy-paul-a-beer/
My ancient Hotpoint Aquarius WT540 has a flashing light when you press in the ON button. The light above the ON button is the one that is flashing. Any suggestions as to the problem or fault? Many thanks for any help.
Hi there, just been picky, it isn't uF it is μF, which stands for microFarad
Hi great videos and have helped in the past with previous problems but, and it's only a question, in this video you say that the capacitor that you are changing goes with the negative going to the left and the positive goes where the little white dot is. Is this unique to this washing machines PCB as the board itself would normally have the capacitor going in the opposite way ?? Cheers for the advice...
+Rich Howcroft I am glad I could help you with this problem.
Please remember to mark us to your favourites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going.
TH-cam. th-cam.com/users/Apart4u
Facebook. facebook.com/pages/How-to-Video-Tutorials-on-Domestic-Appliances/129280853751256
Google plus.
plus.google.com/+How-2-repair/posts
if we helped you can always buy us a beer how-2-repair.com/buy-paul-a-beer/
Oh man I'm pleased with myself. I've never soldered anything in my life but I took out the circuit board and sure enough the 680 mf capacitor was bulging like a bulgy thing. I got one off Ebay for the princely sum of £1.45 and my lodger had a soldering iron but I put it off for weeks in case I messed up. Anyway after some faffing I got the old cap out and soldered the new one in. Put everything back in the machine and we have lift off. Normal lights again and I just ran the first load of washing through it. Perfick :)
I get these lights flashing in mine , but mine if I leave flashing goes off after 3 or 4 mins and I am able to use so is this the same problem??? Any help would would be gratefull
hello i change de part that you explain but now the machine dont work, i plug in and any lights starts?
Hi guys. Good to see videos like this. However, on this occasion, I changed the (domed) capacitor as described, (-) correct on the white circle side, but flashing lights continued their dance as before. Any ideas?
Followed your instructions to the letter and worked a treat. I can't click on the beer thing because it brings up the quality menu? What's the direct link so I can stand you a beer?
Hi Donald glad we helped you. saves buying a new machine. here is the link www.how-to-repair.com/buy-paul-a-beer
Donald John rdtuvlb c
Donaldsonc Donald Donald John
how-2-repair.com
Hello sir thank you so much for help, I'm having the problem with Ariston Washing machine flashing only the ON/OFF button , and but it's working but it seams there is something wrong , like something wrong with the program, speed and timing of everything can you help me?
Thank you Paul. Bought you a beer.
hi
Hotpoint Aqualtis AQ113L297E this machine was dispalyed F5 fault , i cleaned the water pump and check if it working through the electric connection, it is revolving. now it is showing F11 fault. what could be wrong? and what is the cost of the module if faulty please.
Hi, my hotpoint dryer starts up and then after a few minutes all of the lights start flashing. There doesn’t seem to be any heat either. Do you think this is a capacitor problem or could it be the heating element? Any help you could offer would be amazing
Thanks for the video
You glossed over how to short the capacitor - please could you explain how to do this? I'm worried about touching a capacitor as I know they can be dangerous.
Hi...
My have same this machine and i replaced this capacitor 860mf by 10 volt d.c ....
But let now the lamps are flashing... place what Ido?
Best regards.
I am trying to remove the circuit board but the wires seem to to short for me to pull it out any ideas as don't want to disconnect wires without photoing
We brought our Hotpoint machine home from the UK to NZ. We have the flashing light situation and the few repair men we have in our town aren't interested in coming to repair the machine because the brand isn't sold here. I have worked through the TH-cam video, took out the control panel and took it to a computer tech company. They tested all the capacitors and reckon they are all fine. I have put it back together and depressingly still have all the lights flashing. Any other suggestions?
Thanks for the video show , from an older elektronic worker VU - AMSTELVEEN The Netherlands .....
Maybe you can make an offer to Bosch Netherlands to review this kind of repairs .....
Hello, i lives in amsterdam as well. Chould you tell me where do you buy the capacitors in netherlands?
yunjia huang i have no idea i would try ebay
Hi Great video, it seems i get this error when the machine starts to drain, i can turn it off and on and it resets but the same thing happens, is this the same issue as the video or something else.
great video. I just fixed my machine and it's working fine. However, I just realised I used a 25w capacitor instead of a 10w capacitor. would this cause an issue long term?
i would not put a great value in myself. I am glad I could help you with this problem.
Please remember to subscribe to our channel
th-cam.com/users/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
TH-cam. th-cam.com/users/Apart4u
Facebook. facebook.com/how.to.repair.appliances
so i assume is error code no.5 (1+4). is it dangerous ? should i continue use the maschine? what is exacly the problem is? thank you very much!!!
Do you still sell the capacitor for the model in this video? I have the same issue but don't know where to get it.
If you can help ...my machine indesit...power comes on after about 10 mins , then all lights flash ? Not the drain !
Perfekt!!! works also with Indesit WIE 107. Thanks a lot :-)
Iam Glad we could help you
Please remember to subscribe to our channel
th-cam.com/users/Apart4u
Remember to Shop with www.how-to-repair.com and it would help us by posting the video or
website on your timeline. This helps us a lot and if we really helped you can
always buy us a beer how-to-repair.com/help/buy-paul-a-beer/
Please remember to mark us to your favourites also I would be grateful if you would
subscribe to our channels social media as this really helps my site and keeps
us going.
TH-cam. th-cam.com/users/Apart4u
Facebook. facebook.com/how.to.repair.appliances
Привет, у нас есть проблемы с Ariston Hotpoint-модель Ariston ARXL 88. Всегда в конце каждой программы машина показать все мигающие огни. В нашем случае машина вращается очень медленно, даже когда мы ставим максимум спина. Программы всегда прерывается, когда пришло время, чтобы вращаться. Кроме того, когда мы закрываем дверь машины не всегда блокировать дверь. Мы должны нажать кнопку "Пуск" много раз, прежде чем дверные замки и начинает цикл. Какие проблемы это может быть? Это двигатель или другой частью проблемы?
good video I've got a hoover tumble dryer all lights flashing. Would you say its most likely a pcb fault then?
Excellent Video! Many Thanks
Where can I purchase the capacitor mentioned in the video
You should use a higher voltage rating of capacitor, 10V isn't enough
hello , i program my wash machine at 30 min and it never finish or it take over 1.30 hour to finish,i try different program and the same think happent all the time.
hello.what does it mean if enhance light and on/off switch keeps flashing? It would be really helpful if you could guide me on it. Thank you
What if you changed thst capacitor and checked the cables and connections and checked the filter isn't blocked. What else could it be
I need to know much more information about the fault sorry
I m watching in 2021, is there any help for me?my indesit WIXL 105 washing machine same problem.
Would it be a problem if I purchased a 25W instead of 10W? Thanks
My washer its an Indesit XWA9 1683 is half full of water and washing and the lights at the side keep flashing. Ive tried putting it on other programs ..like spin/drain...or a small load and it wont empty. I dont want to try and open the door because of the amount of water in the machine....What can I do????
Hi, I've got a Hotpoint WT540.
My washing machine stopped just mid cycle.
It won't do anything.
I've tried to wash, spin, pump out, nothing.
I have a flashing on/off switch and wash enhance.
Any ideas?
hi there, is it the same repair on the WT960 AND WF860, I am having some issues with the boards on these 2 models.
Great video as usual!
Thank you for the complement
Please remember to mark us to your favorites also I would be grateful if you would subscribe to our channels social media as this really helps my site and keeps us going.
TH-cam. th-cam.com/users/Apart4u
Facebook. facebook.com/pages/How-to-Video-Tutorials-on-Domestic-Appliances/129280853751256
Google plus.
plus.google.com/+How-2-repair/posts