When it comes to the wing you purchased, I'm confident that it didn't have a clear coat on it. The shine you observed is likely a result of the epoxy used in the wet lay process, rather than an actual clear coat. In my experience, when I obtain carbon fiber parts from a company, I always engage in a wet sanding process using 600 grit sandpaper. Following this, I meticulously apply automotive clear coat to ensure a flawless and durable finish. This approach has consistently proven effective in addressing the lack of clear coat and enhancing the overall quality of the carbon fiber parts.
wow this is incredible! I have a carbon fiber skateboard that I gauged with a scraping tool trying to get sticky silicone stuff that the last owner sprayed on it, will this method work for repairing the gauges and nicks in the gloss coating? What products did you use for $10?
Hi, bought it from Grainger, outdoor "heavy duty" clear coat. Make sure you give it a good sanding with different grits. Higher the grit the finer it gets.
![[MV] A leap of faith...ความเชื่อใจครั้งสุดท้าย (From "Petrichor the series")](http://i.ytimg.com/vi/U1piZH2CNXA/mqdefault.jpg)
When it comes to the wing you purchased, I'm confident that it didn't have a clear coat on it. The shine you observed is likely a result of the epoxy used in the wet lay process, rather than an actual clear coat. In my experience, when I obtain carbon fiber parts from a company, I always engage in a wet sanding process using 600 grit sandpaper. Following this, I meticulously apply automotive clear coat to ensure a flawless and durable finish. This approach has consistently proven effective in addressing the lack of clear coat and enhancing the overall quality of the carbon fiber parts.
Nicely done!
U didn’t even show what paint to use or type of clear coat
Use 2k clear coat on Carbon!
Thank you I appreciate for this !!!
I also did 400grit and 1000 grit after
wow this is incredible! I have a carbon fiber skateboard that I gauged with a scraping tool trying to get sticky silicone stuff that the last owner sprayed on it, will this method work for repairing the gauges and nicks in the gloss coating? What products did you use for $10?
Hi, bought it from Grainger, outdoor "heavy duty" clear coat. Make sure you give it a good sanding with different grits. Higher the grit the finer it gets.
I’d say use a glass cleaner instead of brake clean but otherwise dope job man
Will do, thank you!
It looks great 👍
Ty, still holding up as well.
@@car-lo You motivated me to fix the CF on my personal car. Thank you for sharing!
What paint did you use. Great job.
What did use??? Please right details I’m trying get my Evo wing carbon fiber restored. Thank you
Hi Edwin, I got the clear coat from granger high heat outdoor clear coat. Thanks for watching
Did you end up repairing your evo's wing? My evo 8's clear coat is mostly all peeled off
Yes, still holding up make sure find a good clear
Coat for high heat (sun resistant it helps)
Hi Is it clear coat or black you are painting with? Lovel job well done. Thanks
Hi, it is clear coat that was applied.
What did you use for spray? And grit for the sand paper?
How many coats did you do for the clear coat
Hi Jason, I think I did three coats? Make sure you cure it then resand for shine buff . Ty-
@@car-lowhat grit do I Re sand with ?
@jasonreyes-wx3lp I think as far as I remembered it was 2k grit really fine... and I buffed it till today still ok.
@@car-lo thanks
Sorry, it was wet sand as well.
Why didn’t you wet sand first?
For the new clear coat to grab on to the surface.
what grit did you use
Jtizzle Jtiz used 400-800-1200 grit...
@@car-lo 500 and 1000
Maybe not sand it without mask😮 that stuff is pretty dangerous for you lungs/health, (better option wet sand it)
Will do ty-