I just did this to my 2004 Kia Sedona. It totally worked. You can use a small paperclip as a jumper pin. Bend the paperclip into a horseshoe shape. Crimp each end of the of the clip (bending each end over) so they each make a small U. This will ensure better contact with pins 5 and 17. Follow the instructions in this video from there. I saved my myself $100 doing it this way. No dealership required. :)
Awesome! Glad you got yours to work. Please like the video and share it. If you ever need anymore key fob #hacks please visit blog.keylessentryremotefob.com
Hey drummer468 and keyless entry remote team...I just used your instructions to program the keyless entry on the 2004 Kia Sedona that I just purchased for my wife. However, my need was a little different. I needed a second fob for me. After the new fob was programmed and tested successfully, the original one stopped working. I did the instructions and reprogrammed the old one and the new one stopped working. Could you provide your eager listeners with instructions on how to program a second fob? This would be much appreciated!!
Answering my old question here. 1. Go to website listed. 2. Read instructions there. I realized that if you click one time for each fob (programmed one going first), you now have two fobs programmed! Thanks again for saving me some $ as well!!
Thanks for your reply. I figured as much. I have had remote failure since the car was new. It probably should have been covered under warranty or recall. Had the receiver changed a year or so ago. Remote would last 6 mos to a year before failure. Failed a little more than a year after receiver change although one of the remotes fail much sooner than other but was waiting for both to fail before reprogramming. Last failure was two weeks after. One still works. I usually take it to the dealer who hasn't been charging me lately.
Hi, below are directions for the 2004 Sonata. Hyundai Sonata 2004 Key Fob Obtain all remote transmitters for this vehicle. 1. Remove center fascia (the plate surrounding the radio) and locate the alarm system control module. Ensure that the memory switch is in the OFF position. 2. Insert key into the ignition and turn ignition to the ON position. 3. After 5 seconds slide the switch on the alarm system control module to the SET position. 4. Press the LOCK button on the first remote to be programmed. 5. If programming a second remote press the LOCK button on the second remote. 6. Slide the switch on the alarm system control module to the OFF position. 7. Turn the ignition OFF and remove key. Replace center fascia. 8. Programming is now complete, test remotes to ensure proper programming.
I'm not clear on what you are trying to ask. Here are the directions that you need to follow, you don't need to do anything else. 1. Use a jumper wire and connect between terminals 5 and 17 of the 20 pin diagnostic connector, located in the engine compartment close to the battery. 2. Switch ignition ON. 3. PRESS the LOCK button on the first remote transmitter to be programmed 2 times. 4. Switch ignition OFF and REMOVE key. 5. REMOVE jumper wire. 6. Check all remote transmitters for correct operation.
@@lamremotxehoivungtautainha5442 For the 2008 you have to take it to a automotive locksmith or dealer to have it programmed, you cannot do it yourself.
You can check our website. Select the model and year you have, select the key fob you have. Scroll down on the page and under the programming section it will either say professional programming needed or it will list directions on how to program the remote yourself. www.keylessentryremotefob.com/shop-by-car-make/kia/
unfortunately this is not the same procedure for a 2006 Sedona. There is no way to self program that one, you will need to find a professional. We have compiled a list of automotive key professionals on our website at: www.keylessentryremotefob.com/Find-A-Locksmith-s/10338.htm
Thanks for the video. I have a 2011 Sedona LX (Canadian) and understand that it needs to be programmed at a dealership or locksmith, however, my dealer claims that they cannot perform a reprogram on a used key fob. This sounds suspect. My van does not have command start, just keyless entry. Do you know if a used key fob, from eBay for example, can in fact be reprogrammed?
You should be able to order a remote online. You have to be careful though because you can't just buy a used one, well you can, but the used remote needs to have been "reset" to program. We do sell replacement remotes for vehicles and guarantee compatibility. I would try a locksmith before the dealer to see if you can get them to program it, they are usually more affordable. Here is a link to our Kia Sedona key fobs you can purchase: bit.ly/2JZOgga
Hi, I'm, not sure if i do, understand you well on the video, i bougth a use 2002 kia sedona ex van, does this van have a key remote?? i really appreciate if able to answer my question you may know it about this type of vehicule?? there is some light showing on the dushboard, which no way to turn them off, i believe have to do with a key remote if it does have one originally, which I bougth it with out. any answer will be helpfull, thanks.
+Gaspar Pascual If you need to see if your vehicle came equipped with keyless entry call your local dealership, ask for the service department, and ask them if your vehicle came with keyless entry. Make sure to have your vin# handy they will ask for that.
Yeah I was doing this on my mom's car and accidentally got the wront pins and created a short. Thankfully everything is okay. She would have been pissed at me lol
These instructions did not work for me. I have a 2005 Kia Sedona EX. Just bought OEM keyless remote (with remote ignition start). Maybe there is a difference in programming between LX vs EX Sedonas?
I know this video was from 2015, but I have a question does this same procedure work for a 2012 Kia Soul. I replaced the Remotes shell(FOB) and exchanged board and key. The replacement shells I bought are junk and when trying to start car with flip key it fell apart and somehow the buttons toggled and now the remotes will not work. As many times as I rechecked it to make sure I put them back together correctly they will not click the Doors I get nothing. I see that when I press the lock or unlock the LED does flash. Any info will help.
I will let our video team know you are looking for a video for this. In the meantime here are the instructions on how to program the home link garage door for your #Kia #Sedona Start by pressing the whichever HomeLink button you would like to designate for the garage door while also pressing down on the garage door opener button. As you are doing this the HomeLink light should flash, and then begin to flash rapidly. You can then release both buttons. After this, there will be two ways to proceed. Either you will press the designated HomeLink button for the garage door and the programming will be complete, as indicated by the light remaining solid. Second, if you push the button and the light blinks rapidly for two seconds, you still have a couple more steps to complete.Read More Kia UVO Infotainment System You must then go into your garage and, after finding a ladder, press the “learn” or “smart” button that is located on your garage doors motor. You must then go back into the vehicle and push the designated garage door HomeLink button within thirty seconds. Push the button for two seconds and then release it. Repeat these steps as necessary until the garage door activates.
I have a 2002 Kia Sedona, my question is more for the Key Fob. What kind would I need to get to try this? Do I need something special or will anyone do? Thanks!
unfortunately these procedures will not work with a #Kia #Optima That vehicle needs a professional to program it. We do have a list of recommended professional key fob programmers on our website here: www.keylessentryremotefob.com/Find-A-Locksmith-s/10338.htm
Thanks for this video. I have purchased a remote already for my 03 Kia Sorento,, but my question is how do I get these instructions on configuration you used ?
Unfortunately for a 2003 Kia Sorento you need to go to a professional to have the key fob programmed. I suggest finding a local locksmiths as they can be more affordable than the dealer and they come to you.
@@michaelmalcolm1985 Kia Sedona 2004 Remote This is the layout of jumper pins. 1 2 3 4 56 7 8 9 10 11 12 13 14 15 161718 19 20 ONLY TWO REMOTES CAN BE PROGRAMMED TO THIS VEHICLE. 1. Open Hood and locate diagnostic connector near battery 2. Jump pin 5 to pin 17 with a suitable jumper wire. 3. Turn ignition to the ON position. ( DO NOT START) 4. Press LOCK button of first remote two times. 5. Press LOCK button on second remote two times. (if applicable). 5. Turn ignition OFF and remove key. 6. Disconnect jumper from diagnostic connector. 7. Check for lock and unlock operation. Horn will sound when locking.
Hey man am very late, but thxfor the help am about to try it with the specific instructions I found from the site "it still runs." Was wondering the exact size of the wire but ppl say to use a paper clip. I got a Kia Ronda 07 so lets see if this works cuz dealerships suck!
@@KeyFobsPlus unfortunately it didn't work. Might have to buy jump wires but instead I'm gonna try to return my 2 fobs from amazon n just get a shell case n transfer the chip to it.
unfortunately this will not work with a 2012 Kia Sedona. That car needs a professional to program the key. To find a professional in your area use our locksmith locator tool on our website here: bit.ly/2LjxBU1
Sorry, I am not sure on this one. I would call your local dealer, ask for service, then ask them if your vehicle has self programming instructions for the key fob. Have your vin# handy, they will ask for that. Please let us know what you find out.
@@sueemerson1887 sorry, this vehicle does not signal that it went into programming successfully. I know it's frustrating, but keep at it, these are the correct instructions..actually, do you have any check engine lights on in the vehicle?
@@sueemerson1887 check engine lights can have an affect on programming key fobs. Go to your local autozone or oriellys and have them clear your check engine code and try again.
If your remote looks like the one in the link below you can program it yourself, directions are also on that link. If your remote looks different you will have to take it to a professional to have it programmed. www.keylessentryremotefob.com/kia-sorento-oem-3-button-key-fob/
call you local dealership, ask for the service department, ask them for if your vehicle came equipped with keyless entry. They will ask for your vin# so have that handy
You can try and see if it will work. Not all remoted are the same and normally you have to clear the old information off of the board so it can take the new programming, but if you have a extra remote, its worth a try.
+Walter “Mr. Flores” Flores Unfortunately these will not work with a 2008 kia sedona. The 2008 kia sedona requires a professional to program it, there is no self-programming instructions available.
+Lang Yao unfortunately these do not work with a 2002 spectra, it requires a professional to program that car: blog.keylessentryremotefob.com/2013/12/2002-kia-spectra-key-fob-remote.html
Do-It-Yourself programming procedure is not available for a 2004 Kia Spectra. It requires a diagnostic equipment to be connected to the vehicle to program the remote. You will need to find a local automotive locksmith or a dealer to program a 2004 Kia Spectra remote.
My original key fob stopped working, so I put a brand new battery in it. When it still didn't work I tried your trick. It didn't work for my 2004 KIA Sedona 😢
@@KeyFobsPlus ok, thanks. I'm pulling my hair out trying to get this thing to work. Do you know of any way to wipe the fob's memory from the van? I know kia only allows 2 fobs to be programmed to this particular model but there's no way to UN-program one or to wipe the memory from the vehicle in order to pair 2 new fob's. Sorry for my whining 😄
+Aamer Al Naimi unfortunately these instructions will not work on a 2005 kia sportage. A 2005 kia sportage requires a professional to program it, i.e. locksmith, mechanic, or dealer.
+Marin Ernesto unfortunately these instructions do not work with a 2006 sportage, it requires a professional to program it. blog.keylessentryremotefob.com/2013/09/2006-kia-sportage-key-fob-remote.html
These programming instructions are only for the years listed above 2002-2004. For the 2007 model I am showing that it needs to be hooked up to special equipment.
+Gilbert Alvarez Just follow the same steps for a second remote, not the setting up the jumper wires, but just the pushing the buttons on the remote. I hope that makes sense
Sorry that it didn't work. We also have written directions avaible that you can take a look at. Search for you model and it will bring up the programming directions. www.keylessentryremotefob.com/programming-instructions/
+duke927 unfortunately this will not work on a 2004 kia optima. There are not self-programming procedures for a 2004 kia optima, you will need to have a professional do this. I would try a locksmith, if you need help finding a locksmith in your area, use our preferred locksmith locator on our blog: blog.keylessentryremotefob.com/p/there-is-no-onboard-programming.html
+duke927 unfortunately there are not self-programming instructions for a 2006 kia sedona. It requires a professional to program. I would try a locksmith or auto mechanic before the dealer, they are usually about 50% less expensive.
+Lisa Rasnake unfortunately there are not self-programming instructions for a 2006 kia sedona. It requires a professional to program. I would try a locksmith or auto mechanic before the dealer, they are usually about 50% less expensive.
Do-It-Yourself programming procedure is not available for a 05 kia sportage. This vehicle requires a diagnostic equipment to be connected to the vehicle to program the remote. You will need to find a local automotive locksmith or a dealer to program this remote.
the instructions in this video are only for 2002-2005. A 2007 needs special equipment to program, you will need to go to the dealer or locksmith to get it programmed
Is it possible to tell me what all parts are involved. Obviously there is a fob and a receiver but, i went to the yard and picked up one off another 05 and did your prog sequence and still nothing
I'm trying to do the same thing with my 2004 Kia Sorento, and it's not working. Kia forums and TH-cam tutorials are telling me that I have to bridge terminal 6 to the POS battery post instead to the mentioned procedure in your video, but it's not working for me. Am I doing something wrong? Thanks in advance.
Yes, I have the original remote the came with the vehicle. It worked before, and that was YEARS back. Now that the vehicle got passed down to me, the remote doesn't function at all. I think there may be something else wrong, it's weird.
Charles Almero Hello Mr. Almero. I own the same vehicle handed down to me with the same issue. I replaced the battery first and nothing worked. Did you manage to resolve your keyless remote issue jumping certain pins? I'm not a wizard when it comes to working electrically under the hood. Any suggestions would be greatly appreciated. Thank you. Pschonback1@gmail.com. Pschonback1@aol.com.
Unfortunately, I haven't resolved this issue. I gave up =( Hopefully you found a solution. In the numerous forums and video tutorials I've found, the procedure in this video applies to the 2004 Kia Sorento. But instead of bridging or "jumping" pins 5 & 17, you want to do it for pins 5 & 6 for the 04 Sorento. I've tried this method, and it hasn't worked for me. Maybe I'm doing it wrong, or maybe there's some other issue. Check this video out: th-cam.com/video/ihujrLGemYw/w-d-xo.html If it worked for you, please let me know! I apologize fore the late response btw.
How do I find Jump #5 and #17. It has 8 pins on 1st row and other 8 on 2nd row and then some. #1 start from left top? 12345678, 9,10,11,12,13,14,15,16 then 3rd row 1st pin is #17? Some part I couldn't hear what you said. can you write the steps in writing? Thank you for info.
I tried this and it doesn't work! I hear a relay click but NOTHING. My advice is to make sure that your vehicle has been programmed already for keyless.
Hello. My name is cody. I ha e a few questions. I have a 2005 kia Sedona lx. I am the second owner and have all paper work (window stickers and manuals). My van was not equipped with keyless entry. I called kia and confirmed it. And asked what I need to do to add FACTORY keyless entry and the said it's not possible because it doesn't have the harness for the module. And that was a lie because I found the harness behind clove compartment and I purchased a remote and module separate on ebay and installed it. And tried multiple different programming instructions I found online using the diagnostic port under hood. What I am asking is. I have an 05. And want to add FACTORY keyless entry. The wiring is there. I did the same cheap with my fog lights. Didn't come with them but bought them and the button and it was plug and play. What am I doing wrong? Does the key fob have module have to match or something. Please help....
+abdumka Unfortunately the 2003 hyudai elantra requires a professional to program the key fob to the vehicle. We suggest a locksmith, they are usually 50% the cost of the dealer to program. You can find a locksmith in your area by using our preferred locksmith locator here: blog.keylessentryremotefob.com/p/there-is-no-onboard-programming.html
+Duli Serrano unfortunately there are no self programming instructions for a 2007 hyundai entourage, if you need to find a professional in your area visit: blog.keylessentryremotefob.com/2013/05/2007-hyundai-entourage-key-fob-remote.html
+Duli Serrano unfortunately the 2007 entourage is not self programmable, you need to go to a professional to program that remote: blog.keylessentryremotefob.com/search?cx=partner-pub-9359873407684367%3A7506621223&ie=UTF-8&q=2007+entourage&sa=Search
Why can this be done on a 2002 Sedona, but not on a 2008 Sedona? I can't do it on my 2003 Kia Optima either. What information do you use to determine which vehicles can/cannot be be programmed manually? We have both an Autel IM608 and a Maxisys 906TS that can't do it. The IM608 offers a procedure and pictures to use the diagnostic port under the hood (but tells you to use pins 12 and 16, but there isn't a wire/terminal in pin16). The 906TS offers no information at all. How do you guys determine which can/cannot be programmed - other than a dealer?
Hi, you can use the link below to look up year, make and model and it will tell you programming directions if avaible or if you have to take it to a professional to be done. www.keylessentryremotefob.com/programming-instructions/
ONLY TWO REMOTES CAN BE PROGRAMMED TO THIS VEHICLE. 1. Open Hood and locate diagnostic connector near battery 2. Jump pin 5 to pin 17 with a suitable jumper wire. 3. Turn ignition to the ON position. ( DO NOT START) 4. Press LOCK button of first remote two times. 5. Press LOCK button on second remote two times. (if applicable). 5. Turn ignition OFF and remove key. 6. Disconnect jumper from diagnostic connector. 7. Check for lock and unlock operation. Horn will sound when locking.
I gave you a thumb down. Why? Because I was not able to follow you, what you did. Okay, you placed a bridge into the check-connector. 5 to 17. then you ran between cabin and engine lift off the bridge or not (?) and pressed five times the lock and the open? If you wanna make such videos, so take your time. Explain, what you do. Give the camera time to follow what you are doing.
Sorry you where not able to follow the video, here are written directions on how to program the remote. Kia Sedona 2003 Remote This is the layout of jumper pins. 1 2 3 4 56 7 8 9 10 11 12 13 14 15 161718 19 20 ONLY TWO REMOTES CAN BE PROGRAMMED TO THIS VEHICLE. 1. Open Hood and locate diagnostic connector near battery 2. Jump pin 5 to pin 17 with a suitable jumper wire. 3. Turn ignition to the ON position. ( DO NOT START) 4. Press LOCK button of first remote two times. 5. Press LOCK button on second remote two times. (if applicable). 5. Turn ignition OFF and remove key. 6. Disconnect jumper from diagnostic connector. 7. Check for lock and unlock operation. Horn will sound when locking.
![⭐️( ลอยกระทง 2024 ) Ver. แดนซ์ Remix BY [ ดีเจกิต รีมิกซ์ ]](http://i.ytimg.com/vi/rMWOLhgXUHc/mqdefault.jpg)
Get A FREE battery for this key fob at: www.keylessentryremotefob.com/battery-finder/
I just did this to my 2004 Kia Sedona. It totally worked. You can use a small paperclip as a jumper pin. Bend the paperclip into a horseshoe shape. Crimp each end of the of the clip (bending each end over) so they each make a small U. This will ensure better contact with pins 5 and 17. Follow the instructions in this video from there. I saved my myself $100 doing it this way. No dealership required. :)
Awesome! Glad you got yours to work. Please like the video and share it. If you ever need anymore key fob #hacks please visit blog.keylessentryremotefob.com
Hey drummer468 and keyless entry remote team...I just used your instructions to program the keyless entry on the 2004 Kia Sedona that I just purchased for my wife. However, my need was a little different. I needed a second fob for me. After the new fob was programmed and tested successfully, the original one stopped working. I did the instructions and reprogrammed the old one and the new one stopped working. Could you provide your eager listeners with instructions on how to program a second fob? This would be much appreciated!!
Answering my old question here. 1. Go to website listed. 2. Read instructions there. I realized that if you click one time for each fob (programmed one going first), you now have two fobs programmed! Thanks again for saving me some $ as well!!
Thanks for your reply. I figured as much. I have had remote failure since the car was new. It probably should have been covered under warranty or recall. Had the receiver changed a year or so ago. Remote would last 6 mos to a year before failure. Failed a little more than a year after receiver change although one of the remotes fail much sooner than other but was waiting for both to fail before reprogramming. Last failure was two weeks after. One still works. I usually take it to the dealer who hasn't been charging me lately.
Excelente información, me serviría igual en un kia spectra 2007??
No, it will not. You have to go to a professional for the 2007 Spectra, we recommend going to a automotive locksmith.
I have a 2005 Sedona....your video was perfect. Everything should be this easy!!! Thank you!
glad this helped, if you ever need a key fob replacement please think of us www.keylessentryremotefob.com
Donde compraste el remoto
cho hỏi khi làm điều khiển xe rồi mình cấm lộn ngược ngày xe có ảnh hưởng gì không
Hi, I tried translating your comment and it didn't make sense, if you can please respond in English and we will do our best to help.
Brill worked a treat 2004 Sedona
Glad this worked, please like the video if it helped & thanks for watching!
Hello, can I do this technique on my 2004 Hyundai Sonata? Do you know which pin and how many numbers?
Hi, below are directions for the 2004 Sonata.
Hyundai Sonata 2004 Key Fob
Obtain all remote transmitters for this vehicle.
1. Remove center fascia (the plate surrounding the radio) and locate the alarm system control module. Ensure that the memory switch is in the OFF position.
2. Insert key into the ignition and turn ignition to the ON position.
3. After 5 seconds slide the switch on the alarm system control module to the SET position.
4. Press the LOCK button on the first remote to be programmed.
5. If programming a second remote press the LOCK button on the second remote.
6. Slide the switch on the alarm system control module to the OFF position.
7. Turn the ignition OFF and remove key. Replace center fascia.
8. Programming is now complete, test remotes to ensure proper programming.
Excelente información, me serviría igual en un kia spectra 2007?
Can I ask if it's time to turn on and then pull out a day of electricity and then get in the car so I can take the key out when I install the remote?
I'm not clear on what you are trying to ask. Here are the directions that you need to follow, you don't need to do anything else.
1. Use a jumper wire and connect between terminals 5 and 17 of the 20 pin diagnostic connector, located in the engine compartment close to the battery.
2. Switch ignition ON.
3. PRESS the LOCK button on the first remote transmitter to be programmed 2 times.
4. Switch ignition OFF and REMOVE key.
5. REMOVE jumper wire.
6. Check all remote transmitters for correct operation.
please give me the remot code for that car in 2008
@@lamremotxehoivungtautainha5442 For the 2008 you have to take it to a automotive locksmith or dealer to have it programmed, you cannot do it yourself.
pins 12 and 16 worked on my 2004 model. press lock for 2seconds twice on each fob. only 2 fobs can be programmed.
How do you know which Kia vehicles this procedure will work on, and which vehicles will require professional assistance? Thank you.
You can check our website. Select the model and year you have, select the key fob you have. Scroll down on the page and under the programming section it will either say professional programming needed or it will list directions on how to program the remote yourself.
www.keylessentryremotefob.com/shop-by-car-make/kia/
I have a 2012 kia sedona can i use the same method to program my remote key?
No, you cannot. The 2012 has to be taken to a professional to program. We recommend going to a automotive locksmith.
Good video. Will this work on kia carnival (EU model) 2005?
We don't work with EU models, so I'm not sure. Sorry we couldn't be of more help.
Would love to see an install for a Kia Rio 2013 remote start and keyless entry..
Thanks.
HI will this work on a 2014 Kia Sedona EX ?
No, the 2014 has to be programmed by a professional. We recommend going to a automotive locksmith.
What pins would it be for a 2005 kia spectra 5 ??
Unfortunately a 2005 #Kia Spectra requires a professional to program.
It worked on a random one I ordered on ebay.
Sweet! If this video helped please like it and share.
I have a Sedona 2006 , is it the same procedure that I need to follow for programming the key fob
unfortunately this is not the same procedure for a 2006 Sedona. There is no way to self program that one, you will need to find a professional. We have compiled a list of automotive key professionals on our website at: www.keylessentryremotefob.com/Find-A-Locksmith-s/10338.htm
Thanks for the video. I have a 2011 Sedona LX (Canadian) and understand that it needs to be programmed at a dealership or locksmith, however, my dealer claims that they cannot perform a reprogram on a used key fob. This sounds suspect. My van does not have command start, just keyless entry. Do you know if a used key fob, from eBay for example, can in fact be reprogrammed?
You should be able to order a remote online. You have to be careful though because you can't just buy a used one, well you can, but the used remote needs to have been "reset" to program. We do sell replacement remotes for vehicles and guarantee compatibility. I would try a locksmith before the dealer to see if you can get them to program it, they are usually more affordable. Here is a link to our Kia Sedona key fobs you can purchase: bit.ly/2JZOgga
Hi. How do I tell which remote is correct ? Its shows one with the panic button and one with the rear door button ?
If you need help selecting the correct remote before you purchase give us a call at 402-671-5100 and we will make sure you get the right one.
What pins to be jumpered in kia mohave 2008 model series?
In the US its called the Borrego not the Mohave. We do not have information for the 2008 but for the 2009 it has to be programmed by a professional.
Hi, I'm, not sure if i do, understand you well on the video, i bougth a use 2002 kia sedona ex van, does this van have a key remote?? i really appreciate if able to answer my question you may know it about this type of vehicule?? there is some light showing on the dushboard, which no way to turn them off, i believe have to do with a key remote if it does have one originally, which I bougth it with out. any answer will be helpfull, thanks.
+Gaspar Pascual If you need to see if your vehicle came equipped with keyless entry call your local dealership, ask for the service department, and ask them if your vehicle came with keyless entry. Make sure to have your vin# handy they will ask for that.
Where can I get the jumper wire? Or what can I use to make one? Looking forward to use your instructions I have a Kia Sedona lx 2005 will it work
just bend a paperclip, that will serve as a jumper wire
Thank you
@@UncleJSlots Where can I get a single paperclip? ;-)
guys be sure you get the proper pins. a miss by one or two can trash the ECU. they are not cheap
Yeah I was doing this on my mom's car and accidentally got the wront pins and created a short. Thankfully everything is okay. She would have been pissed at me lol
These instructions did not work for me. I have a 2005 Kia Sedona EX. Just bought OEM keyless remote (with remote ignition start). Maybe there is a difference in programming between LX vs EX Sedonas?
Thank you this worked perfect on my 2002 Sedona, thanks for sharing.
Glad we could help! If you haven't already please like and subscribe to our #TH-cam channel for more helpful videos.
Does it work for 2013?
No, it does not. The 2013 has to be taken to a professional to be programmed. We recommend going to a automotive locksmith.
Cho mình hỏi xe kia carnlvAl.2008 cách cài khiển giống vậy ko
The Kia Carnival is not sold in the US, I do not know if this video would work.
@@KeyFobsPlus I can't do the same thing
Will this work for a 2007 Sedona?
No, it will not. The 2007 has to be done by a professional. We recommend going to a automotive locksmith.
@@KeyFobsPlus Thanks.
what about a kia cerato 2006?
pleas advice
unfortunately the kia cerato does not have any self programming instructions
@@KeyFobsPlus thanks
Thank You! exact and all instructions perfect.
Your welcome. If you haven't yet please like the video as it helps our #TH-cam channel out.
Does not work on my 05 Sedona LX.
I know this video was from 2015, but I have a question does this same procedure work for a 2012 Kia Soul. I replaced the Remotes shell(FOB) and exchanged board and key. The replacement shells I bought are junk and when trying to start car with flip key it fell apart and somehow the buttons toggled and now the remotes will not work. As many times as I rechecked it to make sure I put them back together correctly they will not click the Doors I get nothing. I see that when I press the lock or unlock the LED does flash. Any info will help.
😮Unfortunately these programming procedures will not work with a 2012 Kia Soul. That vehicle requires a professional to program it.
Hi can you show us how to program the home link garage door program on a 2003 Kia Sedona?
I will let our video team know you are looking for a video for this. In the meantime here are the instructions on how to program the home link garage door for your #Kia #Sedona Start by pressing the whichever HomeLink button you would like to designate for the garage door while also pressing down on the garage door opener button. As you are doing this the HomeLink light should flash, and then begin to flash rapidly. You can then release both buttons.
After this, there will be two ways to proceed. Either you will press the designated HomeLink button for the garage door and the programming will be complete, as indicated by the light remaining solid. Second, if you push the button and the light blinks rapidly for two seconds, you still have a couple more steps to complete.Read More Kia UVO Infotainment System
You must then go into your garage and, after finding a ladder, press the “learn” or “smart” button that is located on your garage doors motor. You must then go back into the vehicle and push the designated garage door HomeLink button within thirty seconds. Push the button for two seconds and then release it. Repeat these steps as necessary until the garage door activates.
I have a 2002 Kia Sedona, my question is more for the Key Fob. What kind would I need to get to try this? Do I need something special or will anyone do? Thanks!
You need this remote for your 2002 kia sedona: www.keylessentryremotefob.com/PLN-BONTEC-003-KIA-Factory-OEM-KEY-FOB-2-BUTTON-ey-p/pln%20bontec-003.htm
I ordered one similar to the original on ebay for cheap and it worked
Will that works on the Hyundai entourage 2007?
not this does not work with a 2007 hyundai entourage
Did you try? Same as my entourage 2007
I Know this video is a bit old but will this work for a 2004 Kia Optima LX
unfortunately these procedures will not work with a #Kia #Optima That vehicle needs a professional to program it. We do have a list of recommended professional key fob programmers on our website here: www.keylessentryremotefob.com/Find-A-Locksmith-s/10338.htm
Thanks for this video. I have purchased a remote already for my 03 Kia Sorento,, but my question is how do I get these instructions on configuration you used ?
Unfortunately for a 2003 Kia Sorento you need to go to a professional to have the key fob programmed. I suggest finding a local locksmiths as they can be more affordable than the dealer and they come to you.
@@KeyFobsPlus can u send me the directions plz cause I can't hear him or see the pins he probing
@@michaelmalcolm1985 Kia Sedona 2004 Remote
This is the layout of jumper pins.
1 2 3 4
56 7 8 9 10 11 12
13 14 15 161718 19 20
ONLY TWO REMOTES CAN BE PROGRAMMED TO THIS VEHICLE.
1. Open Hood and locate diagnostic connector near battery
2. Jump pin 5 to pin 17 with a suitable jumper wire.
3. Turn ignition to the ON position. ( DO NOT START)
4. Press LOCK button of first remote two times.
5. Press LOCK button on second remote two times. (if applicable).
5. Turn ignition OFF and remove key.
6. Disconnect jumper from diagnostic connector.
7. Check for lock and unlock operation. Horn will sound when locking.
Thanks a bunch for making this video. Thumps up !
👍You're welcome! If you haven't already please like the video and subscribe to our #youtube channel for more #Kia Videos
Hey man am very late, but thxfor the help am about to try it with the specific instructions I found from the site "it still runs." Was wondering the exact size of the wire but ppl say to use a paper clip. I got a Kia Ronda 07 so lets see if this works cuz dealerships suck!
Yes a paper clip will work. Let us know if you get it to work!
@@KeyFobsPlus unfortunately it didn't work. Might have to buy jump wires but instead I'm gonna try to return my 2 fobs from amazon n just get a shell case n transfer the chip to it.
Appreciate the help though!
Does this same procedure work on a 2012 Sedona?
unfortunately this will not work with a 2012 Kia Sedona. That car needs a professional to program the key. To find a professional in your area use our locksmith locator tool on our website here: bit.ly/2LjxBU1
Hi dude, i was wondering if this works on kia Cerato 2005 ? Please suggest.
Thanks in an advance.
Sorry, I am not sure on this one. I would call your local dealer, ask for service, then ask them if your vehicle has self programming instructions for the key fob. Have your vin# handy, they will ask for that. Please let us know what you find out.
+Keyless Entry Remote Inc
Thanks mate
Have 2003 Kia Sedona and have tried this 4 times, no luck. What should I do next? I have a new replacement fob. Sue
Is the vehicle going into programming mode?
@@KeyFobsPlus Well now, I'm not sure? How can you tell?
@@sueemerson1887 sorry, this vehicle does not signal that it went into programming successfully. I know it's frustrating, but keep at it, these are the correct instructions..actually, do you have any check engine lights on in the vehicle?
@@KeyFobsPlus yes actually, the check engine light is on, always happens if I don't tighten gas cap correctly.
@@sueemerson1887 check engine lights can have an affect on programming key fobs. Go to your local autozone or oriellys and have them clear your check engine code and try again.
Please Kia Sorento '03... What Is procedure?
If your remote looks like the one in the link below you can program it yourself, directions are also on that link. If your remote looks different you will have to take it to a professional to have it programmed. www.keylessentryremotefob.com/kia-sorento-oem-3-button-key-fob/
Hey bro thanks it work on my 2005 Kia sedona , thumbs up 👍
Your welcome, so glad this worked. If you haven't already please like the video as it helps our #TH-cam channel out
Idk if my 2005 Kia Sedona lx has the keyless entry. How can I tell?
call you local dealership, ask for the service department, ask them for if your vehicle came equipped with keyless entry. They will ask for your vin# so have that handy
Can I reprogram a remote from another kia to mine?
You can try and see if it will work. Not all remoted are the same and normally you have to clear the old information off of the board so it can take the new programming, but if you have a extra remote, its worth a try.
Is that gonna work with 2008 Kia Sedona too? Pls reply. Thank you for very your great information.
+Walter “Mr. Flores” Flores Unfortunately these will not work with a 2008 kia sedona. The 2008 kia sedona requires a professional to program it, there is no self-programming instructions available.
how will i do to my kia rio 09 model?thanks
Is that gonna work with 2002 Kia Spectra too?
+Lang Yao No these will not work on a 2002 Kia Spectra. The 2002 Kia Spectra requires a professional to program it.
+Lang Yao unfortunately these do not work with a 2002 spectra, it requires a professional to program that car: blog.keylessentryremotefob.com/2013/12/2002-kia-spectra-key-fob-remote.html
Thank you .. works happy happy
Your welcome, glad it helped. If you haven't already please like the video and subscribe to our #TH-cam channel for more videos for your #Kia
What about for a kia spectra 5?
The Spectra5 has to be programmed by a professional. We recommend going to a automotive locksmith.
@@KeyFobsPlus
En un kia spectra 2007 se puede programar así como el video?
@@freddyavelares2983 No, the 2007 Spectra has to be programmed by a professional, we recommend going to a automotive locksmith.
does this work on a 2005 kia sedona
+Gilbert Alvarez yes, this should wok on a 2005 also
+Gilbert Alvarez YES
Bro this will work on my 2009 sedona or not ?If not can you tell me how to program it plz if you know . Thanks
unfortunately it will not work on your 2009 sedona, that vehicle requires a professional to program it.
What about an 04 Kia spectra?
Do-It-Yourself programming procedure is not available for a 2004 Kia Spectra. It requires a diagnostic equipment to be connected to the vehicle to program the remote. You will need to find a local automotive locksmith or a dealer to program a 2004 Kia Spectra remote.
What is the lock button that you press twice
the lock button on the remote
Hey how would I do a 2005 Kia Optima? Thank you
unfortunately there are no self programming procedures for a 2005 kia optima, it must be programmed by a professional
Sorry I mean a 2004
Same thing for a 2004 kia optima, that remote must be programmed by a professional
All Optimas? Is this possible for a 2007 Optima? Thanks
My original key fob stopped working, so I put a brand new battery in it. When it still didn't work I tried your trick. It didn't work for my 2004 KIA Sedona 😢
If your key fob worked before, try these tips to get it working: www.keylessentryremotefob.com/how-to-fix-a-key-fob/
@@KeyFobsPlus ok, thanks. I'm pulling my hair out trying to get this thing to work. Do you know of any way to wipe the fob's memory from the van? I know kia only allows 2 fobs to be programmed to this particular model but there's no way to UN-program one or to wipe the memory from the vehicle in order to pair 2 new fob's. Sorry for my whining 😄
@@KeyFobsPlus Thank you for replying, by the way. Super nice of you to provide a link, too!
Hi Man how are you? I have 2005 Kia Sportage I can programme my new remote please response ASAP
THANKS
+Aamer Al Naimi unfortunately these instructions will not work on a 2005 kia sportage. A 2005 kia sportage requires a professional to program it, i.e. locksmith, mechanic, or dealer.
+Keyless Entry Remote Inc Thanks for information have a good day bye bye✋
Is the same for a Kia Sportage 2006?
Marin Ernesto Unfortunately a 2006 Kia Sportage can only be programmed by a professional, i.e locksmith, mechanic, or dealer.
+Marin Ernesto unfortunately these instructions do not work with a 2006 sportage, it requires a professional to program it. blog.keylessentryremotefob.com/2013/09/2006-kia-sportage-key-fob-remote.html
Hi, my car when I give something from the remote key does not receive a prompt to type Kia Sedona 2007 Is there a solution?
This does not work with a 2007 Kia Sedona, you will need a professional to program it
OK friend, if 2005 has it program on board or not? and how to program it?
this video shows you how to program the remote for a 2005 sedona
All right friend, but do you know, how to program a remote for kia morning 2005? please help me, thank you.
Keyless Entry Remote Inc
Is it going to be the same for 2007 model?
These programming instructions are only for the years listed above 2002-2004. For the 2007 model I am showing that it needs to be hooked up to special equipment.
Thanks.
how would I set up a second remote to same car,same type remote.
+Gilbert Alvarez Just follow the same steps for a second remote, not the setting up the jumper wires, but just the pushing the buttons on the remote. I hope that makes sense
+Gilbert Alvarez press the buttons on the second remote after you press the buttons on the first remote.
I did this results car does not start anymore and the immo light does not light up someone has a solution
Timing is very important, please make sure you are completing the steps as quickly as you can.
Definitely followed instructions, watched video 100 times, didn't work lol. Thanks anyway
Sorry that it didn't work. We also have written directions avaible that you can take a look at. Search for you model and it will bring up the programming directions. www.keylessentryremotefob.com/programming-instructions/
How can I do this for a 2008?
The 2008 has to be programmed by a professional, you are not able to do it yourself. We recommend going to a automotive locksmith.
Hi. Great video will this work with a KIA Optima 2004?
+duke927 unfortunately this will not work on a 2004 kia optima. There are not self-programming procedures for a 2004 kia optima, you will need to have a professional do this. I would try a locksmith, if you need help finding a locksmith in your area, use our preferred locksmith locator on our blog: blog.keylessentryremotefob.com/p/there-is-no-onboard-programming.html
+duke927 unfortunately there are not self-programming instructions for a 2006 kia sedona. It requires a professional to program. I would try a locksmith or auto mechanic before the dealer, they are usually about 50% less expensive.
Keyless Entry Remote Inc I have a 2004 sorento and I tried the same thing. I can't get it to work either!
does this work on a 2006 kia Sonora ex mini van
+Lisa Rasnake I do not know what a kia sonora is?
Sorry Sedona ex 2006mini van
+Lisa Rasnake unfortunately there are not self-programming instructions for a 2006 kia sedona. It requires a professional to program. I would try a locksmith or auto mechanic before the dealer, they are usually about 50% less expensive.
Can I program the key fob for an 05 Kia Sportage?
Do-It-Yourself programming procedure is not available for a 05 kia sportage. This vehicle requires a diagnostic equipment to be connected to the vehicle to program the remote. You will need to find a local automotive locksmith or a dealer to program this remote.
Well I'm gonna do it anyway. I've already started to take the tires off.
a help as I do the programming for kia sedona 2007
not sure if i understand the comment, do you have a question?
Keyless Entry Remote Inc I have a 2007 Kia Sedona but does not have pin 17 as I set up the remote control?
the instructions in this video are only for 2002-2005. A 2007 needs special equipment to program, you will need to go to the dealer or locksmith to get it programmed
Is it possible to tell me what all parts are involved.
Obviously there is a fob and a receiver but, i went to the yard and picked up one off another 05 and did your prog sequence and still nothing
Did the vehicle you are trying to program the key fob to have a working key fob before? Are you sure it is equipped with the keyless entry option?
@@KeyFobsPlus yes. I just don't know if that fob was the actual one that fit it.
@@red2965 what is the part number or fcc id number on the back of the fob you are trying to program?
@@KeyFobsPlus sorry it is wore off.
Can it be found inside?
@@red2965 unfortunately there is not. The key fob you need is this one: www.keylessentryremotefob.com/product-p/oem-t009-3b-kia-sedona.htm
Thank you so much. God bless you.
+beatriz mansilla Your welcome, glad you found this helpful, please share our channel with your friends and family
I'm trying to do the same thing with my 2004 Kia Sorento, and it's not working. Kia forums and TH-cam tutorials are telling me that I have to bridge terminal 6 to the POS battery post instead to the mentioned procedure in your video, but it's not working for me.
Am I doing something wrong?
Thanks in advance.
I don't think you are doing anything wrong. Are you sure you have the keyless entry option on your vehicle?
Yes, I have the original remote the came with the vehicle. It worked before, and that was YEARS back. Now that the vehicle got passed down to me, the remote doesn't function at all. I think there may be something else wrong, it's weird.
Charles Almero Hello Mr. Almero. I own the same vehicle handed down to me with the same issue. I replaced the battery first and nothing worked. Did you manage to resolve your keyless remote issue jumping certain pins? I'm not a wizard when it comes to working electrically under the hood. Any suggestions would be greatly appreciated. Thank you. Pschonback1@gmail.com. Pschonback1@aol.com.
Unfortunately, I haven't resolved this issue. I gave up =(
Hopefully you found a solution. In the numerous forums and video tutorials I've found, the procedure in this video applies to the 2004 Kia Sorento. But instead of bridging or "jumping" pins 5 & 17, you want to do it for pins 5 & 6 for the 04 Sorento. I've tried this method, and it hasn't worked for me. Maybe I'm doing it wrong, or maybe there's some other issue.
Check this video out:
th-cam.com/video/ihujrLGemYw/w-d-xo.html
If it worked for you, please let me know! I apologize fore the late response btw.
Here's a link to the Diagnostic Pin chart for PIN# 5 & 6
connector.pinoutguide.com/20_pin_Kia_diagnostic_special/
How do I find Jump #5 and #17. It has 8 pins on 1st row and other 8 on 2nd row and then some. #1 start from left top? 12345678, 9,10,11,12,13,14,15,16 then 3rd row 1st pin is #17? Some part I couldn't hear what you said. can you write the steps in writing? Thank you for info.
+Joshua Kim Yes you are correct in the pin # locations. Start from top left
Ok, you are telling people all kinds of incorrect info. He just gave you the pin numbers BACKWARDS. The first row only has 4 pins (2 sets of 2) not 8.
What about a kia rio 2008?
There are no onboard programming instructions for a 2008 Kia Rio #youtube
where do you get a jumper pin?
just use a paper clip as your jumper pin
I have some for sale, just 20 bucks each.
I tried this and it doesn't work! I hear a relay click but NOTHING.
My advice is to make sure that your vehicle has been programmed already for keyless.
That's good advice, you should always verify your vehicle is equipped with keyless entry option before proceeding with these instructions
Will this work for a 2006?
This will not work for a 2006, you need to have a professional program a 2006 Kia Sedona key fob.
Hello. My name is cody. I ha e a few questions. I have a 2005 kia Sedona lx. I am the second owner and have all paper work (window stickers and manuals). My van was not equipped with keyless entry. I called kia and confirmed it. And asked what I need to do to add FACTORY keyless entry and the said it's not possible because it doesn't have the harness for the module. And that was a lie because I found the harness behind clove compartment and I purchased a remote and module separate on ebay and installed it. And tried multiple different programming instructions I found online using the diagnostic port under hood. What I am asking is. I have an 05. And want to add FACTORY keyless entry.
The wiring is there. I did the same cheap with my fog lights. Didn't come with them but bought them and the button and it was plug and play. What am I doing wrong? Does the key fob have module have to match or something. Please help....
Hi Cody, I don't think I am going to be much help. We do not install keyless entry systems and don't have any knowledge as to how to install them.
bring the pinout of this connector, the pin 6 jump to B+ not working
thanks for the info
is the same way for kia shuma 2002
These instructions only work for the sedona
do you have the instruction for kia shuma or vidio my freind thanks
I am sorry, I do not have the information on this vehicle
how to program keyless remote for 2003 elantra ?
+abdumka Unfortunately the 2003 hyudai elantra requires a professional to program the key fob to the vehicle. We suggest a locksmith, they are usually 50% the cost of the dealer to program. You can find a locksmith in your area by using our preferred locksmith locator here: blog.keylessentryremotefob.com/p/there-is-no-onboard-programming.html
It’s good for Sedona 2006 As well?
Unfortunatley this will not work for a 2006 Sedona. A 2006 Sedona requires a professional to program.
Nice!
Kia Sedona 2006 depends under the hood and not the same what do I do different
a 2006 kia sedona is not self-programmable, you will have to go to a professional locksmith or dealer to get a key fob programmed
Okay thank you appreciate your time
can it work for kia sorrento 2003
unfortunately a 2003 Kia Sorento does not have any self programming instructions, you have to go to a professional to have a key fob programmed
you know how programming alarm for entourage 2007
+Duli Serrano unfortunately there are no self programming instructions for a 2007 hyundai entourage, if you need to find a professional in your area visit: blog.keylessentryremotefob.com/2013/05/2007-hyundai-entourage-key-fob-remote.html
+Duli Serrano unfortunately the 2007 entourage is not self programmable, you need to go to a professional to program that remote: blog.keylessentryremotefob.com/search?cx=partner-pub-9359873407684367%3A7506621223&ie=UTF-8&q=2007+entourage&sa=Search
thanks
The 17 is empty😢
This won't work on a 2017, sorry!
Anyone try it for 2011 Kia Sedona??
Why can this be done on a 2002 Sedona, but not on a 2008 Sedona? I can't do it on my 2003 Kia Optima either. What information do you use to determine which vehicles can/cannot be be programmed manually? We have both an Autel IM608 and a Maxisys 906TS that can't do it. The IM608 offers a procedure and pictures to use the diagnostic port under the hood (but tells you to use pins 12 and 16, but there isn't a wire/terminal in pin16). The 906TS offers no information at all. How do you guys determine which can/cannot be programmed - other than a dealer?
Hi, you can use the link below to look up year, make and model and it will tell you programming directions if avaible or if you have to take it to a professional to be done. www.keylessentryremotefob.com/programming-instructions/
I can't figure out what pins to jump and you failed to show that in the video (literally the most important part)
Sorry about that, you can look up written instructions here www.keylessentryremotefob.com/programming-instructions/
Hi can l program kia shuma 2002 by this
OMG that is so fucking easy! 😂
Wat r u saying I can't understand u send me the directions
ONLY TWO REMOTES CAN BE PROGRAMMED TO THIS VEHICLE.
1. Open Hood and locate diagnostic connector near battery
2. Jump pin 5 to pin 17 with a suitable jumper wire.
3. Turn ignition to the ON position. ( DO NOT START)
4. Press LOCK button of first remote two times.
5. Press LOCK button on second remote two times. (if applicable).
5. Turn ignition OFF and remove key.
6. Disconnect jumper from diagnostic connector.
7. Check for lock and unlock operation. Horn will sound when locking.
@@KeyFobsPlus thanks
It's easier to steal my Sedona then it is to program the freaking key fob
🤣🤣
hi this good
Toyota RAV4 vs kia Sedona
I gave you a thumb down. Why? Because I was not able to follow you, what you did. Okay, you placed a bridge into the check-connector. 5 to 17. then you ran between cabin and engine lift off the bridge or not (?) and pressed five times the lock and the open?
If you wanna make such videos, so take your time. Explain, what you do. Give the camera time to follow what you are doing.
Sorry you where not able to follow the video, here are written directions on how to program the remote.
Kia Sedona 2003 Remote
This is the layout of jumper pins.
1 2 3 4
56 7 8 9 10 11 12
13 14 15 161718 19 20
ONLY TWO REMOTES CAN BE PROGRAMMED TO THIS VEHICLE.
1. Open Hood and locate diagnostic connector near battery
2. Jump pin 5 to pin 17 with a suitable jumper wire.
3. Turn ignition to the ON position. ( DO NOT START)
4. Press LOCK button of first remote two times.
5. Press LOCK button on second remote two times. (if applicable).
5. Turn ignition OFF and remove key.
6. Disconnect jumper from diagnostic connector.
7. Check for lock and unlock operation. Horn will sound when locking.
@@KeyFobsPlus Thanks a lot! :)
How do we know that it didn't work before? You have to have a beginning, a middle and an end. You started mid stride. Not very informative.
Good point, thanks for this feedback. We'll pass it along so we try not to miss that next time
แอ