Thanks, this will save people a lot of money that dealerships over charge and locksmiths just to reprogram something in a few minutes. May God Bless you.
First of all, THANKS FOR THE VIDEO! It helped a lot! 1) I have a 2004 Sonata GLS 2.7. I could not get the black box to slide off for nothing. So, like many others I pried it with a screw driver (between the metal and the black box) and it popped right off, breaking the clip (who cares). The switch is on the back (engine side). I was able to turn the box toward me just enough to take a long skinny screw driver to move to SET. Once I turned the key to ON for 5 seconds, moved to SET, pressed LOCK on both remotes and moved the switch back to OFF, all worked fine.
Bo Knowles... that's exactly what I did. Like you said who cares about the clips. It's not going anywhere. It's hard to explain that process but it's fairly easy. Dealerships charge alot for this. But Your Welcome. Glad to hear the video helped.
+Tiffanie Watkins I can answer that for you. In my case it slid towards you. But again if it pops off, it's no big deal. It has nowhere to go but to just lay there. But still be gentle not brutal. HUGE TIP: Use a phone. Take pics with Flash on. You'll get a better look. Good luck.
Hey dude... U r really awesome... I tried it in my Hyundai Sonata 2002 GLS... For the first couple of times I was unable to find the switch... Third time I just pulled the black box towards right then I was able to feel the switch... It was OFF. I turned it to SET and hold on the lock push button in remote for 5 seconds... Turned the switch back to OFF position and tried... Hurray.... Its working... Thanx a lot buddy... Note: Push downwards to make the switch to SET position.
qihang zeng the switch is in a small black box hidden a little to the left/bottom area. Feel around. Once you find the box, feel for a hole facing the front of your car. The button is in there. So I do recommend prying off the case with a thin fathead screwdriver. Don't be brutal with it cause you don't want to damage the inside. Let me know what happens. Good luck.
I just got my two fobs paired successfully but they won’t open or unlock the car outside of it. I have to physically have the key fobs right next to the transponder inside the dash what’s wrong here?
Did you do steps 2:30-3:15 correctly? I do you have 2 remotes, you must progem them simultaneously while in SET. Then when done, put the switch back to Off. I don't have this vehicle anymore. Lmk tho. I can try to help.
Thanks it was helpful. I did it. However I like to let you and other know, in my case it was little more complicated. In my Hyundai Sonata 2004 on the circuit board no switch was present. There was just place for soldering it. To complete operation I has to remove board from the car, solder same short piece of wire and connect it to simulate switch.
@Kubas I have the same issue you had. my car does not have the switch. how did you simulate the switch? what soldering points you temporarily connected to set the board to "Set" position?
Hi I have a 04 elantra with a black box I cant find a switch what did you do to soder yours did you open the black box and soader something also how do you remove the black box I tried I cant remove mine.
Do the doors have to be in Unlock/ or Lock mode? Different videos you've uploaded say different things. Do I hold unlock or Lock? Mine won't work but ended up setting off my alarm (which Ive never heard before)
qihang zeng ...the SET/OFF is "the switch"...it's square. So it moves up and down. Put it on SET when programming and OFF when you're done. That's it. Let me know if you need further help.
I have a 2004 Sonata. Is there an override to the alarm if your keyless remote isn't working? Also, I want to buy another keyless remote. Is the dealership the best place to get it? I heard that some of the remotes off the internet don't work because you can't program them. Thanks so much! All the best. (Great video, by the way!)
I doubt that there's an override. I'm not an expert though. I did buy 2 remotes on eBay (almost new, but used) for less than I would've bought just 1 of the dealership. And with a little research I programmed them myself. Saved a few hundred bucks. The dealership also charges you for each remote that you program. I strongly suggest doing it my way. It's not very hard. eBay & a little work. (Just make sure you but the correct remotes. Not just the shells. Be careful. Read.
Hi, I have a 2005 sonata, I followed the video and remove everything. I can see the "set" and "off" on the box, but there's no button on it. what should I do? Thx
I have just purchased a 2005 Sonata. With your help, I found the module. It is part # 95790-3D002. Mine has NO visible switch either on the box or on the panel inside the box. There must be some other way to activate the system. The only holes in the box are for 2 connectors. Any suggestions?
Sorry, I'm no expert. My module (box) actually cracked open after. I should say, "the shell" that contains the small motherboard (for lack of a better word). Which isn't a big deal at all. I can see the switch very easily this way. Haha! But the shell did have an access hole for the switch. In its original state, it'd be hard to access it. That's all I can actual tell you. I'll answer any questions , that I can. Good luck.
I'm sorry, but I'm not a specialist at all. I have a 2004 Sonata. I just posted the videos in case it would help anyone. I did look into yours, but couldn't find anything. Sorry. Good luck. Let me know if you solve your problem.
is the box behind the radio part or the air condition controls part? Mine has the double sized radio because it has a tape and CD would I need to remove my radio to get to he box since its the double size?
yes, mine was behind the climate control box. I'm sure yours is there as well and you'd have to remove your stereo as welk. it's well worth ($) the trouble to check.
This was helpful but I think the dealership removed the on off switch and put tape there. So I can’t reset it. 😢 buteverything else was easy and I got the box out etc.
Trust me, it's hard to find because initially I couldn't find it. It took me a couple times to take it apart and try again. Lol Be patient and feel around with your hand. I'm not a specialist at anything tho. But Good luck.
My didn't work when I did the set and everything!! Is there a reset button as well maybe it will do it starting from there? I also have a2004 Hyundai Sonata !
Marco Sacco no reset button that I know of. But many ppl commented that it work d. Not many say it didn't. I actually did 3 video. Trying to improve each one. Maybe watch them all, cause I might've missed something on this last one. I'd try again. It's worth it. Maybe step by step? Good luck.
hi i have hyundai santa fe 2003 i found two black boxs one at bottom left and one right behind the ash tray ,but none of them have a set switch,i opened the one bottom left to see circuit board but till no set switch /?
I know the switch is small, it's facing towards the front of the car. mine was a little to the left side. I know on one of my videos, someone commented that it worked on his 2003 as well. all I can suggest is keep looking since you already went that far. I made 3 vids total. maybe I did something different on 1 that may help. good luck. let me know.
I have a 2003 Sonata, I followed all the steps, found the black box, and successfully popped it open. And all that's in there is the motherboard, I see no switch or "black box", help?
Hii!!....actually I have a 2002 Sonata and it has a problem like my keyless entry remote is working but there is no response from the car when I press the button and also when I open the door manually with the key; the anti-theft alarm do not goes off.Is this the fuse or relay related problem?...if so then pls help me to find out where that damn part is located in the car!!
Sorry to hear that. But I'm not a specialist at this. I made 3 different videos here explaining my situation and to help anyone out with same issue. I'd try this if I were you. It may work. Good luck.
Hello sorry to bother you,I could not be able to find a separate box for the alarm Hyundai xg 30 but I could only see the immobilizer and just metal case but there is nothing likes a switch of off or set on both boxes so I guest I have get where it is located
Sorry but I'm not sure. I'm not a specialist. This worked for me so I figure I'd post the video if it could help anyone else. Just a little FYI, my switch was just a small black square that slides. Make sure you look again. Good luck.
Sorry but I'm not a mechanic. I'm just sort of handy. I did this video cause I couldn't find one to help me. So I figure I'd try to help anyone save some money if I could. I didn't even know what an immobilized was... But I googled it. I can try to help. Does your key have a chip in it?
On one of my other videos, someone with a 2002 said it worked just like my 2004. So I would suspect that it's gotta be there. Look carefully with good sunlight. It's not the biggest box. It's attached to the side-corner, so not too easy to find. It's worth trying again. Let me know if it helps or if you need help. Good luck!
+Charlie Jefferson j made this video 1st...look at the description. I put the steps I took. Let me know if you get it to work. Here's the link... th-cam.com/video/QKpnr2-CfRk/w-d-xo.html
Everthing you show in the second video and the step it's perfectly correct.but the only step when you say push the locked button that's what I have hard time with. But. I took couple try to fiber it out. The solution I came up with when I swtiched to set. On the box I pushed both lock and trunk on the remote. After that I got it working. Thank you for that video and for checking up. 2004 hundai sonata gls
Sorry about not replying earlier. My old phone didn't let me and I don't have a computer. Anyway, I'm not sure. I did a lot of searching on Google to find mine. Sorry j know that's not much help. Good luck.
Mike Lepage oh ok. I was able to do both. After doing this a couple times (for video purposes) it is super easy to do. I mean, one is good but two is better. But at least now you know how👍 saved some cash🙌🙌🙌
I'm not sure. I only did this after the research I found on my car. I was successful in my situation, that's why I did a video in hopes of helping anyone. I didn't come across any already on here to help me. Sorry for not being too helpful but search around. Good luck. Save money. It's worth the research.
Hyundai got slick with my module... there was a piece of tape over the hole, and when I removed it, there was no switch, just the words for set and off. smh
@@printer003 nope. Remember, mine had no switch. I search Ebay for used modules, and those also seemed have no switch. lol and I am not paying for a brand new one. I guess I will have to let the dealership program my fob... I think it can be done through the OBD port.
I believe so. Someone commented that it worked on their 2002. Mine is 2004. So 2003 should also be the same. It's well worth a try. Save big bucks. Let me know. Good luck.
I'm not sure. I would suspect YES, but I'm not an expert. I did alot of research/googling just to find the location of the box. So I did these videos to help others. If I were in your place, I'd try it. It's worth trying cause the stealership will charge you some good money. Let me know if you need any help. Good luck.
Ivy Obienty I'm sorry, I'm not a specialist. I did mine cause I owned a sonata. Dealerships really do take advantage of people. Keep searching. Good luck.
i'm not an expert at all. i just figured out on how to do this car through much google search work. i didn't find a video on youtube so i figure maybe mine could help. sorry.
Thanks, this will save people a lot of money that dealerships over charge and locksmiths just to reprogram something in a few minutes. May God Bless you.
First of all, THANKS FOR THE VIDEO! It helped a lot!
1) I have a 2004 Sonata GLS 2.7. I could not get the black box to slide off for nothing. So, like many others I pried it with a screw driver (between the metal and the black box) and it popped right off, breaking the clip (who cares). The switch is on the back (engine side). I was able to turn the box toward me just enough to take a long skinny screw driver to move to SET. Once I turned the key to ON for 5 seconds, moved to SET, pressed LOCK on both remotes and moved the switch back to OFF, all worked fine.
Bo Knowles... that's exactly what I did. Like you said who cares about the clips. It's not going anywhere. It's hard to explain that process but it's fairly easy. Dealerships charge alot for this. But Your Welcome. Glad to hear the video helped.
+Bo Knowles Hi Bo. Which way is the box supposed to slide? I found it but could not get it to move.
+Tiffanie Watkins I can answer that for you. In my case it slid towards you. But again if it pops off, it's no big deal. It has nowhere to go but to just lay there. But still be gentle not brutal. HUGE TIP: Use a phone. Take pics with Flash on. You'll get a better look. Good luck.
I have a 04 elantra with a back box cant find the switch mine is not mounted like this
Hey dude... U r really awesome... I tried it in my Hyundai Sonata 2002 GLS... For the first couple of times I was unable to find the switch... Third time I just pulled the black box towards right then I was able to feel the switch... It was OFF. I turned it to SET and hold on the lock push button in remote for 5 seconds... Turned the switch back to OFF position and tried... Hurray.... Its working... Thanx a lot buddy... Note: Push downwards to make the switch to SET position.
Congrats! A little work saves you good money. Glad to help. Thanks for the feedback.
kishore kumar galla
Mine doesn't have a switch. Any to get around that, like buy one with a switch and install it?
qihang zeng the switch is in a small black box hidden a little to the left/bottom area. Feel around. Once you find the box, feel for a hole facing the front of your car. The button is in there. So I do recommend prying off the case with a thin fathead screwdriver. Don't be brutal with it cause you don't want to damage the inside. Let me know what happens. Good luck.
Thanks for saving me a trip to the dealership. :)
I just got my two fobs paired successfully but they won’t open or unlock the car outside of it. I have to physically have the key fobs right next to the transponder inside the dash what’s wrong here?
Did you do steps 2:30-3:15 correctly? I do you have 2 remotes, you must progem them simultaneously while in SET. Then when done, put the switch back to Off. I don't have this vehicle anymore. Lmk tho. I can try to help.
Thanks it was helpful. I did it. However I like to let you and other know, in my case it was little more complicated. In my Hyundai Sonata 2004 on the circuit board no switch was present. There was just place for soldering it. To complete operation I has to remove board from the car, solder same short piece of wire and connect it to simulate switch.
Wow ... That's way different. I wonder if the time of the year it was build makes that much of a difference? But thanks for the info.
@Kubas I have the same issue you had. my car does not have the switch. how did you simulate the switch? what soldering points you temporarily connected to set the board to "Set" position?
Hi I have a 04 elantra with a black box I cant find a switch what did you do to soder yours did you open the black box and soader something also how do you remove the black box I tried I cant remove mine.
Do the doors have to be in Unlock/ or Lock mode?
Different videos you've uploaded say different things. Do I hold unlock or Lock? Mine won't work but ended up setting off my alarm (which Ive never heard before)
not 100% sure. its been a while. i don't own that car anymore. i'm almost sure i had the doors locked.
printer003 all good. I couldn’t get it to work so returned it. Thanks anyways bro!
oh ok. sorry for the late reply.
Awesome. Thanks a lot for doing the third video.
np.
qihang zeng ...the SET/OFF is "the switch"...it's square. So it moves up and down. Put it on SET when programming and OFF when you're done. That's it. Let me know if you need further help.
I have a 2004 Sonata. Is there an override to the alarm if your keyless remote isn't working? Also, I want to buy another keyless remote. Is the dealership the best place to get it? I heard that some of the remotes off the internet don't work because you can't program them. Thanks so much! All the best. (Great video, by the way!)
I doubt that there's an override. I'm not an expert though. I did buy 2 remotes on eBay (almost new, but used) for less than I would've bought just 1 of the dealership. And with a little research I programmed them myself. Saved a few hundred bucks. The dealership also charges you for each remote that you program. I strongly suggest doing it my way. It's not very hard. eBay & a little work. (Just make sure you but the correct remotes. Not just the shells. Be careful. Read.
printer003 Appreciate the input. Thank you!
+Open-minded Skeptic you're welcome. Let me know if you have any more questions regarding my videos on this.
Hi, I have a 2005 sonata, I followed the video and remove everything. I can see the "set" and "off" on the box, but there's no button on it. what should I do? Thx
Hey did you ever find out if that worked for you 2005?
I have just purchased a 2005 Sonata. With your help, I found the module. It is part # 95790-3D002. Mine has NO visible switch either on the box or on the panel inside the box. There must be some other way to activate the system. The only holes in the box are for 2 connectors. Any suggestions?
Sorry, I'm no expert. My module (box) actually cracked open after. I should say, "the shell" that contains the small motherboard (for lack of a better word). Which isn't a big deal at all. I can see the switch very easily this way. Haha! But the shell did have an access hole for the switch. In its original state, it'd be hard to access it. That's all I can actual tell you. I'll answer any questions , that I can. Good luck.
Hi Printer003,
Does this also work for a Hyundai Tucson 2008????
I can't find the box!!!!
Thnx
I'm sorry, but I'm not a specialist at all. I have a 2004 Sonata. I just posted the videos in case it would help anyone. I did look into yours, but couldn't find anything. Sorry. Good luck. Let me know if you solve your problem.
is the box behind the radio part or the air condition controls part?
Mine has the double sized radio because it has a tape and CD
would I need to remove my radio to get to he box since its the double size?
yes, mine was behind the climate control box. I'm sure yours is there as well and you'd have to remove your stereo as welk. it's well worth ($) the trouble to check.
This was helpful but I think the dealership removed the on off switch and put tape there. So I can’t reset it. 😢 buteverything else was easy and I got the box out etc.
Hi there, will this work on hyundai coupe , thanks mate!!!.
Awesome! Thanks for the info. And you're welcomed. I'm just glad you didn't go to the STEALERship. Lol!
I just did all that got to the black box .the outer cover has off and set on it ..but there's no switch!!
Trust me, it's hard to find because initially I couldn't find it. It took me a couple times to take it apart and try again. Lol Be patient and feel around with your hand. I'm not a specialist at anything tho. But Good luck.
My didn't work when I did the set and everything!! Is there a reset button as well maybe it will do it starting from there? I also have a2004 Hyundai Sonata !
Marco Sacco no reset button that I know of. But many ppl commented that it work d. Not many say it didn't. I actually did 3 video. Trying to improve each one. Maybe watch them all, cause I might've missed something on this last one. I'd try again. It's worth it. Maybe step by step? Good luck.
hi i have hyundai santa fe 2003 i found two black boxs one at bottom left and one right behind the ash tray ,but none of them have a set switch,i opened the one bottom left to see circuit board but till no set switch /?
I know the switch is small, it's facing towards the front of the car. mine was a little to the left side. I know on one of my videos, someone commented that it worked on his 2003 as well. all I can suggest is keep looking since you already went that far. I made 3 vids total. maybe I did something different on 1 that may help. good luck. let me know.
I have a 2003 Sonata, I followed all the steps, found the black box, and successfully popped it open. And all that's in there is the motherboard, I see no switch or "black box", help?
braden on that actual motherboard, there is a small switch. Feel around the four sides. It should b on there.
I have a 2008 Sonata. Any suggestions?
+Jake Jones unfortunately, i don't. research alot. well worth it. good luck.
Hii!!....actually I have a 2002 Sonata and it has a problem like my keyless entry remote is working but there is no response from the car when I press the button and also when I open the door manually with the key; the anti-theft alarm do not goes off.Is this the fuse or relay related problem?...if so then pls help me to find out where that damn part is located in the car!!
Sorry to hear that. But I'm not a specialist at this. I made 3 different videos here explaining my situation and to help anyone out with same issue. I'd try this if I were you. It may work. Good luck.
worked for me first try. thank you!!!!##
I see on the board an orange cart with the trunk open and do not pull the electric locks and the alarm
Hello sorry to bother you,I could not be able to find a separate box for the alarm Hyundai xg 30 but I could only see the immobilizer and just metal case but there is nothing likes a switch of off or set on both boxes so I guest I have get where it is located
Sorry but I'm not sure. I'm not a specialist. This worked for me so I figure I'd post the video if it could help anyone else. Just a little FYI, my switch was just a small black square that slides. Make sure you look again. Good luck.
Thanks I so much appreciate that I'll look again but am just confused maybe the black box immobilizer also works for the alarm
hello dear can you help me how to program hyundai starex crdi 2006..plssss
Sorry but I'm not a mechanic. I'm just sort of handy. I did this video cause I couldn't find one to help me. So I figure I'd try to help anyone save some money if I could.
I didn't even know what an immobilized was... But I googled it. I can try to help. Does your key have a chip in it?
I can't locate the switch on my huyndai sonata 2003? Can u help me!?
On one of my other videos, someone with a 2002 said it worked just like my 2004. So I would suspect that it's gotta be there. Look carefully with good sunlight. It's not the biggest box. It's attached to the side-corner, so not too easy to find. It's worth trying again. Let me know if it helps or if you need help. Good luck!
Is that the same way to do it for a 04 Hyundai elantra
Hi did you have any luck with your 04 elantra getting the fob programming
I have a 2005 sonata I removed the panel I can't get to the back to see the black box
Yeah, even in my 2004, there's very little room. That's why I suggest, using daylight. Try again. It's worth the savings. Good luck!
Does it work on an 05 elantra
lock button or unlock whiche one when you put on set
.thanks
Lock button for a couple seconds. Good luck!
Still can't get it to work..any other suggestions
+Charlie Jefferson j made this video 1st...look at the description. I put the steps I took. Let me know if you get it to work. Here's the link... th-cam.com/video/QKpnr2-CfRk/w-d-xo.html
+Charlie Jefferson did that work after all?
Everthing you show in the second video and the step it's perfectly correct.but the only step when you say push the locked button that's what I have hard time with. But. I took couple try to fiber it out. The solution I came up with when I swtiched to set. On the box I pushed both lock and trunk on the remote. After that I got it working. Thank you for that video and for checking up. 2004 hundai sonata gls
would any one know if this would work on Hyundai Matrix 2007? would the box be in the same location?
I have a 2004 hyundai matrix would it have the box if you found yours could u tell me we're to u found it as looked every were
Hello! Where is the box for a 2011?
Sorry about not replying earlier. My old phone didn't let me and I don't have a computer. Anyway, I'm not sure. I did a lot of searching on Google to find mine. Sorry j know that's not much help. Good luck.
+printer003 I appreciate your response. Be well.
I am trying to program more than one it will only do one what am I douing wrong
Mike Lepage I tried one at a time. Seemed like one always unprogrammed, so then I did both at the same time. Worked for me. Did this help?
still same will only do one
Mike Lepage oh ok. I was able to do both. After doing this a couple times (for video purposes) it is super easy to do. I mean, one is good but two is better. But at least now you know how👍 saved some cash🙌🙌🙌
Will this work on a 2003 kia sorento?!
I'm not sure. I only did this after the research I found on my car. I was successful in my situation, that's why I did a video in hopes of helping anyone. I didn't come across any already on here to help me. Sorry for not being too helpful but search around. Good luck. Save money. It's worth the research.
Hyundai got slick with my module... there was a piece of tape over the hole, and when I removed it, there was no switch, just the words for set and off. smh
Your correct. Did you do it successfully?
@@printer003 nope. Remember, mine had no switch. I search Ebay for used modules, and those also seemed have no switch. lol and I am not paying for a brand new one. I guess I will have to let the dealership program my fob... I think it can be done through the OBD port.
@@djmmcee sorry to hear that. Good luck.
where did u get the remote?
Ebay. Cheap. Look around. Just make sure you're not just buying the casings. Goodluck!
Does this work on a 2003 sonata
I believe so. Someone commented that it worked on their 2002. Mine is 2004. So 2003 should also be the same. It's well worth a try. Save big bucks. Let me know. Good luck.
Anyone know if this works for the Elantra too?
polarstar I would think so just cause they're very similar cars. But try google. Good luck.
Can I program a 2001
I can say that from my feedback, people say it's the same as in this 2004. I hope it helps. Let me know. Goodluck!
This work on Hyundai Sonata 2011
I'm not sure. I would suspect YES, but I'm not an expert. I did alot of research/googling just to find the location of the box. So I did these videos to help others. If I were in your place, I'd try it. It's worth trying cause the stealership will charge you some good money. Let me know if you need any help. Good luck.
Did you figure anything out, in your situation?
the alarm go off, what should i do....
Mark Marques Mullan Watson idk, can you use the FIB remote?
Mine didn't do shit help please
Where are you in your issue? And what year?
I have a 2002 hyundai santa and im just like fuck it I bought fob i just don't want to fuck anything up
JA Chocolate it's easy to do
JA Chocolate saves you good money.
idk i will see
Your accent is too thick bro. It gives anxiety.
@@timothytorres26 I know. Me too.😂
I . 😆
Is it the same on 2005 elantra????
hello dear can you help me how to program hyundai starex crdi 2006..plssss
Ivy Obienty I'm sorry, I'm not a specialist. I did mine cause I owned a sonata. Dealerships really do take advantage of people. Keep searching. Good luck.
i'm not an expert at all. i just figured out on how to do this car through much google search work. i didn't find a video on youtube so i figure maybe mine could help. sorry.