How To Connect Your Spark 40 To Studio One
ฝัง
- เผยแพร่เมื่อ 24 ส.ค. 2024
- Having trouble following the directions at Positive Gride to get your Spark 40 connected to Studio one? Sometimes a visual walk-through is just what you need. A TH-cam user asked me to show them how and I obliged. I hope it helps. Below are the links to the directions from Positive Grid as well as the link to the Asio driver (Spark USB Control Panel).
#positivegrid #studioone #presonus #presonusstudioone
The instructions I followed - help.positiveg...
Spark 40 Driver: help.positiveg...
![ถามตรงๆ กับ อาจตุพร ทำไม ประเทศไทย ใครเป็นนายก ก็โดนด่า พอออกเเล้วคนคิดถึง!!?? l [Nickynachat]](http://i.ytimg.com/vi/3YFLMXxBGAs/mqdefault.jpg)
excellent, you hit on both, the no recording with input and the monitoring with headphones questions I was looking for in a short to the point video.
Glad it helped.
So, so helpful. Many thanks my friend, I was having troubles but you addressed them clearly and concisely. Can't thank you enough 😁
Glad I could help.
Thanks G, I'll give it a try and see if I can record. I had no luck recording before I was doing something wrong, hopefully this will help.
It works, tx. Greetings from the Netherlands.
Glad it helped!
Thank you for your help
Thanks, a big help!
Thank you sooooo much dude!! You rock!!
DUDE! Thanks for this video! Awesome! Helps a TON! \M/
Great video man!
Thank you, this helps
This was very helpful for me as I couldn't clearly obtain all the settings that you provided to make it work from other references. It works!
I did no additional changes that I'm aware of but have like a chorus effect added the signal is completely changed when I tap the record button in the upper left-hand corner for the track. That's my next goal it sounds great clean but it's not what I want on every track and don't know how to control it. Maybe that's the stereo output effecting it?
That may be a setting in your DAW that's doing that.
@@Guitarnivore thank you for the response, I'll play with it, I am new to this. Honestly, I just want to play and not go down too many rabbit holes, but this will be a great tool for me. Gear can be distracting 🫨. 👍
@@wooggeek gear can be very distracting! I mainly use a Boss Katana into a USB interface, so I haven't played with the Spark much with USB. I've only really done it with this video.
thanks dude, very helpful
...ya know, I tried to use the spark in my DAW. But, there were so many technical challenges getting the audio into the DAW. I find it so much easier to just use the headphone jack out of my spark mini straight into my Audiobox and ALL problems are solved. I believe the ability to use the Spark as an interface is as a last resort in the face of NOT having an interface.
In all honesty, that is the easiest way to do it. It seems once you start getting into USB, then you have latency and any other technical problems, inputs, outputs, etc. If I ever use my Spark for recording, I'll do the same. I do that with my Boss Katana and run it through a Behringer DI box to level things out a bit. I honestly don't see the advantage to recording through USB. The only reason I made this video was because it was requested. Thanks for commenting!
@@Guitarnivore Plus the audio out is stereo so...
@@saguarotreker I have a presonus Audibox. are the inputs on that stereo? If not, I know I have a stereo to split mono cable I could user if needed.
@@Guitarnivore From my spark I use a stereo breakout cable. Should have included that detail...
@@saguarotreker Gotcha. I have a couple, but I'll have to dig up my 3.5mm to 1/4" adapter. And here I was going to buy a 3.5mm TRS to 1/4" ts cable, which would have just made it mono again. 😆
I just fired up presonus after not recording for a while. fired it up, followed these instructions but no matter what i do im hearing my guitar twice while recording and its throwing me off. but when i hear the play back, it only recorded one guitar and it sounds fine. i cannot for the life of me fix this and its driving me insane
edit: after not being dumb for 2 seconds, i realized i was monitoring on the same track while i was recording so thats what was causing the "doubling" effect. to turn that off, simply hit the monitor icon next to the record button on the channels
You may have to adjust the latency settings.
can i get positive grid usb audio control panel
Thanks alot man ive been having trouble but i think i migjt have installed the wrong driver.
Thanks, Question: I'm trying to connect my phone bluetooth to the spark which I can do normally without presonus on. This way I can feed drumbeats from youtube into the amp while I play. It works flawlessly. However when I try to record, the phone doesn't have any sound. Since my drumbeat from the phone and my guitar are combined going into the grid, I dont see why it can't feed into presonus track?
It could be because the amp desables certain things when it's connected to a DAW. You might want to ask around Reddit and see if there is a solution.
I'm hoping to do this install this weekend. Once you do this install, is Studio One now on your laptop? Or can you only access Studio One DAW from through the Spark software? Thanks
It's on your computer. You can use it with other interfaces. It's a free version, so it's limited.
Can you mention the very first thing that you said when you said I’m gonna assume you have your spark plugged into your computer and”control panel” or oseo driver. I’m not familiar with this.
If you haven't already, visit this page and follow the instructions for downloading the asio driver for the spark. That should get you where you need to start. help.positivegrid.com/hc/en-us/articles/360039598451-Installing-Windows-Driver-for-Spark-Video-Tutorial
Thank you brother
I was doing the exact same thing. I can press the blue volume button but i can't hit the red record button still. Any advice?
I followed your steps and while on the left side of the track with the preview volume indicator, my recording seems to be loud and dynamic like your video here, when it gets recorded into the tracks its very quiet, how do I fix that?
I'm not sure. That sounds like it could be a setting in your DAW.
@Guitarnivore I'm using this studio one as shown in the video, do I need to normalise the audio?
@@-dash. I am no expert in Studio one, so this might help more than I can. support.presonus.com/hc/en-us/articles/210046083-Why-is-my-recorded-signal-too-low-or-quiet-
one thing that is bothering me is that i cant have my output device be my speakers, its only coming through my amp
I don't like that either. Same thing with trying to record from USB with the Boss Katana. That's why I run a line out to an audio interface instead.
kinda got used to it but still dont understand it
@@Guitarnivore
@@hmnibailcoitatatososwtbtoo7532 It has something to do with Studio One. It doesn't allow separate input/outputs. Aggravates the shit out of me.