Having a hell of a time removing the bearings from the hubs. It just does not seem to be enough of a lip in there to catch any punch or screwdriver on enough to hammer it out.
Genes Page i am not sure if videos. i do have a few questions which might give you some video ideas. number 1. are these motors normally noisy? this 700 i purchased used from a guy has me nervous about every little thing because on my first ride my oul over flow was filled with gas. so i am not sure if it was from running it for short periods or than shutting it off. or if its running rich. i have no idea what mods havr been on it. do i dont know if the brains are registered with a fuel managment system and is running rich. i think it needs a new clutch which i would like to do and will be looking for videos for that. currently im trying to learn adjusting throttle, idle speed, i know the idle screw but on the housing above that it also has another screw on the bottom left of the throttle housing that you have to loosen the nut to take it in and out. what does that adjust? also another issue i am having recently and maybe its related but startimg out in first i immediately at high rpm like redlining as soon as i touch the throttle? any how i have been meaning to answer bit nothing came to mind so i needed a bit. lol. hope it isnt too much.
Brandon Tappan well sounds like there's a lot of things going on with it but I'm not sure the only way I'd be able to get a motor running with that many issues is trial and air. Think of it like trouble shooting fix and major problems first and go from there
Having a hell of a time removing the bearings from the hubs. It just does not seem to be enough of a lip in there to catch any punch or screwdriver on enough to hammer it out.
Matt Bonacci use a small punch and grind it to a point. That is the hardest part. Put heat to it if you haven't
Great video with details 👍👍
Tnx for the video man! really informative :)
I'll try that once I'll get the new bearings, I'll let you know who it worked for me
Thank you for this great video! Everything worked like explained 😉
I like the detail u go into for this video how you show every step of the process vary helpful do u have one on a arms and the ball joints assembly
Sadly no I sold my raptor this year
Awesome video where do you order your parts from?
RockyMountainatvmc.com
So much easier to change the next time once you get the OEM ones out
awesome video man. i like the detail you put in to it, a great help!
Brandon Tappan any suggestions on videos of anything else and maybe I can help
Genes Page i am not sure if videos. i do have a few questions which might give you some video ideas. number 1. are these motors normally noisy? this 700 i purchased used from a guy has me nervous about every little thing because on my first ride my oul over flow was filled with gas. so i am not sure if it was from running it for short periods or than shutting it off. or if its running rich. i have no idea what mods havr been on it. do i dont know if the brains are registered with a fuel managment system and is running rich. i think it needs a new clutch which i would like to do and will be looking for videos for that. currently im trying to learn adjusting throttle, idle speed, i know the idle screw but on the housing above that it also has another screw on the bottom left of the throttle housing that you have to loosen the nut to take it in and out. what does that adjust? also another issue i am having recently and maybe its related but startimg out in first i immediately at high rpm like redlining as soon as i touch the throttle? any how i have been meaning to answer bit nothing came to mind so i needed a bit. lol. hope it isnt too much.
Brandon Tappan well sounds like there's a lot of things going on with it but I'm not sure the only way I'd be able to get a motor running with that many issues is trial and air. Think of it like trouble shooting fix and major problems first and go from there
what is better oem(plastic seal) or aftermarket(metal seal)?
Honestly no sure depends on the riding condition
👍thank you! 🌹
What size socket did you use to bang it in
Ryan Korver it’s been awhile but I think it was 30 or 31
What kind of rims do you have
Trevor Schulze ITP a-6 Baja wheel
Genes Page Ok thank you
Great video man. Used this when I did mine