Before you guys go crazy in the comment section, tuning with Brent is still on. I had my car tuned with my tuner to have my car ready for track around the corner. Plus I had my tuner fly out to tune EVERYONE else’s car that’s been on the channel. So y’all take it easy. Thanks .
Just a heads up Static, I saw a few dyno vids from PFI that the setup had issues with coil on plug. Maybe take a set of plug wires and an OEM honda distributor when you take to RedZone for a tune. Love the content as always bro!!!
If the coil on plug is done right there usually aren't any issues. I did see the PFI Speed video where they took it off because of a miss. They didn't fix the coil on plug kit misfire. Not sure what the problem was. Bad coil maybe.
I really enjoy watchin you do your thing man. I lost my best friend a year ago on Halloween and you look like him too. We were Honda Brothers and I miss him but in still build my cars and have my fun . I'm actually AWD converting my turbo EP3 soon. I wish i could show you how it is now. I'm a fabricator and machinist.
I installed the hondarulez kit myself (i.e soldering the knock board pinout on the ecu) it wasn`t hard to install and runs great (neptune on an lsvtec).
I remember that you chased down Brent from PFI like a blood hound to tune your car , yet you are going to someone else now , I was looking forward to seeing that collaboration. . .
That system looks nice 👍 and I finally got my hands on a complete ep3 head for my k20/k24a1 build bro and watching the update on your REX got me so pumped I can’t wait to get this build really going because my dad just found a complete, one owner 89 CRX Si but I have to get it shipped over seas... Keep doing what you doing bro 💯👍🤙💪
Love the civic I used to have a 89 hatch with a b18a and a gsr head but lent it to a friend and well don't have it anymore keep up the work on them cars bro
@youngstatic I own a 2005 Honda Element with a 5 speed. What are some drawbacks of my engine head? I hear that the VTC is only on the intake side. Can I still slap a turbo kit on and just enjoy having a boosted engine. Or will it be pointless without a head swap? I am just inspired to boost by your videos.
Does anybody know if this kit will work on a p72 ecu? I know that the p72 has the knock sensor board components on that side that the hondarulez board goes. Can anyone give me advice on this or know if i can delete the p72 knock sensor board?
@@reboo0t if i desolder the connections the ecu will still work like normal right? I have a p72 with a s300. So i always disable knock/IAB. Will the ecu run normal if i remove it?
Yes it will work on a p72 I’m an authorized dealer of the hondarulez cop mini hit me up on Instagram @hiboost_motorsports or on Facebook hiboost motorsports
Another great video💪💪💪💪💪 Can't wait to see you riping through the gears On another things,being a car audio guy in the past can help to notice the alpine deck Are you keeping a basic setup or gonna be adding some tunes?? I mean the sounds of boost are golden but to me is not a real "Street car" without sounds
Hey bro I'm a subscriber love ur work but it seems like when I ask any TH-camr question no one response. My question is what harness to get for k20 with a 6spd transmission to get for an ek?
Dude help!! My heater wont work. I get fans to blow, i can turn the heat from cold to hot, i flushed the heater core, i put in a new thermostat, but no heat. No one seems to know other than a new heatercore, and i really really really dont want to take the dash out of my CRX to get to it.. Anything else i can try.. Thanks man.
Flow test it . disconect both heater core lines hook up a garden hose turn it on and see if water comes out the other hose of it doesnt its probably clogged up . if it does flow . then most likely the valve that turns the heater core on is broken or stuck .if I remeber right its cable driven valve
@@dabtech7456 thanks Dru, but yeah that was first thing i did. flushed it both ways no flow issue at all. I also unhooked the cable driven valve and turned it back and forth by hand, from one side to the other still no heat.
@@figuresix ok id check the valve . ive had the valve break on the inside .it would look like its opening and closing but the internals are not rotating the lil ball valve seperated
Ryan E I’m currently living in Hawaii and I’m originally from the Bay Area northern Cali and I co-own a dyno In nor cal and flew out to tune cars. I also remote tune.
Before you guys go crazy in the comment section, tuning with Brent is still on. I had my car tuned with my tuner to have my car ready for track around the corner. Plus I had my tuner fly out to tune EVERYONE else’s car that’s been on the channel. So y’all take it easy. Thanks .
They should of paid attention to the footage of u an Brent lol u clearly stated this then, much love big homie
Brooo that no mames was legit😂 btw i didn’t know you knew spanish😦
Can you make a video on how to calibrate a tps using hondata
"i just vacuum my car, no mames what are you doing" fucking a i laughed on that one😂 good vid as always, them coils looking sweeet!
Just a heads up Static, I saw a few dyno vids from PFI that the setup had issues with coil on plug. Maybe take a set of plug wires and an OEM honda distributor when you take to RedZone for a tune. Love the content as always bro!!!
If the coil on plug is done right there usually aren't any issues. I did see the PFI Speed video where they took it off because of a miss. They didn't fix the coil on plug kit misfire. Not sure what the problem was. Bad coil maybe.
my car has already been dyno'd, tracked and currently racking miles. i havent found a flaw with the copmini just yet.
@@YoungStatic thats awesome, im glad they're working with no issue man
Coil on Plug is a marked improvement. Sounds stout and even.
Wow your sponsored !! Im So happy the Channel is getting bigger and bigger by the minute!! Congrats Dana!!
I really enjoy watchin you do your thing man. I lost my best friend a year ago on Halloween and you look like him too. We were Honda Brothers and I miss him but in still build my cars and have my fun . I'm actually AWD converting my turbo EP3 soon. I wish i could show you how it is now. I'm a fabricator and machinist.
I installed the hondarulez kit myself (i.e soldering the knock board pinout on the ecu) it wasn`t hard to install and runs great (neptune on an lsvtec).
I remember that you chased down Brent from PFI like a blood hound to tune your car , yet you are going to someone else now , I was looking forward to seeing that collaboration. . .
He should go to pfi they know there shit and if any alittle problems they will fix right away.
I still am. This was to get the car going for track.
YoungStatic you need a new tuner bro
@@redzonedb8 🙉 lol
Why not learn how to tune? - Statictuned 😎
The torque mount finger snap was spot on!
That system looks nice 👍 and I finally got my hands on a complete ep3 head for my k20/k24a1 build bro and watching the update on your REX got me so pumped I can’t wait to get this build really going because my dad just found a complete, one owner 89 CRX Si but I have to get it shipped over seas... Keep doing what you doing bro 💯👍🤙💪
why would you want a k20a3 head???
Your brother wagon is sick.... That pull got sounds sick...
Welcome back to the channel 😎
Quality definitely better then the last👌🏾
That's one sweet ecu .like that cover
Love the civic I used to have a 89 hatch with a b18a and a gsr head but lent it to a friend and well don't have it anymore keep up the work on them cars bro
Like butter baby auri crx is going tovbe a beast once its tuned keep up the awesome work fam much aloha from 808
#hawaiianfam
Always dig your vids. Keep them coming. Thanks for the inter web.
Static is that a ghost by the other side of the door where you friend at? Or is just another person in the space between the 2 doors??
at what time?? Lol
I have to check the video again to see what time but I have the screenshot of it what's your IG account to send it to you
Nevermind I found you ig already and send you the screenshot go check that out.
Great work static crx looking good man 🙌🤙
@youngstatic I own a 2005 Honda Element with a 5 speed. What are some drawbacks of my engine head? I hear that the VTC is only on the intake side. Can I still slap a turbo kit on and just enjoy having a boosted engine. Or will it be pointless without a head swap? I am just inspired to boost by your videos.
Hope next video I see you at PFI. Sent you a little somethin something at your PO Box. Hope you can use it.
-damon
2669 or denso ik27 is what you’d like but 2668 are good also.
Any K24 plug should work for this setup? An Element just hit the yard and maybe can pick up those.
Keep the content coming bro.i have a d16 del sol
Yo CRX looks sick! 👊
What Up
@@hondagarage7117 sup
@@Idkwhat464 ✌🏻🐢
Hell yeah brother
What’s sup #YgStatic, nice to see your bro wago moved again 👍
Dope. I would like to see the dyno runs.
No mames hahaha I had to play that twice! Great video like always man. Watching all the way here in the Deep South GA!
Hello 1st from the 206!
Meow meow is ready for the track static lol
Canning wait for the dyno vid
Hey static what milwakee powertools do you mainly use for your videos?
thats kool static
Use stock over the accels they are good for over 800whp
With the fab skills you got,just make a distributor delete cap🤓
What’s the size for the rims on the Toyota pickup and what brand do you work on it also?
hahaha.. Lucy was trying to be one of those bobble heads on the dash. No mames lol
How do you not have 100k subs yet ive been watching since 20k
Oh yeah!!!!
Does anybody know if this kit will work on a p72 ecu? I know that the p72 has the knock sensor board components on that side that the hondarulez board goes. Can anyone give me advice on this or know if i can delete the p72 knock sensor board?
The knock board will need to be removed as the COPMini uses those connections.
@@reboo0t if i desolder the connections the ecu will still work like normal right? I have a p72 with a s300. So i always disable knock/IAB. Will the ecu run normal if i remove it?
@@coolaznking99 Yes you'll be fine. If you decide to have us install it, I can switch the P72 for a P28. Free install, just pay shipping.
Yes it will work on a p72 I’m an authorized dealer of the hondarulez cop mini hit me up on Instagram @hiboost_motorsports or on Facebook hiboost motorsports
@@jasonhiboost9149 thanks for the reply guys! i will definitely be in contact if i have anymore questions.
Another great video💪💪💪💪💪
Can't wait to see you riping through the gears
On another things,being a car audio guy in the past can help to notice the alpine deck
Are you keeping a basic setup or gonna be adding some tunes??
I mean the sounds of boost are golden but to me is not a real
"Street car" without sounds
i had mid/sub amps, 4 6.5s and a 10' L5. but i just have side speakers now. i also just listen to the radio now.
Where did you get the COP kit?
I would love a built2drive cover but i have hondata kit bro
let's get our boy to 💯k subs ❤️❤️❤️❤️❤️❤️
The Oh yaaaa part lol
This car is clean as fuck
Also those pins are the cheap china terminal pins not obd1 or obd2 sorry.
What that cop system hit 4 if your not sponsored
Wass good bro. U khmai or Lao??
khmai
YoungStatic had to ask. Aww Kunz for ur reply bro. I’m khmai too yee
So much for pfi tuning it
Hey bro I'm a subscriber love ur work but it seems like when I ask any TH-camr question no one response. My question is what harness to get for k20 with a 6spd transmission to get for an ek?
I heard something a about a charge harness I have the complete rsx car to do the swap
You need the k swap conversion harness to use the stock k20 harness but must be from an 02-04 chassis.
It's like butta baeebe🤙🤙👍👍👍
Yo i need your help i got a 2012 honda civic si shifting issues
There are the same k24 k20 coils ,spark plug are different
Where to find that spark cover?
Y Joe got them autozone colors!!!???
Use to work at oreillys
Yeh I see he left us 😔😔😔
Just wondering why you just didn`t swap a newer coil pack engine in.
They are a dime a dozen.
Nice..... 👌🏽
No mammesssss
Dude help!! My heater wont work. I get fans to blow, i can turn the heat from cold to hot, i flushed the heater core, i put in a new thermostat, but no heat. No one seems to know other than a new heatercore, and i really really really dont want to take the dash out of my CRX to get to it.. Anything else i can try.. Thanks man.
Flow test it . disconect both heater core lines hook up a garden hose turn it on and see if water comes out the other hose of it doesnt its probably clogged up . if it does flow . then most likely the valve that turns the heater core on is broken or stuck .if I remeber right its cable driven valve
@@dabtech7456 thanks Dru, but yeah that was first thing i did. flushed it both ways no flow issue at all. I also unhooked the cable driven valve and turned it back and forth by hand, from one side to the other still no heat.
Is the temp getting hot enough on car does temp go up to half way
@@figuresix ok id check the valve . ive had the valve break on the inside .it would look like its opening and closing but the internals are not rotating the lil ball valve seperated
@@ninablatchley842 temp hits about middle, not quite center.
Are you from Hawaii?
no sir.
YoungStatic damn thought when you said you flew your old tuner out from Hawaii assumed you lived there before.
Ryan E I’m currently living in Hawaii and I’m originally from the Bay Area northern Cali and I co-own a dyno In nor cal and flew out to tune cars. I also remote tune.
redzonedb8 dope lived in the same places. You work on specific cars or all makes?
Ryan E I am better known for Honda’s but I do other cars and systems as well.
Goldenn man!!! No mames gato😂😂
What fuel pump are you running ?
fuel it 390 (same as AEM 390) inline pump
Your videos are great Lucy is very cute.
Wagon was moving
I got hatch H22 Jdm let's make viedeo of something
No PFI ?
He had said in a previous video that he wanted RedZone to give it a tune so he can race at an upcoming event, PFI eventually tho
Derek Junk 👍👍
Woooowww!
Pfi 💯💯💯💯💪🏿💪🏿💪🏿💪🏿
Oooh yea first to .. put a like.. g..👍👍👍 n first to coment... love your. Videos.. man keep them coming... alot of knowledge n inspiration...
Your a fucking genius 💯😅
NO MAMESS! “
alphant1 no-body asked you’
alphant1 im in mexico dumbass🤣
alphant1 plus the us doesnt have english as its official language
alphant1 i can come and go as i please
alphant1 come do something about it pussy, I’ll be waiting while i live off the taxes you pay;)
Here
hello bro..u look like a malaysian guy lol
I got inspired by you and started a Honda build and a TH-cam channel from Australia check me out ❤️❤️❤️❤️
👀👌💪🎯
4554
No mames 😂😂
Wow never seen this before from TH-cam.....12 views and 12 likes man the few time TH-cam isn't broken lol
It was 11 likes till I got to it lol
Bro, don't do coilpack... has misfire issues....
Do Oem Honda distributors with good wires and spark plugs..
Only has misfire issues if done wrong. Or wrong computer set up.