Hey buddy, Yup I agree that sucks for Tim. Feel bad for him. Having a new machine with all of those issues happening. He’s got it at the dealer now. Thanks it’s going to be covered under warranty. Thanks for checking out the video, my friend much appreciated!
@@kcatv9556 you are so welcome thanks for posting content.. wish me luck i go look at a cfmoto 800xc on Sunday. 12/3/23 hope it all goes good. Better then the wasted trip to south dakota for the other one lol..
Beauty view right off the hop and some awesome trails in this video! Loved it! 7:40 - exactly! No sense in taking all the well traveled trails. What fun would that be - lol 11:00 - Nice spot! 15:39 - HAHAHAHA!!! 18:18 - lol - sounds like y'all have been watchin' Q-Tube too much - HAHAHA!!! 20:25 - HOLY CRAP! Glad he didn't get hurt! 24:53 - that is such a cool spot! 25:58 - BAHAHAHA!!! Poor Rolly Poly! He ain't never gonna live that down - lol That sucks about Tim's Grizzly. Very rare to get a "yellow" Yamaha. They normally just don't have any issues; you just drive them. Awesome video buddy! Thanx for the tour!
Hey buddy, oh yeah, no doubt we’ve been watching some Q tube! Woohoo Yup really fun trails in that area! Some cool creeks too. Yup Nick got his nickname, Rolly he’ll never live that one down. Not sure what the deal was with Tim ‘s machine? Sure had a lot of issues with it! I Feel bad for him! Thanks for watching buddy appreciate you dropping a comment!
As usual, awesome ride. Looks like some fun trails to ride. To bad about your buddy motor blowing up. Maybe over heated and blew head gasket. Thanks for taking us along.
Hey Shawn, Yeah, for sure those trails in that area are really fun and you can always find some cool spots down by the creeks! That’s what we were thinking about the grizzly most likely got hot, blew the head gasket! It was pumping coolant out the exhaust pipe, that’s not good! It sucked. He wasn’t able to ride with us the next day. Thanks for checking out the video buddy!
I have a 2020 Grizzly and that plastic timing plug got loose on mine as well. I discovered the problem when I noticed milky oil in the crankcase when I checked the oil. I had been riding in water just over the floorboards prior to that. Apparently the water got sucked in around the loose plug. I tightened the plastic plugs and changed oil and filter. No more problems so far. It’s one of those things that Grizzly owners should check from time to time. A metal plug would be better that could be tightened a bit more.
Hi there, Yup good idea to keep an eye on that plug. Make sure it’s not getting loose. Plastic plug is not a good idea either like you say metal would have been better. Good thing you caught yours and got the oil changed. Hopefully you’ll be good from here on out. Thanks for checking out the video and dropping a comment!
Hey mornin Rod, yeah that’s a bummer Tim wasn’t able to ride with us the next day. Hopefully the dealer will get his machine all fixed up for him. Thanks for checking out the video buddy. Much appreciated!
That was a fun , interesting ride it got scary there for a moment. Don’t see how anyone doesn’t cut a tire riding on those rocks. Good job ! Thanks for sharing ! Oh and there was that nice view !!
Hey Phillip, yeah for sure those are some of the funnest trails in that area. Never had an issue cutting tires on those rocks. Yep surprises me too. Thanks for checking out the video buddy, and appreciate your dropping a comment!
I had an old Kodiak 400 that overheated because the water pump came apart. Put a new water pump on it and then drove 5 hrs to a weekend ride out of state, only to have it do the same thing as that 23 Grizzly when I got there, blowing water out the exhaust due to a bad head gasket from whenever it overheated. Not sure why it ran fine at the house before I loaded it on the trailer. Threw a new head gasket on the next weekend and it ran perfectly again. That kind of stuff sure can ruin a weekend though.
Hi Tristan, Yeah, for sure that type of stuff can ruin a weekend. I’m sure if Tim’s machine overheated pretty good since it was pumping water out the exhaust pipe when we started it. Thanks for checking out the video and dropping a comment. We really appreciate it!
Super nice view 55 seconds in! Wow! Loved the river spot around the 5 minute mark. Is there any fish in there?! Crazy CF-Moto tipping over. Looks like he was riding that wall pretty high. What was he thinking? 😂 I'm glad it was nothing too serious, though. Live and learn, move on. We all do. Your buddy should check into getting Yamaha to buy back that machine! Oh boy, it seems like a lemon. Great video. Thanks for sharing, buddy.
Hey buddy, I doubt there is any fish in the rivers. They get so low during the summer would be hard for fish to stay alive. Yeah, Nick must have been riding the wall too much when he tipped his machine. I think Tim said the dealer is going to warranty the engine on his machine. That’s a good thing! Thanks for checking out the video buddy. Much appreciated!
Hey Norm! Haha Yup bit of an angle for Nick LOL Everything OK though he’ll know better for next time. Yup beautiful trails in that area. Thanks for watching my friend and dropping a comment!
Just found your channel a few months ago. I really enjoy it. Though I’ve subscribed with notifications the TH-cam algorithms seem to ignore you. Though I have finally memorized which channel you are as on occasion I still need to search you out. Anyway after a couple of weeks in, any word on the broken Grizzly? Here in eastern 🇨🇦 just north of Maine I have a 2021 Grizzly SE, It’s the same as the 🇺🇸 XLT. Looking forward to your next video.
hi Gary, appreciate you checking out our channel and subscribing! Hopefully you enjoy our videos. Yes, he took the grizzly to the dealer and they are planning to cover everything under warranty. He didn’t say exactly what they were going to do replace the engine or what? He said it’s still there. They’ve been waiting on parts so that kind of sucks for him it’s taking so long. Appreciate you checking out the videos!
Looks like another great ride! Man you guys hit a ton of our favorites. I feel bad for "Rollie" that could happen to anybody, it's never fun. But you learn from it and go on. What is going on with this Yamaha man? I've never seen a Yamaha with issues. They just don't happen. This is getting crazy. Isn't that thing like brand new? They must've built that thing late in the day on a Friday or something. I'm curious what he's going to do at this point with it? I hope insurance or warranty will cover the damages? Thanks for taking us along! Look forward to the next one.
Hey buddy, Yup those are some of our favorite trails there. I’m sure you’ve hit a lot of them as well. Yeah, can you believe how low the big Piney was? We have all had a tip over like that at some point. Just learn from it. That way you don’t do it again.. LOL Not sure what the deal was with Tim’s Yamaha? That thing had all sorts of issues that weekend. Thanks for watching bud and dropping a comment!
It was a great day. Till the end. I still had a great time even tho it got cut short. I will be back. Thanks to you grizzly and Brian for trying to get it going.
Hey Tim, Yup that’s a bummer you weren’t able to ride with us the next day. Hopefully the dealer gets everything put back together correctly and you don’t have any issues. Thanks for checking out the video, my friend. Much appreciated!
Hey Steve, Yup 2023 and yeah, I feel bad for him. New machine having all of those troubles. He’s got it at the dealer now. Hopefully they’ll cover everything under warranty. It was less than six months old. Thanks for checking out the video, my friend much appreciated!
That was a great ride! I am with you on having to take anything that looks like a trail or less traveled. I have often found some cool things at the other end besides a dead end, plus who could argue with it being more adventurous. That one spot where the CFMoto was on its side was crazy. Glad you guys figured out what was the best way through. What a bummer for your buddy on the Yamaha. I hope Yamaha is willing to help him out or something. That is a problem you'll never forget. Take care man.
Hey buddy!, Yeah, for sure we always take the trail less traveled when we can. Yep there was a Really cool spot down by the creek at the end of that trail. The CFmoto Issue was a sketchy spot. He just got too high on one side and tipped it over. Yup everybody else made it through safely. Tim when he got back home to South Dakota took his Yamaha to the dealer. Unfortunately they still have it but I guess they’re going to cover everything under warranty. Thanks for checking out the buddy always appreciate it!
Man that is awesome Yamaha is going to cover everything under warranty. I hope to see him out soon on rides with y'all. Have a good one man. @@kcatv9556
I have questions LOL, #1 where y'all from that you ride the Ozarks all the time? You guys ever get up into minnesota/wisconsin trails? and #3 Whats the deal with those dot mirrors y'all got on the consoles?
Hi Gravel, we have not been up that way to ride. We live in Kansas about a 5 Hour Dr. for us to get to the Ozarks in Arkansas. The small mirror is so we can look at it and see our camera. Make sure we are recording. Hope that helps you out. Thanks for checking out the video!
Im just across the border in Iowa, Son n law is building a house by Rhinelander wisconsin. Says there's tons of trails everywhere up that way @@adampecore6917
Hi Ryan, are there trails in that area? We post upcoming rides on our group Facebook page Is KC ATV Check it out if you would like. Thanks for checking out the video. Really appreciate it!
Yes sugar camp national forest scenic byway is full of trails. Gravel roads, slate pit, smooth runs, some mud, ledge rock, tough climb, even river rock bars in the bottom. Where you ride along the edge of roaring river itself. Only one area I will not do again deep/steep V.
@@ryanlynxwiler3676 hey Ryan, don’t know what’s up with TH-cam . This comment just came through. Looks like you posted it three days ago.LOl Thanks for the reply. If you want to post information about it on the face group page, feel free to do so I bet other folks would like to hear about this place as well.
Hey Philip, thanks for the tip on the ride park. We are always looking for a new places to ride. Haven’t been there before. I’ll make a note of that for a future ride. Thanks for stopping by checking out the vid and dropping a comment!
@@kcatv9556 yes sir, that park has the lost boat, the dome, a great look out point, and a train tunnel that you can ride through. I think yall would like it.. some beautiful scenery ! Mabe i will see yall there one day..
Hi David, we are using the Avenza app on my phone. You download the app to your phone and then you download maps from different areas. I like it. It works pretty well. Hope that helps you out. Thanks for checking out the video.
Another great one young man enjoyed it all very much I haven't been on here in a good while and its great to see you all still at it
Hi Michael, glad you enjoyed the video! We appreciate you checking them out!
Awsome video.. that sucks at the end. Brand new machine and its gotta do that. Hope it gets all fixed up. Can't wait until the next video.
Hey buddy, Yup I agree that sucks for Tim. Feel bad for him. Having a new machine with all of those issues happening. He’s got it at the dealer now. Thanks it’s going to be covered under warranty. Thanks for checking out the video, my friend much appreciated!
@@kcatv9556 you are so welcome thanks for posting content.. wish me luck i go look at a cfmoto 800xc on Sunday. 12/3/23 hope it all goes good. Better then the wasted trip to south dakota for the other one lol..
@@Bennett-xo6iu good luck on getting your new machine!
@@kcatv9556 thank you
Beauty view right off the hop and some awesome trails in this video! Loved it!
7:40 - exactly! No sense in taking all the well traveled trails. What fun would that be - lol
11:00 - Nice spot!
15:39 - HAHAHAHA!!!
18:18 - lol - sounds like y'all have been watchin' Q-Tube too much - HAHAHA!!!
20:25 - HOLY CRAP! Glad he didn't get hurt!
24:53 - that is such a cool spot!
25:58 - BAHAHAHA!!! Poor Rolly Poly! He ain't never gonna live that down - lol
That sucks about Tim's Grizzly. Very rare to get a "yellow" Yamaha. They normally just don't have any issues; you just drive them.
Awesome video buddy! Thanx for the tour!
Hey buddy, oh yeah, no doubt we’ve been watching some Q tube! Woohoo
Yup really fun trails in that area! Some cool creeks too.
Yup Nick got his nickname, Rolly he’ll never live that one down.
Not sure what the deal was with Tim ‘s machine? Sure had a lot of issues with it! I Feel bad for him!
Thanks for watching buddy appreciate you dropping a comment!
As usual, awesome ride. Looks like some fun trails to ride. To bad about your buddy motor blowing up. Maybe over heated and blew head gasket. Thanks for taking us along.
Hey Shawn, Yeah, for sure those trails in that area are really fun and you can always find some cool spots down by the creeks!
That’s what we were thinking about the grizzly most likely got hot, blew the head gasket!
It was pumping coolant out the exhaust pipe, that’s not good!
It sucked. He wasn’t able to ride with us the next day.
Thanks for checking out the video buddy!
Good to see you all going strong keep on rolling!
Hi Michael, We appreciate you checking out the videos!
I have a 2020 Grizzly and that plastic timing plug got loose on mine as well. I discovered the problem when I noticed milky oil in the crankcase when I checked the oil. I had been riding in water just over the floorboards prior to that. Apparently the water got sucked in around the loose plug. I tightened the plastic plugs and changed oil and filter. No more problems so far. It’s one of those things that Grizzly owners should check from time to time. A metal plug would be better that could be tightened a bit more.
Hi there, Yup good idea to keep an eye on that plug. Make sure it’s not getting loose. Plastic plug is not a good idea either like you say metal would have been better.
Good thing you caught yours and got the oil changed.
Hopefully you’ll be good from here on out. Thanks for checking out the video and dropping a comment!
Looks like a great ride! That's too bad Tim's machine went down. Hopefully the dealer gets it all fixed up. Can't wait for the next one!
Hey mornin Rod, yeah that’s a bummer Tim wasn’t able to ride with us the next day.
Hopefully the dealer will get his machine all fixed up for him.
Thanks for checking out the video buddy. Much appreciated!
Great video! Thanks for the content from Alabama.
Hello Michael, we appreciate you checking out the video and dropping a comment!
That was a fun , interesting ride it got scary there for a moment. Don’t see how anyone doesn’t cut a tire riding on those rocks. Good job ! Thanks for sharing ! Oh and there was that nice view !!
Hey Phillip, yeah for sure those are some of the funnest trails in that area. Never had an issue cutting tires on those rocks. Yep surprises me too.
Thanks for checking out the video buddy, and appreciate your dropping a comment!
always a good ride - GOD BLESS
Thanks for checking out the video!
Great that guy with the CF didn't tip too hard/much, have to be careful at those places.
Hey buddy, Yup I agree no damage was done to the machine or him! LOL Thanks for checking out the video. Much appreciated!
I had an old Kodiak 400 that overheated because the water pump came apart. Put a new water pump on it and then drove 5 hrs to a weekend ride out of state, only to have it do the same thing as that 23 Grizzly when I got there, blowing water out the exhaust due to a bad head gasket from whenever it overheated. Not sure why it ran fine at the house before I loaded it on the trailer. Threw a new head gasket on the next weekend and it ran perfectly again. That kind of stuff sure can ruin a weekend though.
Hi Tristan, Yeah, for sure that type of stuff can ruin a weekend.
I’m sure if Tim’s machine overheated pretty good since it was pumping water out the exhaust pipe when we started it.
Thanks for checking out the video and dropping a comment. We really appreciate it!
Super nice view 55 seconds in! Wow! Loved the river spot around the 5 minute mark. Is there any fish in there?!
Crazy CF-Moto tipping over. Looks like he was riding that wall pretty high. What was he thinking? 😂 I'm glad it was nothing too serious, though. Live and learn, move on. We all do.
Your buddy should check into getting Yamaha to buy back that machine! Oh boy, it seems like a lemon.
Great video. Thanks for sharing, buddy.
Hey buddy, I doubt there is any fish in the rivers. They get so low during the summer would be hard for fish to stay alive.
Yeah, Nick must have been riding the wall too much when he tipped his machine.
I think Tim said the dealer is going to warranty the engine on his machine. That’s a good thing!
Thanks for checking out the video buddy. Much appreciated!
@kcatv9556 Hopefully, he gets it all fixed up! You just don't hear about Yamahas breaking down.
@@ElevationATVyup i’ve had no trouble with ours, but they were built before pandemic. Who knows?
I enjoy your trail riding videos and would like to ride with you sometime. I have a cfmoto 2 up. I'm guessing they do well on the trails.
Hi Robert, yes, your machine should do quite well on the trails. Glad you enjoy our videos. We really appreciate you checking them out!
Wow some trails kc bit action on a angel lol . Sucks guys motor trouble but at least everyone got back ok . Look like great ride otherwise cheers 👍
Hey Norm! Haha Yup bit of an angle for Nick LOL
Everything OK though he’ll know better for next time.
Yup beautiful trails in that area. Thanks for watching my friend and dropping a comment!
Just found your channel a few months ago. I really enjoy it. Though I’ve subscribed with notifications the TH-cam algorithms seem to ignore you. Though I have finally memorized which channel you are as on occasion I still need to search you out. Anyway after a couple of weeks in, any word on the broken Grizzly? Here in eastern 🇨🇦 just north of Maine I have a 2021 Grizzly SE, It’s the same as the 🇺🇸 XLT. Looking forward to your next video.
hi Gary, appreciate you checking out our channel and subscribing!
Hopefully you enjoy our videos.
Yes, he took the grizzly to the dealer and they are planning to cover everything under warranty. He didn’t say exactly what they were going to do replace the engine or what?
He said it’s still there. They’ve been waiting on parts so that kind of sucks for him it’s taking so long.
Appreciate you checking out the videos!
Looks like another great ride! Man you guys hit a ton of our favorites. I feel bad for "Rollie" that could happen to anybody, it's never fun. But you learn from it and go on.
What is going on with this Yamaha man? I've never seen a Yamaha with issues. They just don't happen. This is getting crazy. Isn't that thing like brand new? They must've built that thing late in the day on a Friday or something. I'm curious what he's going to do at this point with it? I hope insurance or warranty will cover the damages? Thanks for taking us along! Look forward to the next one.
Hey buddy, Yup those are some of our favorite trails there. I’m sure you’ve hit a lot of them as well. Yeah, can you believe how low the big Piney was?
We have all had a tip over like that at some point.
Just learn from it. That way you don’t do it again.. LOL
Not sure what the deal was with Tim’s Yamaha?
That thing had all sorts of issues that weekend.
Thanks for watching bud and dropping a comment!
It was a great day. Till the end. I still had a great time even tho it got cut short. I will be back. Thanks to you grizzly and Brian for trying to get it going.
Hey Tim, Yup that’s a bummer you weren’t able to ride with us the next day.
Hopefully the dealer gets everything put back together correctly and you don’t have any issues.
Thanks for checking out the video, my friend. Much appreciated!
Good ridge guys, bummer on the head gasket. Was that a 2023 did I hear that right?
Hey Steve, Yup 2023 and yeah, I feel bad for him. New machine having all of those troubles. He’s got it at the dealer now. Hopefully they’ll cover everything under warranty. It was less than six months old. Thanks for checking out the video, my friend much appreciated!
That was a great ride! I am with you on having to take anything that looks like a trail or less traveled. I have often found some cool things at the other end besides a dead end, plus who could argue with it being more adventurous. That one spot where the CFMoto was on its side was crazy. Glad you guys figured out what was the best way through.
What a bummer for your buddy on the Yamaha. I hope Yamaha is willing to help him out or something. That is a problem you'll never forget. Take care man.
Hey buddy!, Yeah, for sure we always take the trail less traveled when we can. Yep there was a
Really cool spot down by the creek at the end of that trail.
The CFmoto Issue was a sketchy spot. He just got too high on one side and tipped it over.
Yup everybody else made it through safely. Tim when he got back home to South Dakota took his Yamaha to the dealer. Unfortunately they still have it but I guess they’re going to cover everything under warranty.
Thanks for checking out the buddy always appreciate it!
Man that is awesome Yamaha is going to cover everything under warranty. I hope to see him out soon on rides with y'all. Have a good one man. @@kcatv9556
Beautiful trails
Thanks for checking out the video and leaving a comment!
I have questions LOL, #1 where y'all from that you ride the Ozarks all the time? You guys ever get up into minnesota/wisconsin trails? and #3 Whats the deal with those dot mirrors y'all got on the consoles?
Hi Gravel, we have not been up that way to ride.
We live in Kansas about a 5 Hour Dr. for us to get to the Ozarks in Arkansas. The small mirror is so we can look at it and see our camera. Make sure we are recording.
Hope that helps you out. Thanks for checking out the video!
I’d be up for an MN/WI ride if you guys come up!
Im just across the border in Iowa, Son n law is building a house by Rhinelander wisconsin. Says there's tons of trails everywhere up that way @@adampecore6917
Sucks about the Grizzly. I will be checking mine for sure. What size tire is he running & are they Megabites or Terrabites?
I believe they are Megabytes, 27”
Yeah, that sucks. He had issues with a new machine like that. Thanks for checking out the video appreciate it!
Also I forgot to ask. Why the little round mirror on your dash?
The mirror is so I can look at it and see the camera if I’m recording or not.
I'd love to ride with you. If you ever get over to Sugar Camp Tower. It's just up the hill from Roaring River State Park in Cassville MO.
Hi Ryan, are there trails in that area?
We post upcoming rides on our group Facebook page
Is KC ATV
Check it out if you would like. Thanks for checking out the video. Really appreciate it!
Yes sugar camp national forest scenic byway is full of trails. Gravel roads, slate pit, smooth runs, some mud, ledge rock, tough climb, even river rock bars in the bottom. Where you ride along the edge of roaring river itself. Only one area I will not do again deep/steep V.
@@ryanlynxwiler3676 that sounds interesting! Do you camp in the area and ride directly to the trails?
You can camp on site & leave from camp. I drive over from Cassville about 20 minutes away.
@@ryanlynxwiler3676 hey Ryan, don’t know what’s up with TH-cam . This comment just came through. Looks like you posted it three days ago.LOl
Thanks for the reply. If you want to post information about it on the face group page, feel free to do so I bet other folks would like to hear about this place as well.
Hey bub. Long time no talk.. lol
Hey if yall ever in ky you gotta check out Wildcat atv park in east bernstant ky... awsome park,. I go every year...
Hey Philip, thanks for the tip on the ride park. We are always looking for a new places to ride. Haven’t been there before. I’ll make a note of that for a future ride. Thanks for stopping by checking out the vid and dropping a comment!
@@kcatv9556 yes sir, that park has the lost boat, the dome, a great look out point, and a train tunnel that you can ride through. I think yall would like it.. some beautiful scenery ! Mabe i will see yall there one day..
What do you guys use for comms? Sounds so clear.
We are using the Sena 30K units from Sena,com Sorry for the delayed response. Missed your comment. Thanks for checking out the video.
I have a question I am from SWMO and looking for GPS trail maps software. What do you use and how do you like it?
Hi David, we are using the Avenza app on my phone.
You download the app to your phone and then you download maps from different areas. I like it. It works pretty well. Hope that helps you out. Thanks for checking out the video.
Now becaus of you i put my winch Line same place as yours
Haha right on! Makes it much easier to get to the hook. Thanks for checking out the video!
I'm from Michigan
Hi Frank, thanks for turning in there from Michigan. We appreciate you watching!
I stopped watching when you all went around the mud holes.
Well, thanks for watching as much as you did.