The placement of the Liquid freezer is also specific in connection with gurgling and water cooling. Pump on CPU must be head down and the hoses must go down to the cooling element, so do not place them high on top of the radiator. So basically sideways placing fills the compartment only half with a lot of air bubbling. Placing the hose on top creates air accumulation on top therefore not transporting enough water through the radiator, so less cooling and high risk of gurgling.
How did you get to have your I/O shield from the motherboard fit so well in that case ? I have the MSI Tomahawk b650 and I can't align the MB with the standoffs because the I/O shield won't fit the back of the case
I mean not everybody can afford it. Nice video tho, i will build in this case with this watercooler, a 5900x and a 3080ti. Will be my first build so i am very grateful that such videos exist
SSD speed in the first and second slots is the same. But the upper SSD slot will be more heated by the video card. So I installed it in the lower slot.
@@SiriaK Wait really? I installed my M.2 SSDs on the second and third slot of the Z590 Aorus Master because I have a 10th gen CPU and can't install on the first one and my GPU shows as x16.
agree 100% ,many do this installation but is technically wrong.radiator pipes-tubes must be lower than cpu cooler(pump),,thats why i dont understand why ppl install aio on the top,who started this at the first place?
@@21777gabriel i believe the pump is actually in the tubes on this model. even still, he has the pump sitting higher than everything else, which is wrong
I am pretty sure it will fit cause i know a trustworthy prebuilding company and there you can even order a 3090 aorus master with these kind of pure loop coolers in this pure base 500dx. And yeah you can also order 6800xts and 6900xts with this setup in this case
Hi! Great video. There's a possibility to put that specific radiator on the top? I saw some videos where ppl put 280 on the top and fit well but I'm worried because of the space.
Is there any specific reason you pick 280cm water cooler rather than 360cm one ? Is the cooling performance better with 280cm ? I've just bought this case recently and I'm planning to use water cooling too 😁
Nice build but your AIO is upside down. It would have been better for your AIO pump to install the radiator inverted from the way you have it to avoid percolator noise and premature pump failure: th-cam.com/video/DKwA7ygTJn0/w-d-xo.htmlsi=btQ2GYpFlb4RsLtA
I understand. I literally just opened mine today and will confirm the 360mm be quiet raditor will not install correctly even with short 2 fan video card. I like the case, so I am returning the radiator. I dont want to have to take it out once every 6-9 months to put more liquid in it to keep the motor from trying to pump air. @@pclab1755
The placement of the Liquid freezer is also specific in connection with gurgling and water cooling.
Pump on CPU must be head down and the hoses must go down to the cooling element, so do not place them high on top of the radiator.
So basically sideways placing fills the compartment only half with a lot of air bubbling.
Placing the hose on top creates air accumulation on top therefore not transporting enough water through the radiator, so less cooling and high risk of gurgling.
Front is fine, the be quiet pure loop 2 fx has its pump on the tubes.
The plug you plugged in at 9:09 , I have the same wire on my Case but no where to plug it into on the motherboard (b450 wifi edition). What do i do?
How did you get to have your I/O shield from the motherboard fit so well in that case ? I have the MSI Tomahawk b650 and I can't align the MB with the standoffs because the I/O shield won't fit the back of the case
Nicely done! I guess maybe it would be better with Nvidia 30-series instead of 20-s, but it's a still a solid setup anyway
Thank you for your comment. Unfortunately, RTX3000 is still very expensive in our country.
I mean not everybody can afford it. Nice video tho, i will build in this case with this watercooler, a 5900x and a 3080ti. Will be my first build so i am very grateful that such videos exist
are your audio cables sitting on top of the psu
Why you put intake fans in your aio they will intake the hot air in the case ?
Why did you install the M.2 SSD to the secondary slot instead?
SSD speed in the first and second slots is the same. But the upper SSD slot will be more heated by the video card. So I installed it in the lower slot.
@@pclab1755 I'm not sure about MSI board, but that limits the PCI Express Link to X8 for the graphic card on Gigabyte board.
@@SiriaK Wait really? I installed my M.2 SSDs on the second and third slot of the Z590 Aorus Master because I have a 10th gen CPU and can't install on the first one and my GPU shows as x16.
А свитерок покупной , или вязанный в домашних условиях ?
Thank you for your comment. I said hi to my grandmother, who knitted a sweater ;)
@@pclab1755 лайк ей :)
The AIO radiator is flipped the wrong way up...just an FYI for when you hear the gurgling of the water pump
agree 100% ,many do this installation but is technically wrong.radiator pipes-tubes must be lower than cpu cooler(pump),,thats why i dont understand why ppl install aio on the top,who started this at the first place?
@@21777gabriel i believe the pump is actually in the tubes on this model. even still, he has the pump sitting higher than everything else, which is wrong
long as the cpu isnt the highest point of the radiator then its good.
@@21777gabriel AIO rad in the top of the case is actually the ideal mounting location if the pump is in the block.
Gracias por el video. Solo una pregunta: no sería suficiente con el M2? Por qué se sigue utilizando el antiguo Sata HD?
dude can you please help and measure your gpu clearance with the front AIO installed? I pre ordered a 6800 xt merc 319 and I'm worried it won't fit!
I am pretty sure it will fit cause i know a trustworthy prebuilding company and there you can even order a 3090 aorus master with these kind of pure loop coolers in this pure base 500dx. And yeah you can also order 6800xts and 6900xts with this setup in this case
Hi! Great video. There's a possibility to put that specific radiator on the top? I saw some videos where ppl put 280 on the top and fit well but I'm worried because of the space.
very helpful video.Thank you
thanks bro this video helpd me soo much
Hi this case capable using cooler master vertical gpu riser 1st model(old version)? Great satisfying build videos.
Скажите пожалуйста, интересует вариант когда СЖО будет сверху. Станет? Питание процессора не будет мешать установке?
mmm did u put ur psu fan looking down ?! it will choke !
No radiator fans?
Nice!!!
Is there any specific reason you pick 280cm water cooler rather than 360cm one ?
Is the cooling performance better with 280cm ?
I've just bought this case recently and I'm planning to use water cooling too 😁
Suberb! This video is very useful for me
Hey nice build, does that case comes with 2 or 3 fans? Thanks in advance :)
Comes with 3, one at the front, one at the top and one at the bottom
Pump should be down not up
Dexter ?
Put ur AIO uptop or u will have some Issues soon
Очень понравилось.
Thank you for your comment.
Шо цэ хлопци за инозэмный контэнт ?
Yes, I'm on an international level
Граце Амиго ;)
Nice build but your AIO is upside down. It would have been better for your AIO pump to install the radiator inverted from the way you have it to avoid percolator noise and premature pump failure: th-cam.com/video/DKwA7ygTJn0/w-d-xo.htmlsi=btQ2GYpFlb4RsLtA
In this case, the AOI system hoses will not reach the processor. The video card will interfere with the hoses.
I understand. I literally just opened mine today and will confirm the 360mm be quiet raditor will not install correctly even with short 2 fan video card. I like the case, so I am returning the radiator. I dont want to have to take it out once every 6-9 months to put more liquid in it to keep the motor from trying to pump air. @@pclab1755